| 1 | 1 | Excavation for road way in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out of rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the lines, grades, width, cutting and trimming of side slopes and levels shown as per the drawings and as directed by the Engineer-in Charge at site, according to the MORD Technical Specification section 300 and 1600 and sorting out and stacking of useful materials and stacking the same within in all leads and lifts in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means alongwith its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means/labour if required. All useful materials such as stones, single aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 56.21 cubic meter quantity @ Rs. 300/- only (Rupees at the rate of three hundred only) per cubic meter shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate is including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government. | | 421.56 | Per Cubic metre |
|---|
| 2 | 2 | Earth work in excavation for all type of road structure such as Retaining wall, Breast wall, culvert Drains and Parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) as per drawings and M.OR.D. Technical specification clause 305 and 1603 and as per direction and entire satisfaction of Engineer-in-Charge, including setting out construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of un-useful material up to any leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetres) compacted thickness including shoring strutting and pumping and bailing out water (surface and sub soil water) up to any depth any quantum of water including cleaning of slush which may arise out during dewatering as per direction and entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government. | | 944.87 | Per Cubic metre |
|---|
| 3 | 3 | Back filling behind abutment Retaining wall/Breast wall, Wing walls and the like with approved granular materials complete as per drawings and MORD technical specification clause 1203 & 1604 and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 18 | Per Cubic metre |
|---|
| 4 | 4 | Construction of Granular sub base by providing well graded material spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (Eighty-Hundred) kN static roller to achieve the desired density, complete as per MORD technical specification clause 401 for grading-I material and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 327.98 | Per Cubic metre |
|---|
| 5 | 5 | Providing laying, spreading by mechanically means and compacting to 75mm (seventy five millimetre) compacted thickness, broken/crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimetre to forty five millimetre) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled vibratory roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying brooming and supplying stone screening such as moorum or gravel for Grading-II at the rate of 0.20 (zero point two zero) cubic metre per 10 Sqm. (ten square metre) and binding material at the rate of 0.06 cubic metre per ten square metre of road surface to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification clause 405 and as per direction and satisfaction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 196.97 | Per Cubic metre |
|---|
| 6 | 6 | Providing laying, spreading by mechanically means and compacting to 75mm (seventy five millimetre) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimetre) size to water bound macadam specification including spreading and in uniform thickness, using template, hand packing motor grader, rolling with three wheeled vibratory roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying brooming and supplying of stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square meter of road surface to fill up the interstices of coarse aggregate, watering and compacting to the required density for grading-III as per MORD Technical specification clause 405 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 185.78 | Per Cubic metre |
|---|
| 7 | 7 | Providing and applying primer coat with bitumen emulsion (SS-I) with Nano technology on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogramme) per square meter of road surface using one part of Bitumen emulsion SS-I and two part of water mixed with Nano tera prime emulsion @1% of weight of emulsion mechanical means as per MORD Technical specification clause 502 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates is including Royality, Malkhana, Octroi, toll tax, sales tax,GST or any other taxes imposed by the Government. | | 2474.72 | Per Square metre |
|---|
| 8 | 8 | Providing and applying Tack coat with Bitumen emulsion (RS-1) and Nano technology on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.275Kg per Sqm (Zero point two seven five kilogram) per square metre using mechanical means using one part of Bitumen emulsion SS-I and two part of water mixed with Nano tera prime emulsion @1.4% of weight of emulsion complete as per MORD Technical specification clause 503, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,sale tax, GST or any other taxes imposed by the Government. | | 2474.72 | Per Square metre |
|---|
| 9 | 9 | Providing and applying tack coat with Bitumen emulsion (RS-1) and Nano technology using emulsion distributor at the rate of 0.225Kg per Sqm (Zero point two two five kilogram) per square metre on the prepared bituminous surface cleaned with Hydraulic broom using one part of Bitumen emulsion RS-I and two part of water mixed with 1.4% Nano tack emulsion of weight of emulsion complete as per MORD Technical specification clause 503, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax,sale tax, GST or any other taxes imposed by the Government. | | 4308.23 | Per Square metre |
|---|
| 10 | 10 | Providing, laying and rolling of open graded premix carpet of 20mm (twenty millimetre) thickness, composed of Type-B 13.2mm to 5.6mm (thirteen point two millimetre to five point two six millimetre) aggregates at the rate of 0.27 cum (zero point two seven cubic metre) premixed with bitumen emulsion Bitchem (cold mix binder) at the rate of 21.50 kgs (twenty one point five zero kilogram) per 10 (ten) square metre of road surface,laid to the required line, grade and level to serve as wearing coarse on a previously prepared base including mixing in concrete mixter and rolling with three wheeled 80-100 (eighty to hundred) kN capacity static roller finished to required level and grades complete as per MORD Technical specification clause 506 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 6781.44 | Per Square metre |
|---|
| 11 | 11 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross falls using Type-B as per MORD technical specification clause 508 using bitumen emulsion with Bitchem (cold mix binder) at the rate of 10.00kg (Ten point zero kilogram) premixed with 0.06 (zero point zero six) cubic metre of fine aggregate per 10 Sqm. (Ten square metre) of road surface heated in concrete mixer and laying of mixed material and rolling with power road roller 80-100 (eighty to hundred) kN capacity static roller, as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 6781.44 | Per Square metre |
|---|
| 12 | 12 | Scarifying the existing bituminous road surface by mechanical means upto 150mm (One hundred fifty millimetre) depth and disposal of scarified material within all leads and lifts as per MORD specification clause 301.4 complete in all respect and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 631 | Per Square metre |
|---|
| 13 | 13 | Construction of Un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement , thickness as per design, over a prepared sub base, with 43 (Forty three) grade cement or any other type as per clause 1501 using M-30 (Thirty) Grade, (designed mix) concrete coarse and fine aggregates conforming to IS : 383, maximum size of coarse aggregate not exceeding 25mm, (Twenty five millimeters) mixed in a concrete mixer of not less than 0.2 (Zero point two) cubic meter capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel) laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant dowel bars, near approaches to bridge /culvert and construction joints, admixtures as approved ,curing of concrete slabs for 14 (Fourteen) days using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD technical specification clause 1501 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 136.35 | Per Cubic metre |
|---|
| 14 | 14 | Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto any lead as per MORD technical specification Clause 1903 and as per the direction and the entire satisfactions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 2500 | Per Square metre |
|---|
| 15 | 15 | Providing and laying of hot applied thermoplastic compound 2.5mm (two point five millimetre) thick including reflectorising glass beads @ 250gms per sqm (two hundred fifty gramms per square metre) area, thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free streaks and holes complete and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 400 | Per Square metre |
|---|
| 16 | 16 | Providing and laying 100mm (One Hundred millimeter) dia PVC pipe Weep Holes in brick masonry/plain /reinforced concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of IV:20H ( One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification clause 709 and 1206.6 and as per the directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 36 | Each |
|---|
| 17 | 17 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-10 (M-Ten) nominal mix 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size), in or under water in open foundation for all type of structure, in Drain and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying under water for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days and as per drawing and MORD Technical specification section 800, 900 & 1200 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 104.8 | Per Cubic metre |
|---|
| 18 | 18 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-15 (M-Fifteen) Design mix having cement contants not less than 275 Kg/cubic metre (two hundred seventy five Kilogram) per cubic metre and graded crushed stone aggregate (40mm) forty millimetre nominal size) in or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water, for all heights/depths and any quantum of water, in Abutments and toe walls head wall and parapets etcetera including cost of form work and curing complete as per MORD technical specification section 800,900 & 1200 as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 179.24 | Per Cubic metre |
|---|
| 19 | 19 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-15 (M-Fifteen) Nominal mix 1:2½:5 (one cement isto two and half sand isto five graded crushed stone aggregate 40mm (forty millimeter) nominal size) in bedding etcetre in or under water, including pumping or bailing out water removal of the slush as required at site which may arrise at the time of laying under water complete as per MORD technical specification section 800, 900 &1200 including curring grating and carriage of material and other incidentals. as per entire satisfaction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 1.11 | Per Cubic metre |
|---|
| 20 | 20 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-15 (M-Fifteen) Nominal mix 1:2½:5 (one cement isto two and half sand isto five graded crushed stone aggregate 40mm (forty millimeter) nominal size) in or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water, for all heights/depths and any quantum of water, for founation and plinth and concrete cradle bedding Type-A under pipe and the like, etcetera including cost of form work and curing complete as per MORD technical specification section 800,900 &1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials up to all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 0.45 | Per Cubic metre |
|---|
| 21 | 21 | Earth filling (for marshy soil) in foundation, trenches and the like for Earth cushion over Hume pipe culverts etcetera with Earth obtained from approved quarry approved by Engineer-in-Charge including thoroughly watering ramming/ compacting with suitable equipment, in layers not exceeding 150mm (One Hundred fifty millimetre) in thickness complete as per MORD technical specification as per clause 305.3.9 complete and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 4.15 | Per Cubic metre |
|---|
| 22 | 22 | Providing and laying (to level or slope) 900mm dia (Nine hundred millimeter) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding or granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications clause 1101 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 5 | Per Running metre |
