Tender For 3Rd Dry Docking / Repairs Of Tug Tarini Of Paradip Port Trust At Paradip.
Tender Value
1.19 Crore
Estimated cost
Bid Submission
26 Nov 2019
0 days left
EMD
2.38 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paradip → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 3rd Dry Docking / Repairs of Tug Tarini of Paradip Port Trust at Paradip.
BOQ
| NATURE OF WORK :3rd Dry Docking / Repairs of Tug Tarini of Paradip Port Trust at Paradip. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | General Services & Docking (DECK SIDE DEFECT) | |||
| 2 | 2 | To quote for duration of stay at Dry Dock to complete all the works related to dry dock as per defect list and docking survey. | 78600 | Rs. | |
| 3 | 3 | To quote for duration of stay at Lay up Berth to complete the dry docking repairs in all respect as per defect list. | 395 | Rs. | |
| 4 | 4 | Ship’s hull under water portion, bilge keel to be scrapped of marine growth and to be grit blasted the entire under water portion and make completely rust free after taking all precautions for inspection of IRS Surveyor. | 450 | Sq.M | |
| 5 | 5 | To paint under water area with 6 coats of epoxy paint by airless spray (2 coat Primer + 2 coats Sealer + 2 coats Anti-Fouling), Paint PPT supply. | 450 | Sq.M | |
| 6 | 6 | The hull portion above water level to be thoroughly grit blasted to make completely rust free and free of all foreign / loose materials after taking all precautions. | 100 | Sq.M | |
| 7 | 7 | The above water level area to be painted with 4 coats of Epoxy paint by airless spray (2 coats Primer + 2 coats of finish paint), Paint PPT supply. | 100 | Sq.M | |
| 8 | 8 | Draft marks , L.L. marks and ‘Tugs’ name to be painted with enamel white paint, Paint PPT supply. | 1 | No. | |
| 9 | 9 | Both Anchor and chain have to be lowered, scrapped and wire brushed grit blasted to SA 2.5. All the joining shackles (4 Nos. each side) are to be opened and overhauled. The chain to be calibrated and to submit the report for survey by IRS Surveyor. Both Anchor and chains to be painted with 2 coats of epoxy paint by airless spray. After finishing the painting work, connect the joining shackle and mark with white/red paint and seizing wire. Hoist both anchors in position and secure properly.Paint PPT supply | 1 | L.S. | |
| 10 | 10 | Both Chain Lockers to be cleaned, chipped, scrapped and painted with 4 coats of epoxy paint (2 coats Primer + 2 coats Black Epoxy). Paint PPT supply | 1 | L.S. | |
| 11 | 11 | Existing Zinc Anodes (20/10 Kgs.) in the underwater area are to be removed and fitted back with new anodes.Anode PPT supply | 65 | Nos. | |
| 12 | 12 | Storm Valves (150 NB) to be removed, overhauled and shown to the IRS Surveyor and fitted back in place. To quote including the cost of S.S. nuts, bolts and gasket. | 4 | Nos. | |
| 13 | 13 | 1 No. Fpk Ballast Tank, 04 Nos. Fresh Water Tanks, 01 No. Void Space (Forward) & 02 Nos. Cofferdams (Aft) as per the attached tank list in the tender documents are to be thoroughly cleaned, chipped and painted with 2 coats of Epoxy paints by airless spray (1 coat Primer + 1 coat finish). To remove all the manhole covers and fit back with handle , new packing , Stainless steel nuts and studs/Bolts .Paint PPT supply.To quote including cost of materials. | 1 | No. | |
| 14 | 14 | To quote for removal and fitting of bottom plugs for various tanks.Plugs are to be covered with Mseal after fitting.To quote including cost of material. | 5 | Nos. | |
| 15 | 15 | Wooden fenders are to be removed and fitted back with G.I. nuts, bolts & 3 mm thick washers after grit blasting to SA 2.5 Grade & painting of the steel plates with coats of Epoxy Paint (2 coats Primer + 2 coats finish Paint).Paint PPT supply. To quote including cost of materials. | 30 | Mtrs. | |
| 16 | 16 | Damaged wooden fenders are to be removed and replaced with properly dressed new good quality equivalent size of seasoned ‘Sal’ Wood (Breadth: 300 MM x Height : 300 MM) with new G.I. nuts, bolts & 3 mm thick washers after grit blasting to SA 2.5 Grade & painting of the steel plates with 02 coats of Epoxy Paint (1 coat Primer + 1 coat finish Paint).Paint PPT supply.To quote including cost of materials | 36 | Mtrs. | |
