Road Transport and Highways Government Departments Closing in 0 days TDR #22351053

Construction I/C Metalling And Blacktopping Of A Road From 38Th Km Of Mawphlang Balat Road To Ryngku ( 8 . 70 Km ) ( Mg/02/05/02 ) Upgradation Construction I/C Mbt

Issued by Government Departments · Mawphlang, Meghalaya
Tender Value
5.08 Crore
Estimated cost
Bid Submission
15 Nov 2019
0 days left
EMD
10.16 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mawphlang → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction I / C Metalling And Blacktopping Of A Road From 38Th Km Of Mawphlang Balat Road To Ryngku ( 8 . 70 Km ) ( Mg / 02 / 05 / 02 ) Upgradation Construction I / C Mbt

BOQ

Name of Work: Construction i/c Metalling and Blacktopping of a road from 38th Km of Mawphlang Balat Road to Ryngku (L= 8.70Km) - Upgradation
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11SITE CLEARENCE
21.01Clearing and Grubbing road land by mechanical means including uprooting rank vegetation, grass, bushes, shrubs saplings and trees of girth upto 300 mm, removal of stumps and stumps of trees cut earlier and disposal of unserviceable materials and staking of serviceable material with all lead up to 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification Clause 201.1.61Hac.
32EARTHWORK
42.01Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1777Cum
52.02Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per Clause 1603.2.194Cum
62.03Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11754.75Cum
72.04Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.522.5Cum
83BASE AND SUB-BASE
93.01GSB Grade 2- Construction of granular sub-base with locally available graded material, spreading in uniform layers with motor grader on prepared surface, watering to OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification/ direction of EE.263.25Cum
103.02WBM Grade 2- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405124.88Cum
113.03WBM Grade 3- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.124.88Cum
124Bituminous Work
134.01Prime Coat- Providing and applying primer coat with bitumen on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6-0.9 kg/sqm using mechanical means as per Technical Specification1665Sqm
144.02Tack Coat- Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.33165Sqm
154.03OGPC- Providing, laying and rolling of 20 mm thick Open Graded Premix Carpet using Bitumen as per Technical Specification Clause 508.2 composed of 13.2 mm to 5.6 mm aggregates to required line, grade and level to serve as wearing course on a previously prepared base, including mixing, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.33165Sqm
164.04Seal Coat- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 51033165Sqm
175CROSS DRAINAGE WORKS: 1X1.00 m Dia Pipe Culvert = 6 nos.
185.01Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.476.28Cum
195.02Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 120320.64Cum
205.03RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 1109160.44Cum
215.04Providing and laying reinforced cement concrete pipe NP3 (1000mm dia.) for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.37.5m
225.05Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, retaing wall, breast wall etc.32.4Cum
235.06Concrete cradle with M15 grade cement concrete as per Clause 1105 (i)5.058Cum
245.07Laying GSB material below pipe11.52Cum
255.08Backfilling in foundation trenches as per drawing and technical specification Clause 110813.86Cum
266CROSS DRAINAGE WORKS: REPAIRING INCLUDING CLEANING of CROSS DRAINAGE WORKS = 110 nos.
276.01Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.1100cum
286.02Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203150.7cum
296.03RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 1109271.7cum
306.04Maintenance of Slab type culvert by way of clearing, cleaning, Erosion repair, repairs of cracks, parapet wall and protection work as per drawing and technical specification Clause 1908110nos.
317RCC BRIDGE at Ch. 7.288 Km (15 m Span)
327.01Labour for dismantling all members of the timber bridge (except piles) and stacking them at suitable places as directed (all members will be under custody of the contractor till taken over by the Department)1L/S
337.02Subway Construction:- Construction of embankment with approved materials obtained from Borrow pit900cum
347.03Subway Construction:-Construction of granular sub-base with locally available graded material, spreading in uniform layers with motor grader on prepared surface, watering to OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification/ direction of EE.45cum
357.04Subway Construction:-Providing and laying reinforced cement concrete pipe NP3 (1000mm dia.) for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.20m
367.05Subway Construction:-Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 12034.5cum
377.06Subway Construction:-Concrete cradle with M15 grade cement concrete as per Clause 1105 (i)2.617cum
387.07Subway Construction:-RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 11094.35cum
397.08Subway Construction:-Backfilling in foundation trenches as per drawing and technical specification Clause 1108- GSM Material60cum
407.09Subway Construction:-RCC Guide Post3.925No.
417.1Earth work in excavation for foundation of structures as per drawings & technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.415.129Cum
427.11Plain/Reinforced Cement concrete, in Open Foundation complete as per Drawing and Technical Specifications.\nE. RCC M 25 Grade\nCase – I : Using Concrete Mixer\n(Refer to quantity estimation)95.918cum
437.12Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing60nos