|---|
| 23 | 23 | Providing and laying of boulder apron Gobion wall laid in wire crates with 4mm (four millimeter) dia GI wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 (Ten) per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg (Forty kilogramme) each as per drawing and MORD technical specifications Clause 1301 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of material up to all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 324 | Per Cubic metre |
|---|
| 24 | 24 | Providing and fixing of typical PMGSY informatory sign board with logo as per MORD Technical specification and drawings, The MS plates of 1.6 mm (one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mm x 5mm (twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimeters in to twenty five millimeters into five millimeters). The angle iron frame of lower most plate and flat iron frame of middle plate will be welded to 2 nos. (two numbers) 75mmx75mm (seventy five millimeters into seventy five millimeters) of 12 SWG (twelve standard wire gauge) sheet tube posts duly embedded in cement concrete M-15 fifteen) nominal mix 1:2.5:5 (one cement : two and half sand : five crushed stone aggregate 40mm (forty millimeter) nominal size) blocks of 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter), 600mm (six hundred millimeter) below ground level and curing complete. The top most diamond plate will be welded to middle plate by 47mmx47mm (forty seven millimeter into forty seven millimeter) of 12 SWG (twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, borders etcetera will be painted with ready mix synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tubes will be painted with primer and two coats of epoxy paint as per drawings and MORD technical specifications section 1700 and annexure 1700-1 and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 2 | Each |
|---|
| 25 | 25 | Providing and fixing ordinary Kilometer Stone (precast) made of reinforced concrete Grade M-15 (fifteen), nominal mix 1:2.5:5 (one cement isto two and half sand isto five crushed stone aggregate 40mm (forty millimetre) nominal size) and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design, drawing, sign and size arrangement of letters including painting and lettering as per IRC-8 (eight) and IRC-26 (twenty six) complete as per MORD technical specification clause 1703 and fixing at site complete as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 2 | Each |
|---|
| 26 | 26 | Providing and fixing 200 metre (Two hundred metre) Stone (precast) made of reinforced concrete Grade M-15 (fifteen), nominal mix 1:2.5:5 (one cement isto two and half sand isto five crushed stone aggregate 40mm (forty millimetre) nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design, drawing, sign and size arrangement of letters including painting and lettering as per IRC-8 (eight) and IRC-26(twenty six) complete as per MORD technical specification clause 1703 and fixing at site complete as per direction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 10 | Each |
|---|
| 27 | 27 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board (six hundred millmetre equilateral triangular board) as per IRC:67 600mm equilateral triangular board made of 1.5 mm (one point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per required shade and colour supported and welded on 47mmx47mm (Forty seven millimetre into forty seven millimetre) by 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimetre) 600mm (six hundred millimetre) below ground level as per approved drawing section 1700 and as per direction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 8 | Each |
|---|
| 28 | 28 | Providing and fixing of semi reflective place indentification informatory sign 600mm (six hundred millimetre) circular board as per IRC 67 made of and drawings MS sheet of 2mm (two millimeter) thick duly stove with white color in front and grey colour on back with red reflective border of 70mm (Seventy millimeter) width and required message, letters and figures with reflective table Engineering Grade tape of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) by 12 SWG, square tube of 3050mm (three thousand fifty millimetres) hight duty strngthnd by 25x25x5mm (Twenty five into twenty five into five millimtres) M.S flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600 (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per approved drawing and MORD technical specification section 1700 and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 6 | Each |
|---|
| 29 | 29 | Providing and fixing of place indentification retro reflectorised informatory sign board as per IRC 67 made of and encapsulated lens type reflective sheeting fixed over aluminium sheet of 2mm (two millimetre) thick with area not excceding 0.9 Sqm (Zero point nine square metre) duly stove with white color in front and grey colour on back with red reflective border of 70mm (Seventy millimetre) width and required message, letters and figures with reflective table Engineering Grade tape of required shade and colour supported and welded on 47mmx47mm (Forty seven millimetre into forty seven millimetre) by 12 SWG, square tube of 3050mm (three thousand fifty millimetres) hight duty strngthnd by 25x25x5mm (Twenty five into twenty five into five millimtres) M.S flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600 (four hundred fifty into four hundred fifty into six hundred millimetre) 600mm (six hundred millimetre) below ground level as per approved drawing section 1700 and as per direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 4 | Each |
|---|
| 30 | 30 | Providing and fixing reinforced cement concrete Guard stone on curves M-15 (M-fifteen) grade of standard design as per IRC:25 fixed in position including finishing, lettering and painting as per drawing and MORD Technical specification clause 1704 and as per direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 120 | Each |
|---|
| 31 | 31 | Painting lines, dashes, arrows, etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing Technical specification clause 1702 and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | | 4.8 | Per Square metre |
|---|