| 17 | 17 | Ultrasonic thickness gauging of hull /deck plating to be carried out as required by the IRS Surveyor through the class approved workshop. | 300 | Nos. | |
| 18 | 18 | The pits/cavity area are to be filled by welding and thereafter shall be finished with grinding. | 200 | Nos. | |
| 19 | 19 | Crew Accommodation blower closing and opening spindle to be freed, overhauled and tried out. Water tight rubber packing to be renewed as per sample and shown to the Master.To quote including cost of materials | 1 | No | |
| 20 | 20 | Accommodation blower trunking bellow to be renewed as per sample.To quote including cost of materials | 1 | No | |
| 21 | 21 | 02 nos. Towing Hooks (45 T Bollard Pull) along with pneumatic release system to be opened up and thoroughly overhauled with repairing/built up and machining of all the pins and bore to required clearance and with required spares as directed by Master. Satisfactory remote/local operation to be shown to the Master.To quote including cost of materials | 2 | No | |
| 22 | 22 | To renew/ replace bath room taps/cock. (3 Nos. in Crew Bath Room & 2Nos. in Galley).( Jaquar make ). To quote including cost of materials. | 5 | Nos. | |
| 23 | 23 | Wash Basin Tap ( Jaquar make ) and connection pipe along with basin drain water pipe damaged to be renewed.To quote including cost of materials. | 5 | Nos. | |
| 24 | 24 | Supply and renew latrin comode in Ch. Engineer's cabin and overhaul flushing system.To quote including cost of materials | 1 | Nos. | |
| 25 | 25 | Master’s and chief Engineer Cabin toilet door, crew toilet door & Mess Room door handle locks are to be renewed as per sample.To quote including cost of material. | 5 | Nos. | |
| 26 | 26 | Steel Plating along with frames, beams, brackets and all the required fitting shall be renewed at the following locations as per the normal practices of Ship construction/ IRS construction rules:The firm to quote including cost of steel plates and removing and fittings of any accessories attached to plate to renew the plates per ton basis. M.S. Plates of IS 2062 grade having thickness of 12MM , 10 MM, 8 MM, 6 MM are to be used.\nHull plating (Under/above water level)\nMain deck plating/frames/angles\nUnder deck bulk heads/tanks\nSea Chest\nChannels\nSkeg, Bilge Keel, Rudder.\nEngine Room floor plates, securing angles, staircase, blower trunking, machinery foundations, bas plate of light fittings, windlass/ capstan etc.\nAny other steel structure as required by PPT | 8 | MTs | |
| 27 | 27 | To quote for removal and refitting of panelling/Insulation. (Including cost of material) | 10 | Sq.Mtrs. | |
| 28 | 28 | All the oil tanks (F.O.Tanks 02 nos, F.O.D.S. Tanks 02 nos , L.O.Tanks,hydraulic tank, Dirty Oil Tank and Sludge Tank) as per the attached tank list in the tender documents are to be thoroughly cleaned, gas freed and to be shown to the IRS Surveyor. Total 08 nos. After completion of Survey work, the manhole cover to be boxed back with new joints, Stainless steel studs/Nuts/Bolts.To quote including cost of materials | 8 | Nos | |
| 29 | 29 | Polishing of wooden furniture are to be carried out with Teak Polish and sprayed with PU paint ( berger/Asian Paint).To quote including cost of materials.\n | 10 | Sq.Mtrs. | |
| 30 | 30 | Wash Basin Tap , Galley sink taps ( Jaquar make ) & hoses are to be renewed as per sample.To quote including cost of materials | 1 | Nos. | |
| 31 | 31 | Fire Hydrant Valves N.B. 65 MM are to be cleaned overhauled and tested at 5kg/sq.cm shown to Master. Valves are to be painted and fitted back in place with new joints, St.Steel bolts & nuts.To quote including cost of materials. | 5 | Nos. | |
| 32 | 32 | Fire line Relief Valve to be overhauled and relief pr. Adjusted at 10 Kg. Per Sq. CM and certificate to issue. | 1 | No | |
| 33 | 33 | Securing GI ‘U’ clamps with nuts of Pipelines to be renewed as per sample.To quote including cost of materials | 20 | Nos. | |