447.13Plain/Reinforced Cement concrete, in Substructure complete as per Drawing and Technical Specifications.\nF. RCC Grade M 25\n1.Height up to 5.0 m\nCase – I : Using Concrete Mixer\n(i) Abutment Shaft\n(ii) Abutment cap\n(iii) Dirt wall\n(iv) Return wall\n(v) Pier79.854Cum
457.14Furnished and placing reinforcement /Prestressed cement concrete in Superstructure as per drawing and Technical Specifications.\nCase – I : Using Concrete Mixer\nB. RCC GRADE M 25\nFor RCC Solid Slab\n1) Height up to 5.0 m\n(Refer to quantity estimation)110.07Cum
467.15Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) -Superstructure7.372MT
477.16Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) - Base slab7.51MT
487.17Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) - Sub structure9.379MT
497.18Providing and laying cement concrete wearing coat M 30 grade including reinforcement complete as per drawing and Technical Specifications.\n(Refer to quantity estimation)6.6Cum
507.19Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC : 83 (Pt. II) Section IX and Clause 2005 of MoRT &H Specifications complete including all accessories as per drawing and Technical Specifications. \n(Refer to quantity estimation)50727.6cucm
517.2Drainage spouts complete as per approved drawings and technical specifications. \n(Refer to quantity estimation)10Each
527.21PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification14.07Cum
537.22Construction of pre cast RCC railing of M30 Grade in situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 center to center spacing between vertical post not to exceed 2000 mm leaving adequat44RM
547.23Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans, covered with sealant complete as per drawing & Technical Specification .\n(Refer to quantity estimation)12.8RM
557.24Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications.\nA. Stone/Boulder\nB. Cement concrete Blocks\n I) Concrete Grade M165.634Cum
567.25Providing and laying filter material underneath pitching in slopes as per drawing and technical specifications. \n(Refer to quantity of protection work)32.817Cum
577.26Providing and laying of boulder apron laid in wire crates made with 4 mm dia GI wire conforming to IS : 280 & IS : 4836 IN 100 mm x 100 mm mesh (Weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing n86.2Cum
588RCC BRIDGE at Ch.7.842 Km (15 m Span)
598.01Labour for dismantling all members of the timber bridge (except piles) and stacking them at suitable places as directed (all members will be under custody of the contractor till taken over by the Department) \n1L/S
608.02Subway Construction:- Construction of embankment with approved materials obtained from Borrow pit900cum
618.03Subway Construction:-Construction of granular sub-base with locally available graded material, spreading in uniform layers with motor grader on prepared surface, watering to OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification/ direction of EE.45cum
628.04Subway Construction:-Providing and laying reinforced cement concrete pipe NP3 (1000mm dia.) for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.20m
638.05Subway Construction:-Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 12034.5cum
648.06Subway Construction:-Concrete cradle with M15 grade cement concrete as per Clause 1105 (i)2.617cum
658.07Subway Construction:-RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 11094.35cum
668.08Subway Construction:-Backfilling in foundation trenches as per drawing and technical specification Clause 1108- GSM Material60cum
678.09Subway Construction:-RCC Guide Post3.925No.
688.1Earth work in excavation for foundation of structures as per drawings & technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.697.566Cum
698.11Plain/Reinforced Cement concrete, in Open Foundation complete as per Drawing and Technical Specifications.\nE. RCC M 25 Grade\nCase – I : Using Concrete Mixer\n(Refer to quantity estimation)63.945cum
708.12Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing60nos
718.13Plain/Reinforced Cement concrete, in Substructure complete as per Drawing and Technical Specifications.\nF. RCC Grade M 25\n1.Height up to 5.0 m\nCase – I : Using Concrete Mixer\n(i) Abutment Shaft\n(ii) Abutment cap\n(iii) Dirt wall\n(iv) Return wall\n(v) Pier114.303Cum
728.14Furnished and placing reinforcement /Prestressed cement concrete in Superstructure as per drawing and Technical Specifications.\nCase – I : Using Concrete Mixer\nB. RCC GRADE M 25\nFor RCC Solid Slab\n1) Height up to 5.0 m\n(Refer to quantity estimation)110.07Cum
738.15Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) -Superstructure7.372MT
748.16Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) - Base slab5.007MT
758.17Supplying, fitting and placing uncoated TMT bar reinforcement in foundation complete as per drawing and Technical Specification\n(Refer to quantity estimation) - Sub structure13.425MT
768.18Providing and laying cement concrete wearing coat M 30 grade including reinforcement complete as per drawing and Technical Specifications.\n(Refer to quantity estimation)7.92Cum
778.19Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC : 83 (Pt. II) Section IX and Clause 2005 of MoRT &H Specifications complete including all accessories as per drawing and Technical Specifications. \n(Refer to quantity estimation)50727.6cucm
788.2Drainage spouts complete as per approved drawings and technical specifications. \n(Refer to quantity estimation)10Each
798.21PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification14.07Cum
808.22Construction of pre cast RCC railing of M30 Grade in situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 center to center spacing between vertical post not to exceed 2000 mm leaving adequat44RM
818.23Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans, covered with sealant complete as per drawing & Technical Specification .\n(Refer to quantity estimation)12.8RM
828.24Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications.\nA. Stone/Boulder\nB. Cement concrete Blocks\n I) Concrete Grade M1143.301Cum
838.25Providing and laying filter material underneath pitching in slopes as per drawing and technical specifications. \n(Refer to quantity of protection work)71.65Cum
848.26Providing and laying of boulder apron laid in wire crates made with 4 mm dia GI wire conforming to IS : 280 & IS : 4836 IN 100 mm x 100 mm mesh (Weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing n153.705Cum
859Protection Work :- Retaining Wall (CRSM)- 135 m
869.01Excavation in soil hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 meters.533.841Cum
879.02PCC (1:4:8)-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plith level :- 1:3:6 (1 cement : 3 Coarse sand : 6 Graded stone aggregate 40 mm nominal size)94.5169Cum
889.03NET RRM (1:5 CM):- Providing and laying Random Rubble Stone masonry in cement morter 1:5 with bond stones through stone of size 150 mm x 150 mm manufactured in 1:4:8 (1 cement : 4 clean coarse sand and clean hand stone aggregate or 40 mm and down) clean hard selected stone including centering, aligning and slopes/eaves etc. all complete as per Engineer-In-Charge.231.708Cum
899.04NET RRM (DRY):- Providing and laying Hand packed wall with clean hard selected stone including centering, aligning and slopes curves etc. complete as per EngineeIn-Charge.185.267Cum
909.05H.P.S. Filling :- Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete.170.859Cum
9110Protection Work :- Breast Wall (CRSM)- 80 m
9210.01Excavation in soil hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 meters.309.027cum
9310.02PCC (1:4:8)-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plith level :- 1:3:6 (1 cement : 3 Coarse sand : 6 Graded stone aggregate 40 mm nominal size)50.18cum
9410.03NET RRM (1:6 CM):- Providing and laying Random Rubble Stone masonry in cement morter 1:5 with bond stones through stone of size 150 mm x 150 mm manufactured in 1:4:8 (1 cement : 4 clean coarse sand and clean hand stone aggregate or 40 mm and down) clean hard selected stone including centering, aligning and slopes/eaves etc. all complete as per Engineer-In-Charge.135.301cum
9510.04NET RRM (DRY):- Providing and laying Hand packed wall with clean hard selected stone including centering, aligning and slopes curves etc. complete as per EngineeIn-Charge.110.714cum
9610.05H.P.S. Filling :- Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete.76.6cum
9711DRAINAGE WORKS : LINED DRAIN =605 m
9811.01Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.272.25cum
9911.02Providing (M-15) for plain concrete complete as per drawing and technical specification141.745cum
10011.03Plastering with cement mortar (1:4), 15 mm thick in drain as per technical specification Clauses945.01Sqm
10112DRAINAGE WORKS : UNLINED DRAIN =8095 m
10212.01Construction of unlined surface drain of average cross-sectional area 0.4 sqm in ordinary rock to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307. Excavated material to be used in embankment at site.8095m
10313ROAD FURNITURE WORKS
10413.01Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. Logo Board at starting point (As per fig. 107 of Road signature under PMGSY published by the NRRDA on Dec'06)1nos.
10513.02Logo Board of PMGSY Project (Every 2 Km interval)(As per fig.5 of Road signage under PMGSY published by the NRRDA on Dec'06)4nos.
10613.03Maintanance Board1nos.
10713.04Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm s1nos.
10813.05Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade 5th Kilometre stone with local stone of standard design as per IRC : 8 fixingin position including painting and printing etc. as per drawing and technical specification1nos.
10913.06Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specifacation9nos.
11013.07Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification35nos.
11114ROAD SAFETY AND TRAFFIC SIGN WORKS
11214.01Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm 600 mm Equilaterial Triangle94nos.
11314.02Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm 600 mm Circular32nos.
11414.03Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm 600 mm Square4nos.
11514.04Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back.\n(Ref. Annexure 18.1)4nos.
11614.05Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.580Sqm
11715Providing Intersection Improvement= 2 nos.
11815.01Construction of granular sub-base by providing well graded Material grading 2, spreading in uniform layers as per Technical Specification clause 401&Table No. 401 of Specification of Rural Roads9cum
11915.02Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification, WBM grading II as per Technical Specification clause 405 of Specification of Rural Roads including lighting, guarding, barricading etc.2.25cum
12015.03Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification, WBM grading III as per Technical Specification clause 405 of Specification of Rural Roads including lighting, guarding, barricading etc.2.25cum
12115.04Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular Base and Bituminous including clearing as per technical specification Clause 502 of specification of rural roads including lighting, guarding, barricading etc.60sqm
12215.05Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.60sqm
12315.06Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.60sqm
12415.07Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 51060sqm
12516Maintenance
12616.01Ist Year8.7per Km
12716.02IInd Year8.7per Km
12816.03IIIrd Year8.7per Km
12916.04IVth Year8.7per Km
13016.05Vth Year8.7per Km
13116.06VIth Year Renewal Plan8.7per Km

AI Tender Summary

OUR REF NO 22351053
AUTHORITY Government Departments
TENDER VALUE 5.08 Crore
LAST DATE 15-11-2019
Authority
Authority Name State Rural Roads Development
Work Description Construction I / C Metalling And Blacktopping Of A Road From 38Th Km Of Mawphlang Balat Road To Ryngku ( 8 . 70 Km ) ( Mg / 02 / 05 / 02 ) Upgradation Construction I / C Mbt
Basic Detail
Tender No MG0205/02
Bidding Type Tender
Location
City Mawphlang
State Meghalaya
Key Dates
Publish Date 04 Nov 2019
Submission Date 15 Nov 2019
Open Date 18 Nov 2019
Finance
Tender Value 5.08 Crore
Tender Fee 6000
EMD 10.16 Lakhs
Exemption Not Available
Document List
BOQ_149107.xls
BF5A2F72-BDAA-454B-91AE-0A550871E96E.html
BidSubmission.pdf
Unbalance.pdf
Tendernotice_1.pdf
SBD.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 15, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 18, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_149107.xls

html

BF5A2F72-BDAA-454B-91AE-0A550871E96E.html

pdf

BidSubmission.pdf

pdf

Unbalance.pdf

pdf

Tendernotice_1.pdf

pdf

SBD.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders