| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 2 / 187\nSpecification No : Bd.A.1\nSpec. Page No : 259\n | BI01010001010000000000000515BI0100001112 | 30.81 | Cubic Metre |
|---|
| 2 | 2 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 217\nSpecification No : Bd.E.1\nSpec. Page No : 287-288\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001113 | 18.97 | Cubic Metre |
|---|
| 3 | 3 | Providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks of 60 milimetre thickness of having a strength of 400 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and\r\ncleaning etc. complete. (using 100 per cent crushed sand), excetra complete.\nItem / Page No : 53 / 273\nSpecification No : Bd.M-12\nSpec. Page No : 385\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001114 | 885.85 | Square Metre |
|---|
| 4 | 4 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge\nItem / Page No : 36 / 76\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001115 | 1 | Number |
|---|
| 5 | 5 | Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 4 / 217\nSpecification No : Bd.E.2, B-7\nSpec. Page No : 288, 38-40\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001116 | 1.7 | Cubic Metre |
|---|
| 6 | 6.01 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement\n1 Test per 50.00 Metric Ton | BI01010001010000000000000515BI0100001117 | 1 | Number |
|---|
| 7 | 6.02 | Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Sand\n1 Test per Source | BI01010001010000000000000515BI0100001118 | 1 | Number |
|---|
| 8 | 6.03 | Compressive Strength of Cement Concrete Cube\n1 Test for quantity upto 5 cubic metre, 2 Tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 Tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 Tests for quantity above 30 cubic metre and upto 50 cubic metre. For quantity 50 cubic metre and above - 4 Tests + 1 Test for each additional 50 cubic metre | BI01010001010000000000000515BI0100001119 | 1 | Number |
|---|
| 9 | 6.04 | Sieve Analysis Test for Metal below 40 milimetre\n1 Test per 100.00 Cubic Metre | BI01010001010000000000000515BI0100001120 | 1 | Number |
|---|
| 10 | 6.05 | Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre\n1 Test per Source | BI01010001010000000000000515BI0100001121 | 1 | Number |
|---|
| 11 | 6.06 | Compressive Strength, Water Absorption, Flexural Test, Resitance to wear Test for Paving Blocks - 60 milimetre thick, 400 Kilogram per Square Centimetre Strength\n1 Test per Square Metre | BI01010001010000000000000515BI0100001122 | 1 | Number |
|---|
| 12 | 7 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. | BI01010001010000000000000515BI0100001123 | 8.92 | Cubic Metre |
|---|
| 13 | 8 | Contribution towards District Mineral Foundation at the rate of 10 percent of prevailing rate of Royalty for various building construction bonafied materials which are used for government bonafied works and for which Royalty is to be paid by the contractor.\nItem / Page No : 10 / 0\nAdditional Specifications : Government of Maharashtra, Industries, Energy and Labour Department Government Resolution Number MDF/0615/CR-34/IND-9 Dated 1-9-2016 and Section 2 thereof. | BI01010001010000000000000515BI0100001124 | 8.92 | Cubic Metre |
|---|