| 34 | 34 | Fire Hose Box to be supplied and fitted with locking arrangement 600X500X200mm : FRP | 3 | Nos. | |
| 35 | 35 | To repair and overhaul the Hand Pump of Chain Locker, Void Space & Cofferdam with renewal of worn out spares,gasket, SS nut and bolts and trial to be shown to the IRS Surveyor.To quote including cost of materials | 3 | Nos. | |
| 36 | 36 | A sample of foam chemical from the foam tank is to be laboratory tested for its potency. | 1 | Nos. | |
| 37 | 37 | To remove old rubber packing of following water tight doors etc, de-rust and clean the packing channel, paint with 2 coats of each Primer & finish paint then put the new rubber packing of the following water tight doors, hatches, port holes etc and pressure testing to be carried out and shown to the Surveyor. to quote including cost of material.PaintPPT supply. | |||
| 38 | 37.01 | Water Tight Doors | 4 | Nos. | |
| 39 | 37.02 | Emergency Booby Hatch Cover | 3 | Nos. | |
| 40 | 37.03 | Rope Store Booby Hatch Cover | 1 | No. | |
| 41 | 37.04 | Engine Room Blower Cover | 2 | Nos. | |
| 42 | 37.05 | Crew Accommodation Blower Cover | 2 | Nos. | |
| 43 | 37.06 | Exhaust Blower Cover | 7 | Nos. | |
| 44 | 37.07 | Circular Porthole, Dia : 300 MM to be removed and repaired with new rubber gasket, to quote including cost of material. | 20 | Nos. | |
| 45 | 37.08 | Porthole Deadlight Cover | 30 | Nos. | |
| 46 | 38 | Air Vent Pipe head to removed and non return Valve to overhaul for all the tanks and satisfactory operation of valve to be shown to Master. New flame arrester SS wire mesh to be fitted.To quote including cost of material. | 19 | Nos. | |
| 47 | 39 | To supply and install a new Motorola VHF (Model No: GM-338) along with all the accessories in the Wheel House.and new antenna and cable acessories.To quote including cost of materials | 1 | No. | |
| 48 | 40 | Wheel House, Master’s Cabin, Engineer’s Cabin, Crew Accommodation, Crew Mess, Officer’s Mess, Galley& Alleyway Linoleum flooring mats are to be renewed with 3 MM thickness Linoleum flooring mats.To quote including cost of materials | 60 | Sq. Mtrs. | |
| 49 | 41 | To supply and fit old Pay Loader tyres at stern along with holding plates ( 12mm thick), Nuts/Bolts, Shackle & Chains as per sample.To quote including cost of materials | 10 | Nos. | |
| 50 | 42 | To supply and fit old Truck tyres fenders and to be fitted with holding plates( 10mm thick ), Nuts/Bolts, Shackle & Chains as per sample.To quote including cost of materials | 40 | Nos. | |
| 51 | 43 | Main Deck Bollards to be fabricated and fitted in place. Height : 550 MM, Dia : 300 MM, Mat: SH 80 Pipe, with 16 mm thick plate, bollard are to be filled with concrete.To quote including cost of material. | 4 | Pairs | |
| 52 | 44 | Main cabin door godrej locking system with key to be renewed with new Godrej locks.To quote including cost of material. | 3 | Nos. | |
| 53 | 45 | To supply following Paints from OEM or its Authorised Dealers of Akzonoble Paints (International Brand) or Jotun or Sigma marine or hampel and Stores & Spares at the time of dry docking / repairs:- | |||
| 54 | 45.01 | Epoxy Primer Intergard 269 or its equivalent Jotun /Sigma marine or hampel. | 600 | Ltrs. | |
| 55 | 45.02 | Epoxy Sealer Intertuf 262 or its equivalent Jotun / Sigma marine or hampel. | 300 | Ltrs. | |
| 56 | 45.03 | Epoxy Sealer Intergard 263 or its equivalent Jotun / Sigma marine or hampel. | 300 | Ltrs. | |
| 57 | 45.04 | Epoxy Anti Fouling Interspeed 6200 or its equivalent Jotun / Sigma marine or hampel. | 180 | Ltrs. | |
| 58 | 45.05 | Epoxy Fresh Water paint Interline White (TLA 850) or its equivalent Jotun / Sigma marine or hampel. | 200 | Ltrs. | |
| 59 | 45.06 | Epoxy Fresh Water Paint Buff (TLA 852) or its equivalent Jotun / Sigma marine or hampel. | 60 | Ltrs. | |
| 60 | 45.07 | Epoxy Black (Finish) Intergard 740 or its equivalent Jotun / Sigma marine or hampel. | 120 | Ltrs. | |
| 61 | 45.08 | Top coat- 740-(Deck Green) or Equivalent paint from Jotun or Sigma marine or hampel for Eng. room . | 100 | Ltrs. | |
| 62 | 45.09 | Epoxy Green Intergard KDL 549 or its equivalent Jotun / Sigma marine or hampel. | 140 | Ltrs. | |
| 63 | 45.1 | Epoxy Thinner GTA 220 or its equivalent Jotun / Sigma marine or hampel. | 240 | Ltrs. | |
| 64 | 45.11 | Anti Fouling Thinner GTA 007 or its equivalent Jotun / Sigma marine or hampel. | 40 | Ltrs. | |
| 65 | 45.12 | International Top Coat Enamel Paint (White) or its equivalent Jotun / Sigma marine or hampel. | 100 | Ltrs. | |
| 66 | 45.13 | International Top Coat Enamel paint (Green) or its equivalent Jotun / Sigma marine or hampel. | 100 | Ltrs. | |
| 67 | 45.14 | Thinner for Enamel Paint or its equivalent Jotun / Sigma marine or hampel. | 100 | Ltrs. | |
| 68 | 46 | To supply Zinc Anodes (10 Kg. each) Sargam Make, wth test certificate | 55 | Nos. | |
| 69 | 47 | To supply Zinc Anodes (20 Kg each), Sargam Make, with test certificate | 12 | Nos. | |
| 70 | 48 | To supply Spare mini paint roller brush refill 100mm size | 60 | Nos. | |
| 71 | 49 | To supply Paint roller brush with handle 100mm size . | 40 | Nos. | |
| 72 | 50 | All the 37 Nos. key hole type rubber fenders on the Stern and both side of Bow are to be opened out, inside plate to be checked for any dent or deformation. The entire area to be thoroughly grit blasted to SA 2.5 grade and painted with 2 coats of Epoxy Primer & 2 coats Finish paint by airless spray. All the fender holding pins are to be thoroughly checked. The bent pins are to be renewed. The fenders are to be fitted back in place. In case of any damage to the fender found, same to be renewed with equivalent type rubber fender(Size: 300 MM X 300 MM x 100 MM key hole type rubber fender). Fender area length at stern and bow is 10 Sq. Mtr.To quote including cost of materials. Paint PPT supply.\n | 1 | No. | |
| 73 | 51 | All the 34 Nos. key hole rubber fenders on the Fwd are to be opened out, inside plate to be checked for any dent or deformation. The entire area to be thoroughly grit blasted and painted with 2 coats of Epoxy paint by airless spray. All the fender holding pins are to be thoroughly checked. The bent pins are to be renewed. The fenders are to be fitted back in place. In case of any damage to the fender found, same to be renewed with equivalent type rubber fender. Fender area length 6 Sq.Mtr.To quote including cost of materials. Paint PPT supply.\n | 1 | No. | |
| 74 | 52 | Both side Tug’s light Name board fitted at Monkey Island to be renewed as per sample. | 1 | No. | |
| 75 | 53 | The firm to quote for pipe renewal at different places such as Main decks, overhead sanitary lines/bilges/tanks for following sizes: and fitted back with new joints, Stainless steel nuts & bolts.To quote including cost of material. | |||
| 76 | 53.01 | Upto 25 mm bore SCH-40 Seamless Pipelines | 15 | Mtrs. | |
| 77 | 53.02 | Upto 25 mm bore SCH-80 Seamless Pipelines | 15 | Mtrs. | |
| 78 | 53.03 | From 30 mm to 50 mm bore SCH-40 Seamless Pipelines | 15 | Mtrs. | |
| 79 | 53.04 | From 30 mm to 50 mm bore SCH-80 Seamless Pipelines | 15 | Mtrs. | |
| 80 | 53.05 | From 55 mm to 75 mm bore SCH-40 Seamless Pipelines | 15 | Mtrs. | |
| 81 | 53.06 | From 55 mm to 75 mm bore SCH-80 Seamless Pipelines | 15 | Mtrs. | |
| 82 | 53.07 | From 80 m to 100 bore SCH-40 Seamless Pipelines | 15 | Mtrs. | |
| 83 | 53.08 | From 80 m to 100 bore SCH-80 Seamless Pipelines | 15 | Mtrs. | |
| 84 | 53.09 | From 105 mm to 150 mm bore SCH-40 Seamless Pipelines | 15 | Mtrs. | |
| 85 | 53.1 | From 105 mm to 150 mm bore SCH-80 Seamless Pipelines | 15 | Mtrs. | |
| 86 | 54 | wheel house both side platform railing to be renewed with 14 gauge St.Steel 316 Grade pipelines of approximate size of Pipe to be used ( 25mm dia 10 mtrs and 50mm dia 10 mtrs) .To quote including cost of materials. | 1 | LS | |
| 87 | 55 | Following valves in the fire fighting system are to be opened, cleaned, overhauled and tested at pressure 5kg/ Sq. Cm and to be fitted back with new SS nut bolts and gaskets/ Joints . To quote including cost of materials. | |||
| 88 | 55.01 | 150 MM NB | 3 | Nos. | |
| 89 | 55.02 | 150 MM NB | 1 | No. | |
| 90 | 55.03 | 080 MM NB | 1 | No. | |
| 91 | 55.04 | 040 MM NB | 2 | Nos. | |
| 92 | 56 | To fabricate and supply Aluminium gangway of 5 Mtrs. Long , 0.61 Mtrs. width having 12 steps and 16 nos. of stanchion 40mm dia & 1250 mm length with aluminium checker plates of 5 MM thick. With fibrewheel. Quote Lumpsum including cost of material. | 1 | No. | |
| 93 | 57 | To Supply 1 no. double acting Danton Emergency Hand Pump and working trial to be shown to the Master. | 1 | No. | |
| 94 | 58 | To Supply and install 02 no split AC ( 01 ton capacity of make ( hitachi/ Daikin/ O general) with new heavy gauge copper pipes at Master and Chief Engineer Cabin. Condenser shall be copper materials. To quote including cost of materials | 1 | No. | |
| 95 | 59 | Windlass gear box oil to be drained, oil sump to be cleaned properly and filled up with new gear oil ( Oil PPT supply). | 1 | No. | |
| 96 | 60 | Capstan on the aft deck to be overhauled.Quote including cost of materials. | 1 | No. | |
| 97 | 61 | 1 no. telescopic monitor and 2 nos. Jet monitors of Fire fighting system to be overhauled and refitted with new rubber packing and St. Steel Nuts & Bolts. | 3 | No. | |
| 98 | 62 | ENGINE SIDE DEFECTS | |||
| 99 | 63 | The Vessel has to be Supply with 415V AC 3 Phase 50 Hz Supply through the Vessel Shore Connection Box during the entire period of stay in Dry Dock and afloat. Alternating arrangement like Stand by Generator to be kept for Supply during Load Shedding. Initial and Final reading are to be taken in presence of Ship’s Staff. | 1 | LS | |
| 100 | 64 | MAIN ENGINES \nMake - WARTSILA NSP, Finland Type - 8L20 Power - 1600KW RPM - 1000 \nSl.No - Stbd Engine - PAAE 131610\n Port Engine - PAAE 131611 The following attachments are to be completely dismantled , cleaned, Overhauled ,calibrated and Pressure Tested wherever required at working pressure. After fitting of all the attachment Engines are to be Tried out to the full Satisfaction of Engineer-in-Charge. | |||
| 101 | 64.01 | Plate Cooler | 2 | Nos. | |
| 102 | 64.02 | L.O Cooler | 2 | Nos. | |
| 103 | 64.03 | Centrifugal Filter | 2 | Nos. | |
| 104 | 64.04 | Sea Water Pump | 2 | Nos. | |
| 105 | 64.05 | Fresh Water Pump | 2 | Nos. | |
| 106 | 64.06 | Air Cooler | 2 | Nos. | |
| 107 | 64.07 | Over Head Fresh Water Expansion Tank | 2 | Nos. | |
| 108 | 64.08 | Tappet Clearance to be checked and adjusted. | 2 | Nos | |
| 109 | 64.09 | Sump Oil to be drained out and handed over to Ship’s Staff. To open all the crank case doors, Crank Case to be thoroughly cleaned and shown to Ship’s Staff. New oil to be filled in the sump up to the normal level.(Oil Supply by PPT) | 2 | Nos | |
| 110 | 65 | PROPULSION SYSTEM\n Make - Schottel, Germany\nType - SRP-1012\nThe SRP System , Lower Gear Box, Upper Gear Box, Hydraulic System, Hydraulic Tanks, Clutches and Clutch Control Panels are to be opened up and Inspected under the Supervision of Schottel Engineer only and shown to IRS Surveyer/EIC. After Inspection and survey, all the items are to be fitted back in position. Oil to be drained out from Gear boxes and Top up Tank. Gear boxes and and tanks to be cleaned thoroughly, line filters to be renewed/ cleaned. Drained out oil to be handed over to Ship’s Staff. System to be flashed properly and to fill the Fresh oil up to the mark. ( Oil supply by PPT).The above work shall be carried out under the Instruction and supervision of authorised Schottel Engineer\n( To quote Labour charges only to assist Service Engineer) Schottle Service Engineer Charges will be directly paid by PPT.\n | 2 | Nos. | |
| 111 | 66 | PROPELLERS\nPropellers are to be de-scaled, Polished and the Non Destructive (NDT) Crack Test to be carried out at the root and Tips of Blades and result to be shown to IRS Surveyer.After NDt test propeller are to be coated with PU clear Paint ( 02 coats ) (Asian Paint). To quote including cost of materials. | 2 | Nos. | |
| 112 | 67 | FRESH WATER HYDROPHORE SYSTEM: The manhole Cover of the Tank to be opened and cleaned thoroughly from inside. To apply two coats of Fresh Water Compatible Paint and fit back the manhole cover. Fresh Water Pump to be dismantled and Over hauled with required spares. The Guage Glass and Pressure Switch to be renewed. Pressure switch to be adjusted to Start/Stop at 2.5 to 5.0 Kg/cm respectively. To quote including materials. | 1 | No | |
| 113 | 68 | SEA WATER HYDROPHORE SYSTEM The manhole Cover of the Tank to be opened and cleaned thoroughly from inside. To apply two coats of epoxy paint and fit back the manhole cover. Sea Water Pump to be dismantled and Over hauled with required spares. The Guage Glass and Pressure Switch to be renewed. Pressure switch to be adjusted to Start/Stop at 2.5 to 5.0 Kg/cm respectively. To quote including cost of materials | 1 | No | |
| 114 | 69 | The oily waters and sludges to be removed from the engine room bilges. The entire Engine Room Bilges including angles , frames, girders etc are to be scrapped,derusted and cleaned properly to make it oil free. To apply 2 coats of epoxy paint. . ( Paint PPT Supply) | 300 | Sq.Mtrs. | |
| 115 | 70 | 5 nos of Sea Water line Stainers ` along with their housing are to be removed, Cleaned, de-rusted, Painted ant fitted back in place with new joints, nut and bolts (SS) Paint to be supplied by PPTTo quote Lumpsum including materials | 5 | Nos. | |
| 116 | 71 | All the Engine Room Checker Plates are to be removed, cleaned by Sand Blasting to SA 2.5 and painted with two coat of Primer paint and one coat of Green Paint from both the sides and then properly secured with counter shank St.Steel Screws and angles.( Paint supply by PPT).Quote Labour cost only | 100 | Sq.Mtrs. | |
| 117 | 72 | The following Pumps are to be removed, dismantled, cleaned, overhauled and shown to IRS Surveyer and then re-assembled with new Joints painted and then fitted back in place with new nut and bolts ( SS). Grease nipples and Beraring and Pressure gauges are to be renewed.Quote Lumpsum including materials | |||
| 118 | 72.01 | a) GS PUMP Make - BE Pump Model - A7 130-KK-TE-3\nCapacity - 30 M3/Hr.\nRPM - 1450 HP/Kw - 15/11\n | 1 | No | |
| 119 | 72.02 | b) BILGE PUMP Make - BE Pump\nModel - A7 120-KK-TE-3\nCapacity - 30 M3/Hr.\nRPM - 1450 HP/Kw - 15/11\n | 1 | No. | |
| 120 | 73 | Compressed AIR BOTTLE :Capacity 250 Ltrs. The Inspection Covers are to be opened, Cleaned from inside & shown to IRS Surveyer and then fitted back the Inspection Cover. The Air Bottle safety valve to be Pressure Tested at 10% more than the working Pressure & Certificate of Pressure testing to be given. All the Valves are to be overhauled with renewal of Valve Seats . To quote including cost of materials. | 2 | Nos | |
| 121 | 74 | Compressed AIR BOTTLE Capacity 125 Ltrs. The Inspection Cover are to be opened, Cleaned from inside & shown to IRS Surveyer and then fitted back the Inspection Cover. The Air Bottle safety valve to be Pressure Tested at 10% more than the working Pressure & Certificate of Pressure testing to be given. All the Valves are to be overhauled with renewal of Valve seats is to be renewed. | 1 | No | |
| 122 | 75 | SEA CHEST Sea Chest including Sea Chest Filters and Housing are to be removed , Cleaned thoroughly and painted with 3 coats of epoxy paints and fitted back. Gratings are to be cleaned painted and fitted in place with proper Lockings (St.Steel 316 Grade Wire) and then to be presented to IRS Surveyer.Paint supply PPT | 3 | Nos | |
| 123 | 76 | The following Sea Chest & Over Board Sea line Valves are to be removed, Cleaned, Overhauled and Pressure Tested at 5 Kg/sq.cm and shown to IRS Surveyer. Then Valves are to be painted with 2 coats of paint and fitted back in place with new Joints, St. Steel nut and Bolts. Paint PPT supply.To quote lumpsum including cost of materials | |||
| 124 | 76.01 | Sea chest valve 250 NB | 3 | Nos. | |
| 125 | 76.02 | Butterfly valve-NB250mm. | 3 | Nos. | |
| 126 | 76.03 | Butterfly valve-NB200mm. | 4 | Nos. | |
| 127 | 76.04 | Butterfly valve-NB100mm. | 2 | Nos. | |
| 128 | 76.05 | Overboard valves NB 150 mm | 2 | Nos. | |
| 129 | 76.06 | Overboard valves NB 100 mm | 4 | Nos. | |
| 130 | 76.07 | Overboard valves NB 65 mm | 2 | Nos. | |
| 131 | 76.08 | Overboard valves NB 50 mm | 4 | Nos. | |
| 132 | 76.09 | Overboard valves NB 25mm | 2 | Nos. | |
| 133 | 77 | The following Intermediate Sea Water line Valves are to be removed, Cleaned, Overhauled and Pressure Tested at 5 Kg/sq.cm and shown to EIC. Then Valves are to be painted with 2 coats ofpaint and fitted back in place with new Joints, St. Steel nut and Bolts. Paint PPT supply. To quote Lumpsum including cost of materials | |||
| 134 | 77.01 | 125 NB | 6 | Nos. | |
| 135 | 77.02 | 100NB | 20 | Nos. | |
| 136 | 77.03 | 80 NB | 30 | Nos. | |
| 137 | 77.04 | 65 NB | 30 | Nos. | |
| 138 | 77.05 | 40 NB | 20 | Nos. | |
| 139 | 77.06 | 32 NB | 20 | Nos. | |
| 140 | 77.07 | 25 NB | 15 | Nos. | |
| 141 | 78 | STEP UP GEAR BOX Make - Kumera AS, Norway Type - Norgear 2FGC - 2265 Sl.No - N94810 The System is not working from remote ( Wheel House). The fault to be traced and rectify and to make the Gear Box operational from both the stations. Pressure Switches and solenoid Valves are to be renewed.To quote lumpsum including materials\n\n\n | 1 | No | |
| 142 | 79 | The Following Sea Water pipe lines are to be removed , Cleaned and Pressure tested at 05 Bar Pressure and Shown to EIC. The Pipe lines are to be painted with 2 coats of Paint and fitted back in place with new joints, St.steel nuts and bolts. To quote including materials. | |||
| 143 | 79.01 | 150 NB | 10 | Mtrs | |
| 144 | 79.02 | 125 NB | 10 | Mtrs | |
| 145 | 79.03 | 100 NB | 20 | Mtrs | |
| 146 | 79.04 | 80 NB | 20 | Mtrs | |
| 147 | 79.05 | 65 NB | 20 | Mtrs | |
| 148 | 79.06 | 50 NB | 15 | Mtrs | |
| 149 | 79.07 | 32 NB | 10 | Mtrs | |
| 150 | 79.08 | 25 NB | 10 | Mtrs | |
| 151 | 80 | The Following Sea Water pipe lines are to be renewed and painted with 2 coats of Paint and fitted back in place with new joints, St.steel nuts and bolts. old pipes are to be handed over to Ship’s Staff) To quote including materials. | |||
| 152 | 80.01 | 150 NB | 10 | Mtrs | |
| 153 | 80.02 | 125 NB | 10 | Mtrs | |
| 154 | 80.03 | 100 NB | 25 | Mtrs | |
| 155 | 80.04 | 80 NB | 25 | Mtrs | |
| 156 | 80.05 | 65 NB | 25 | Mtrs | |
| 157 | 80.06 | 50 NB | 50 | Mtrs | |
| 158 | 80.07 | 32 NB | 14 | Mtrs | |
| 159 | 80.08 | 25 NB | 30 | Mtrs | |
| 160 | 81 | To Supply and Fit Shell and Tube Type Heat Exchanger in DG Sets as per Sample. Material of body and cover tube material also Brass.Size - Cross Section 9”X 8” , Length – 24”. To quote including cost of materials | 3 | Nos. | |
| 161 | 82 | To Supply Paint Spraying Gun ( Pilot Make ) small type 01 Ltrs capacity | 2 | Nos. | |
| 162 | 83 | Table Vice with 06 inch width and 08 inch opening to be supplied and fitted Engine Room. | 1 | No | |
| 163 | 84 | Sea chest filters are to be fabricated & supplied to tug as per sample.\" Approximate Size: | |||
| 164 | 85 | Material SS, Hole size: 06mm Height 93cm Dia 34cm,thickness of plate 04 mm | 1 | No | |
| 165 | 86 | Material SS, Hole size 06mm Height 79cm Dia 34cm, thickness of plate 04 mm\n(316 SS material to be used) | 1 | No | |
| 166 | 87 | Electrical Defects | |||
| 167 | 88 | The Main Switch Board to be thoroughly cleaned and checked for satisfactory operation.All the cables of Main Switch Board, BDs (24 DC, 230V AC and 415V AC ), Group Starters, Windlass Control Panel, Capstan Control Panel, Shore Supply Control Box Etc are to be Megger Tested and Recorded and Insulation to be improved to 1.5 Mega ohm. Report to be handed over to Ship Staff. To quote lumpsum including cost of materials \n | 1 | Nos. | |
| 168 | 89 | To supply and fit Main Breakers of Main Switch Board with Remote Electrical Operating System (as per sample ) Make - Schneider Type - NSX250, F $P 440V, 4 Poles Rated - 250 A ( as per Sample to be supplied)\n\n\n | 3 | Nos. | |
| 169 | 90 | To supply and fit 1.5 Ton Split Air conditioner in MCR in Engine Room with heavy gauge copper tube Make (Hitachi/O general/Daiken)To quote Lumpsum including copper tube material & Fitting Charges) | 1 | No | |
| 170 | 91 | To Supply and Fit Wall Mounted Fan Make - Havels / Cinni/ Bajaj Dia - 12 Inches Dia - 16 Inches | 6 | Nos | |
| 171 | 92 | To Supply following Types of Pump Sets Johnson Pump ( as per sample ) Model - KGE 11-3 Body Material - Bronze Impeller - Bronze | 3 | Nos | |
| 172 | 93 | b) Make -Kirloskr /KSB or equivalent Pump (as per sample) Capacity - 3 M3/Hr. Speed - 1450 Body Material - Brass | 3 | Nos | |
| 173 | 94 | To Supply Shore Supply (ISI marked) Flexible Cable (as per sample) Size - 30 Sq mm 4 Cores, 3 Phase, 63 Amps, 4 poles\n | 100 | Mtrs | |
| 174 | 95 | To Supply Poly carbonate ( Havells/ Schneider/ ) Shore Supply Plug and Socket 440V , 3 Phase, 63 Amps , 4 Poles. | 6 | Nos | |
| 175 | 96 | The following Alternators are to be removed dismantled, cleaned with CTC, varnished and Insulation to be improved to 50 Mega Ohms, boxed back with renewal of Bearings and fitted in place. To quote including materials (Make: FAG / SKF/NSK) with Invoice Copy | |||
| 176 | 96.01 | a. Alternator 60 KW | 2 | Nos. | |
| 177 | 96.02 | b. Alternator 80 KW | 1 | No | |
| 178 | 97 | The following Motors are to be removed, dismantled, cleaned, varnished and insulation to be improved to 50 Mega ohms and boxed back with renewal of bearings Make (Fag/Nsk/SKF) with invoice and fitted back in place after painting. To quote including materials | |||
| 179 | 97.01 | Bilge Pump Motor 11 KW | 1 | No | |
| 180 | 97.02 | AHU Motor 5.5 KW | 1 | No | |
| 181 | 97.03 | G. S Pump Motor 11 KW | 2 | Nos | |
| 182 | 97.04 | Derick Motor 5 HP | 1 | No | |
| 183 | 97.05 | Domestic Water Pump Motor 1 HP | 2 | Nos | |
| 184 | 97.06 | Windlass Motor 7.5 HP | 1 | No | |
| 185 | 97.07 | Capstan Motor 7.5 HP | 1 | No | |
| 186 | 97.08 | Engine Room Blower Motor 7.5 HP | 2 | No | |
| 187 | 97.09 | MCR A/C Motor 1HP | 1 | No | |
| 188 | 97.1 | Galley Exhaust and Blower Motor 1 HP | 2 | Nos | |
| 189 | 97.11 | Crew Mess Exhaust Motor 1HP | 1 | No | |
| 190 | 98 | All Navigational Light’s Supply Cable’s socket and plugs to be renewed.\n | 1 | LS | |
| 191 | 99 | To supply and fit Hot Plates in galley ( 3 KiloWatts as per sample. | 2 | Nos | |
| 192 | 100 | To supply and fit LED type Flood Light fitting in upper deck . IP66 grade Make - HALONIX /Philips/havells/osram Input Supply - 230V AC Wattage - 200 Watts Beam angle - 90 degree | 2 | Nos | |
| 193 | 101 | To supply and fit LED type floodloght Light fitting in Engine Room. IP66 grade Make - HALONIX/Philips/havells/osram Input Supply - 230V AC Wattage - 100 Watts | 4 | Nos | |
| 194 | 102 | To supply and fit 24 volt 20 amps Battery Charger for DGs (Make: Elak, TVS Lucas, Bosch) | 1 | No | |
| 195 | 103 | To repair the defective Control panel for 5 KW Main battery charger for emergency battery supply . Quote Including cost of materials. | 1 | LS | |
| 196 | 104 | To Supply and Install meter AVF-19 N (With volts, current & frequency) Make Multispan, Range: 50-500V Current: 5-500 A AC Frequency: 0-60Hz | 2 | Nos | |
| 197 | 105 | To repair the defective Alarm monitoring panel for Main engines Type: MEACOS 3000, Sl. No. 1852/01/19158, Make: Marine Electricals (I) Pvt Ltd, Mumbai-400093 Year of Mfg: 2010. Quote Including cost of materials. | 1 | Nos | |
| 198 | 106 | To Supply and install 01 no split AC ( 02 tons capacity of make ( hitachi/ Daikin/ O general) with new heavy gauge copper pipes at Wheel house. To quote including cost of materials | 1 | No | |
| 199 | 107 | Note:1) The firm shall quote the prices including all taxes, transportation and other expenses towards execution of above works except GST. The GST shall be paid at the prevailing rate. 2) The firm shall quote prices for supply items limited to MRP. The firm shall submit the bill for the supply items from the OEM or its authorised dealers . 3) For BoQ Sl.No.1&2, firm should quote only no. of days. The total cost is directly paid by the PPT. |
AI Tender Summary
Tender Timeline
Nov 02, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 27, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender