Construction Of Kudiyetta Museum At Chembanthotty Kannur -Phase 1 B
Tender Value
45.06 Lakhs
Estimated cost
Bid Submission
14 Nov 2019
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chembanthotty → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Kudiyetta Museum At Chembanthotty Kannur -Phase 1 B
BOQ
| Name of Work:Construction of Kudiyetta Museum at Chembanthotty, Kannur Pahse 1B | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0 | Laying and Jointing PVC Pipe. Heading | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1 | PART -I - CIVIL WORKS \n(SH : 1.0 EARTHWORK) \nClearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001113 | 95 | sqm |
| 3 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within the site as directed by the Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | ||
| 4 | 2.01 | All kinds of soil | BI01010001010000000000000515BI0100001115 | 29 | cum |
| 5 | 2.02 | Ordinary rock | BI01010001010000000000000515BI0100001116 | 1 | cum |
| 6 | 3 | Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge | BI01010001010000000000000515BI0100001117 | 25 | cum |
| 7 | 4 | Disposal of surplus excavated earth / building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | BI01010001010000000000000515BI0100001118 | 5 | cum |
| 8 | 5 | (SH: - 2.0 - CONCRETE WORK)\nProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | BI01010001010000000000000515BI0100001119 | ||
| 9 | 5.01 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001120 | 12 | cum |
| 10 | 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :\n1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate\n20 mm nominal size). | BI01010001010000000000000515BI0100001121 | 2 | cum |
| 11 | 7 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001122 | 12 | sqm |
| 12 | 8 | Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment ) | BI01010001010000000000000515BI0100001123 | 85 | sqm |
| 13 | 9 | (SH: - 3.0 - R.C.C. WORK)\nProviding and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. ““(Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting).\nAll works upto plinth level | BI01010001010000000000000515BI0100001124 | 1 | cum |
| 14 | 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering , shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS :9103 to accelerate, retard setting of concrete, improve worability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting). All works above plinth level upto floor five level . | BI01010001010000000000000515BI0100001125 | 7 | cum |
| 15 | 11 | Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001126 | 1 | cum |
| 16 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-Charge at all levels.\nThermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001127 | 894 | kg |
| 17 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001128 | ||
| 18 | 13.01 | Foundations, footings, bases of columns etc. for mass concrete. | BI01010001010000000000000515BI0100001129 | 11 | sqm |
| 19 | 13.02 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001130 | 78 | sqm |
| 20 | 13.03 | Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001131 | 5 | sqm |
| 21 | 13.04 | Extra for shuttering in circular work for Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001132 | 5 | sqm |
| 22 | 13.05 | Extra for shuttering in circular work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001133 | 57 | sqm |
| 23 | 13.06 | Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001134 | 7 | sq.m |
| 24 | 14 | (SH: - 4.0 - MASONRY WORK)\nProviding and constructing laterite stone masonry with neatly dressed laterite stone of size 30x20x20cm or nearest size (average compressive strength not less than 35 kg/cm2) in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges, scaffolding, raking out of joints, curing, lead, lift etc. as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001135 | 4 | cum |
| 25 | 15 | Providing and constructing laterite stone masonry with neatly dressed laterite stone of size 30x20x20cm or nearest size (average compressive strength not less than 35 kg/cm2) in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges, scaffolding, raking out of joints, curing, lead, lift etc as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001136 | 23 | cum |
| 26 | 16 | Providing and constructing 115mm thick brick masonry in CM 1:4 (1 cement, 4 coarse sand) in partition walls, parapets, etc. with bricks of standard sizes and of approved quality (average compressive strength not less than 50 Kg/cm2) including scaffolding, raking out of joints, curing, cost and conveyance of all materials, lead, lift, etc. complete including providing 2 Nos. of 6mm dia bars as reinforcement at every third layer wherever specified (Reinforcement shall be measured and paid for under relevent item) and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001137 | 35 | sqm |
| 27 | 17 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry including cost and conveyance of MS bars etc complete as directed by Engineer-in-Charge . | BI01010001010000000000000515BI0100001138 | 35 | sqm |
| 28 | 18 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)including raking out of joints,filling the joints /hollows with suitable sizes of split stones,filling the joints clearly, curing,cost and conveyance of all materials, cost of bond stone (should be provided at every 0.5 sqm of face area) , lead, lift etc. complete as directed by Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001139 | 34 | cum |
| 29 | 19 | (SH: - 5.0 - JOINERY WORKS)\nProviding and fixing powder coated aluminium work for doors ,windows& partitions with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make confirming to IS:733 & IS:1285 fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions,at top,bottom & sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth,rust free,straight,mitred & jointed mechanically where ever required including cleat angle,aluminium snap beading for glazing/panelling,cp brass/stainless steel screws,removing the stickers clearly all complete as per architectutral drawings & directions of Engineer-in-Charge at all levels.(glazing & panelling to be paid seperately).Minimum thickness of powder coating for powder coated Aluminium shall be 50 micron | BI01010001010000000000000515BI0100001140 | ||
| 30 | 19.01 | For fixed portion | BI01010001010000000000000515BI0100001141 | 49 | kg |
| 31 | 19.02 | For shutter of doors ,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings,exhaust fan of required size,etc wherever required including the cost of PVC neoprene gasket required(fittings shall be paid for separately) | BI01010001010000000000000515BI0100001142 | 49 | kg |
| 32 | 20 | Providing and fixing 12 mm thk prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II, in panelling fixed in aluminium doors,windows shutters and partition frames with C.P. brass / stainless screws etc complete as per architectural drawings and directions of Engineer in charge at all levels.Pre laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001143 | 5 | sqm |
| 33 | 21 | Providing and fixing glazing in aluminium doors,windows,ventilator shutters,partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directon of Engineer-in-Charge at all levels | BI01010001010000000000000515BI0100001144 | ||
| 34 | 21.01 | with pin headed glass panes of 4.00mm thickness | BI01010001010000000000000515BI0100001145 | 2 | sqm |
| 35 | 21.02 | With float glass panes of 5.50 mm thickness | BI01010001010000000000000515BI0100001146 | 4 | sqm |
| 36 | 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes 5.5 mm thick glass panes | BI01010001010000000000000515BI0100001147 | 1 | sqm |
| 37 | 23 | Providing and fixing IS:3564 marked Aluminium die cast body tubular type universal hydrualic door closer of approved make with necessary accessories and screws etc complete as directed by the Engineer-in- Charge at all levels. | BI01010001010000000000000515BI0100001148 | 3 | no |
| 38 | 24 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness. | BI01010001010000000000000515BI0100001149 | 1 | no |
| 39 | 25 | Providing and fixing bright finished brass100mm mortice latch and lock ISI marked with 6 levers and a pair of anodised(anodic coating not less than grade AC 10 as per IS:1868)aluminium lever handles with necessary screws etc. complete at all levels.(best make of approved quality). | BI01010001010000000000000515BI0100001150 | 4 | no |
| 40 | 26 | Providing and fixing pivot system of approved brand and manufacture for doors including cost of cutting the floors and required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc., complete as per the direction of Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001151 | 1 | no |
| 41 | 27 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by the Engineer-in-Charge at all levels.\n100 x 10 mm | BI01010001010000000000000515BI0100001152 | 12 | no |
| 42 | 28 | Providing wood work in frames of doors, windows , clerestory windows and other frames, wrought frames and fixed in position with hold fast lugs or with dash fastners of required dia & length(hold fast lugs or dash fastener shall be paid separately)\nSecond class teak wood | BI01010001010000000000000515BI0100001153 | 0.11 | cum |
| 43 | 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs or approved dash fastners and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001154 | 12 | no |
| 44 | 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked stainless steel butt hinges(100 x 60 x 6.5mm IS : 12817 marked ) with necessary screws excludings panelling which shall be paid for separately. | BI01010001010000000000000515BI0100001155 | ||
| 45 | 30.01 | Second class teak wood- 35 mm thick shutters (Minimum Width of panel shall be 100mm) | BI01010001010000000000000515BI0100001156 | 2 | sqm |
| 46 | 31 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: | BI01010001010000000000000515BI0100001157 | ||
| 47 | 31.01 | Second class teak wood (The minimum width and thickness of a panel shall be 100 mm and 25 mm respectively) | BI01010001010000000000000515BI0100001158 | 2 | sqm |
| 48 | 32 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202(part 1)decorative typem core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | BI01010001010000000000000515BI0100001159 | ||
| 49 | 32.01 | 35mm thick including ISI marked stainless steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001160 | 3 | sqm |
| 50 | 33 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame. | BI01010001010000000000000515BI0100001161 | ||
| 51 | 34 | The rate shall include providing and fixing frames of approved colour for, providing and fixing 6/8 Nos. of anchor fastners/dash fastners of approved size as per manufactur's specification, finishing the joints to match the surroundings and finishing the frames by buffing and polishing with wax as directed. (The contractor shall supply 1 No. of frames free of cost for every 10 Nos. of frames supplied at site or part thereof for destructive testing) The rate shall includes the cost and conveyance of all materials, all labour charges, lead, lift, all taxes, sundries, etc., complete at all levels as directed by the Engineer-in-Charge. | BI01010001010000000000000515BI0100001162 | 18 | m |
| 52 | 35 | Providing and fixing to existing door frames 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant\ngrade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001163 | 6 | sqm |
| 53 | 36 | (SH: - 6.0 - STEEL WORK)\nStructural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer- in-Charge at all levels. | BI01010001010000000000000515BI0100001164 | 63 | kg |
| 54 | 37 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting,hoisting, fixing in position,and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete with electric resistance or induction butt welded tubes .including closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001165 | 4499 | kg |
| 55 | 38 | Providing and fixing M.S round holding down bolts with nuts and washer plate including two coats of approved make and colour synthetic enamel paint over two coats of approved make yellow zinc chromate primer,including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer-in-Charge | BI01010001010000000000000515BI0100001166 | 21 | kg |
| 56 | 39 | Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. | BI01010001010000000000000515BI0100001167 | ||
| 57 | 39.01 | In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. | BI01010001010000000000000515BI0100001168 | 45 | kg |
| 58 | 40 | Supplying and fixing rolling shutters of approved make,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25mm thick top cover | BI01010001010000000000000515BI0100001169 | 10 | sqm |
| 59 | 41 | Providing and fixing ball bearing for rolling shutters including cost and conveyance of all materials, labour, etc. as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001170 | 8 | no |
| 60 | 42 | (SH: - 7.0 - FLOORING WORK)\nKota stone slab flooring over 20mm(average)thick base laid over and jointed with grey cement slurry mixed with pigment to match the pigment to match the shade of the slab including rubbing and polishing complete with base of cemnt mortar 1 : 4(1 cement: 4 coarse sand): | BI01010001010000000000000515BI0100001171 | ||
| 61 | 42.01 | 25mm thick | BI01010001010000000000000515BI0100001172 | 40 | sqm |
| 62 | 43 | Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average)thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete | BI01010001010000000000000515BI0100001173 | 7 | sqm |
| 63 | 44 | Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge at all levels.(The purchase price of tiles should be taken as Rs.400/sqm and any deviation plus or minus in the purchase price in approved shade will be adjusted in the price quoted) | BI01010001010000000000000515BI0100001174 | 49 | sqm |
| 64 | 45 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(The purchase price of tiles should be taken as Rs.414/sqm and any deviation plus or minus in the purchase price in approved shade will be adjusted in the price quoted) | BI01010001010000000000000515BI0100001175 | 117 | sqm |
| 65 | 46 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite of any colour and shade for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nArea of slab over 0.50 sqm | BI01010001010000000000000515BI0100001176 | 11 | sqm |
| 66 | 47 | Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001177 | 32 | m |
| 67 | 48 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | BI01010001010000000000000515BI0100001178 | 4 | no |
| 68 | 49 | (SH: - 8.0 - CEILING & ROOFING WORKS)\nProviding and fixing 18mm thick exterior grade UPVC board as roof face board (Mughappu) of Multiwood make or equivalent , at a height of 10m, made of U Pvc polyester resin in an extruded polymer profile form with CNC cutting as per approved design and drawing.The board shall be 100% waterproof, Termite & Borer proof, corrosion free & fire retardend and used for wet area applications.The rate shall include cost and conveyance of all materials, labour, scaffolding, lead, lift etc complete at all levels as directed by the Engineer- in-Charge.\n | BI01010001010000000000000515BI0100001179 | 7 | sqm |
| 69 | 50 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash\nfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel\nwith connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, | BI01010001010000000000000515BI0100001180 | ||
| 70 | 51 | including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs\nat 450 mm centre, with 25mm long dry wall screws @ 230 mm\ninterval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant\nboard | BI01010001010000000000000515BI0100001181 | 48 | sqm |
| 71 | 52 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). | BI01010001010000000000000515BI0100001182 | 168 | sqm |
| 72 | 53 | Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). | BI01010001010000000000000515BI0100001183 | 38 | m |
| 73 | 54 | Providing and fixing 15cm wide, 30cm overall square shape UPVC rain water gutter with iron brackets 20x6mm size , bolts,nuts, washers etc., including making necessary connections with chains for rain water down take and sealing the joints with silicon sealent wherever required including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. | BI01010001010000000000000515BI0100001184 | 62 | m |
| 74 | 55 | Providing plain G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.80 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001185 | 169 | sqm |
| 75 | 56 | Providing and fixing plaster of paris moulding/cornices of section size 100x100 mm (overall dimensions) as per drawing, fixing to the ceiling/walls at all heights using approved quality adhesive. The plaster of paris shall be of approved make and the sections shall be made using coir/fibrous reinforcement. The rate shall include cost of all materials, labour charges, moulding charges, scaffolding charges, painting two coats of plastic emulsion over two coats of approved primer and two coats of putty, etc. complete as directed by Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001186 | 84 | m |
| 76 | 57 | (SH: - 9.0 - FINISHING WORK)\n6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001187 | 7 | sqm |
| 77 | 58 | 12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001188 | 243 | sqm |
| 78 | 59 | 15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001189 | 130 | sqm |
| 79 | 60 | Applying one coat of water thinnable cement primer of approved brand and manufacture on all interior surface including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete at all levels as directed by the Engineer in charge . | BI01010001010000000000000515BI0100001190 | 243 | sqm |
| 80 | 61 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : | BI01010001010000000000000515BI0100001191 | ||
| 81 | 61.01 | Two or more coats on new work | BI01010001010000000000000515BI0100001192 | 243 | sqm |
| 82 | 62 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). including cost and conveyance of all materials, labour charges, scaffoldings etc complete as directed by the Engineer-in-Charge at all levels.\n | BI01010001010000000000000515BI0100001193 | 43 | sqm |
| 83 | 63 | Finishing walls with textured exterior paint of required shade:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including\npriming coat of exterior primer applied @ 2.20kg/10 sqm | BI01010001010000000000000515BI0100001194 | 90 | sqm |
| 84 | 64 | Providing and applying melamine matt finish on wood work after scraping and cleaning the surface applying necessary coats of putty, filler and sealer, etc. Sanding shall be done along the grains using water paper/emery paper before applying filler, sealer and melamine to get a perfectly smooth and uniform finish. Melamine and sealer shall be applied using spary gun. The rate shall include cost and conveyance of all materials, lead lift, all labour | BI01010001010000000000000515BI0100001195 | 3 | sqm |
| 85 | 65 | (SH :10.0 SANITARY INSTALLATION)\nProviding & fixing of star white vitreous China European wall hung pan with soft close seat and lid with CP brass hinges and rubber buffers with ceramic cistern dual flush as per apporoved make or equivalent etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001196 | 3 | no |
| 86 | 66 | Providing & fixing of star white vitreous china under counter wash basin of approved size, C P brass waste assembly, CP brass bottle trap with pipes wall flanges and rubber adapters for waste connection,angle valve, pillar cock, complete including CI/MS brackets duly painted, nuts, washers, etc. complete, as per apporoved make or equivalent ,testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001197 | 5 | no |
| 87 | 67 | Providing & fixing star white vitreous china flat back urinal with CP brass flush valve of approved size ,approved make or equivalent with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. | BI01010001010000000000000515BI0100001198 | 3 | no |
| 88 | 68 | Providing and fixing of star white vitreous china urinal division plate of approved quality and make or equivalent with fittings/fastener including cutting and making good the walls, cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge. ( | BI01010001010000000000000515BI0100001199 | 3 | no |
| 89 | 69 | Providing and fixing CP brass hand spray with lever control (health faucet) of make 1meter long braided hose and wall hook,CP brass angle valve and all fittings etc. as per approved make or equivalent etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001200 | 4 | no |
| 90 | 70 | Providing and fixing sanitary fixtures for handicapped toilet as per approved make or equivalent including one wash basin of approved size, one pair mounting brackets and all other related CP brass fittings like pillar cock, bottle trap,angle valve,waste coupling etc.One number EWC & Cistern with raised soft push button for convenient access complete with fittings & seat cover , one no.stainless steel hinged rail 76 cm & five nos. of stainless steel grab rails 60 cm and one no.of Faucet with spatula lever etc of approved make as per drawing & as per manufactures specification .The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in charge at all levels. | BI01010001010000000000000515BI0100001201 | 1 | no |
| 91 | 71 | Providing and fixing CP brass body bib cock as per approved make or equivalent etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001202 | 4 | no |
| 92 | 72 | Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing. | BI01010001010000000000000515BI0100001203 | 2.4 | sqm |
| 93 | 73 | Providing and fixing PVC floor trap of 110mm outer dia(multitrap) including SS cockroach free floor grating with cup etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001204 | 8 | no |
| 94 | 74 | Providing and fixing under counter mounting pressmatic liquid soap dispenser etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001205 | 2 | no |
| 95 | 75 | Providing and fixing stainless steel pedal type dust bin etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001206 | 2 | no |
| 96 | 76 | Providing and fixing cleanout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001207 | 4 | no |
| 97 | 77 | Providing and fixing CP robe hook etc complete testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. | BI01010001010000000000000515BI0100001208 | 3 | no |
| 98 | 78 | Providing and fixing concealed floor trap including SS cockroach free floor grating with cup etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. | BI01010001010000000000000515BI0100001209 | 1 | no |
| 99 | 79 | Providing and fixing C.P. brass concealed stop cock (control valve) of standard design and of approved make conforming to IS:8931 etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(exclusive of all taxes) of CP stop cock exposed part is Rs 245/-,concealed part is Rs504/-).\n20 mm nominal bore. | BI01010001010000000000000515BI0100001210 | 2 | no |
| 100 | 80 | Providing and fixing Polyethylene septic tank (approved make) of Type 30-35 flushings/day consisting of 3 chambers and minimum 1 manhole made in single moulding process as per manufacturer's specification, as directed by Engineer in Charge | BI01010001010000000000000515BI0100001211 | 1 | no |
| 101 | 81 | (SH: -11.0- WATER SUPPLY PIPING WORKS)\nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | BI01010001010000000000000515BI0100001212 | ||
| 102 | 81.01 | 62.5mm nominal dia (2.5\") | BI01010001010000000000000515BI0100001213 | 6 | m |
| 103 | 81.02 | 50mm nominal dia (2\") | BI01010001010000000000000515BI0100001214 | 30 | m |
| 104 | 81.03 | 40mm nominal dia (11/2\") | BI01010001010000000000000515BI0100001215 | 6 | m |
| 105 | 81.04 | 32mm nominal dia (11/2\") | BI01010001010000000000000515BI0100001216 | 18 | m |
| 106 | 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall | BI01010001010000000000000515BI0100001217 | ||
| 107 | 82.01 | 65mm nominal dia (2.5\") | BI01010001010000000000000515BI0100001218 | 6 | m |
| 108 | 82.02 | 50mm nominal dia (2\") | BI01010001010000000000000515BI0100001219 | 18 | m |
| 109 | 82.03 | 40mm nominal dia (11/2\") | BI01010001010000000000000515BI0100001220 | 18 | m |
| 110 | 82.04 | 32mm nominal dia (11/4\") | BI01010001010000000000000515BI0100001221 | 12 | m |
| 111 | 82.05 | 25mm nominal bore(3/4\") | BI01010001010000000000000515BI0100001222 | 6 | m |
| 112 | 82.06 | 20mm nominal bore(1/2\") | BI01010001010000000000000515BI0100001223 | 6 | m |
| 113 | 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001224 | ||
| 114 | 83.01 | 32mm nominal dia | BI01010001010000000000000515BI0100001225 | 27.6 | m |
| 115 | 83.02 | 25mm nominal dia | BI01010001010000000000000515BI0100001226 | 26.4 | m |
| 116 | 83.03 | 20mm nominal dia | BI01010001010000000000000515BI0100001227 | 25.2 | m |
| 117 | 83.04 | 15mm nominal dia | BI01010001010000000000000515BI0100001228 | 12 | m |
| 118 | 84 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels | BI01010001010000000000000515BI0100001229 | ||
| 119 | 84.01 | 65mm dia | BI01010001010000000000000515BI0100001230 | 1 | no |
| 120 | 84.02 | 50mm dia | BI01010001010000000000000515BI0100001231 | 2 | no |
| 121 | 84.03 | 40mm dia | BI01010001010000000000000515BI0100001232 | 2 | no |
| 122 | 84.04 | 32mm dia | BI01010001010000000000000515BI0100001233 | 2 | no |
| 123 | 84.05 | 25mm dia | BI01010001010000000000000515BI0100001234 | 2 | no |
| 124 | 84.06 | 20mm dia | BI01010001010000000000000515BI0100001235 | 1 | no |
| 125 | 85 | Supplying and fixing C I Non return valve PN 16 with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer- in-Charge at all levels | BI01010001010000000000000515BI0100001236 | ||
| 126 | 85.01 | 40 mm nominal bore | BI01010001010000000000000515BI0100001237 | 1 | no |
| 127 | 85.02 | 50 mm nominal bore | BI01010001010000000000000515BI0100001238 | 1 | no |
| 128 | 85.03 | 65 mm nominal bore | BI01010001010000000000000515BI0100001239 | 1 | no |
| 129 | 86 | Providing and fixing CI fabricated Y type strainer rating PN 10 complete with SS 304 filter screen of 1mm Perforation,flanges as per BS 10 etc .including all accessories ,cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge.\n50mm 'Y' type strainer | BI01010001010000000000000515BI0100001240 | 1 | No |
| 130 | 87 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI0100001241 | 6000 | litres |
| 131 | 88 | (SH: - 12.0- SANITARY PIPING WORKS)\nSupplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge | BI01010001010000000000000515BI0100001242 | ||
| 132 | 88.01 | 160mm OD(6 kg/cm2) | BI01010001010000000000000515BI0100001243 | 24 | m |
| 133 | 88.02 | 110mm OD(6 kg/cm2) | BI01010001010000000000000515BI0100001244 | 24 | m |
| 134 | 88.03 | 75mm OD(6 kg/cm2) | BI01010001010000000000000515BI0100001245 | 12 | m |
| 135 | 89 | Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge. | BI01010001010000000000000515BI0100001246 | ||
| 136 | 89.01 | 110mm OD (6 kg/cm2) | BI01010001010000000000000515BI0100001247 | 6 | m |
| 137 | 89.02 | 75mm OD (6 kg/cm2) | BI01010001010000000000000515BI0100001248 | 18 | m |
| 138 | 89.03 | 75mm OD (4 kg/cm2) | BI01010001010000000000000515BI0100001249 | 18 | m |
| 139 | 90 | Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. | BI01010001010000000000000515BI0100001250 | ||
| 140 | 90.01 | 110mm OD (6 kg/cm2) | BI01010001010000000000000515BI0100001251 | 18 | m |
| 141 | 90.02 | 75mm OD( 6 kg/cm2) | BI01010001010000000000000515BI0100001252 | 25 | m |
| 142 | 90.03 | 50mm OD(6 kg/cm2) | BI01010001010000000000000515BI0100001253 | 30 | m |
| 143 | 91 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete | BI01010001010000000000000515BI0100001254 | ||
| 144 | 91.01 | 150mm dia RCC pipes | BI01010001010000000000000515BI0100001255 | 18 | m |
| 145 | 91.02 | 300mm dia RCC pipes | BI01010001010000000000000515BI0100001256 | 12 | m |
| 146 | 92 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001257 | 8 | no |
| 147 | 93 | Supplying and fixing following size cover with frame(heavy duty) for manholes including cost and conveyance of all materials, labour charges, lead, lift, all taxes, sundries, etc., complete as directed by the Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001258 | ||
| 148 | 93.01 | 600x600 D.I. cover with frame(heavy duty) for manholes(Total weight of cover and frame to be not less than 208 kg.(weight of cover 108 kg and frame 100 kg) | BI01010001010000000000000515BI0100001259 | 8 | no |
| 149 | 93.02 | 450X450 D.I. cover with frame(heavy duty) for manholes | BI01010001010000000000000515BI0100001260 | 2 | no |
| 150 | 93.03 | 300X300 D.I. cover with frame(heavy duty) for manholes | BI01010001010000000000000515BI0100001261 | 2 | no |
| 151 | 94 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil and unserviceable material as directed, within a lead of 50 m | BI01010001010000000000000515BI0100001262 | ||
| 152 | 94.01 | Pipes, cables etc. not exceeding 80mm dia | BI01010001010000000000000515BI0100001263 | 18 | m |
| 153 | 94.02 | In all kinds of soil for pipes, cables etc exceeding 80mm dia but not exceeding 300mm dia. | BI01010001010000000000000515BI0100001264 | 48 | m |
| 154 | 94.03 | Supplying, fixing, testing and commissioning to the satisfaction of Engineer in charge of PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and water tight C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge | BI01010001010000000000000515BI0100001265 | 2 | no |
| 155 | 95 | Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels. | BI01010001010000000000000515BI0100001266 | ||
| 156 | 95.01 | 110mm dia | BI01010001010000000000000515BI0100001267 | 2 | no |
| 157 | 95.02 | 75mm dia | BI01010001010000000000000515BI0100001268 | 4 | no |
| 158 | 96 | Supplying, fixing, testing and commissioning to satisfaction of Engineer in charge of CI Gratings of approved quality including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels\n150 x 150mm | BI01010001010000000000000515BI0100001269 | 12 | no |
| 159 | 97 | Supplying and fixing of Centrifugal Monobloc pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency \nHead- 9 m\nDischarge-7 m3/hr | BI01010001010000000000000515BI0100001270 | 1 | no |
| 160 | 98 | Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. | BI01010001010000000000000515BI0100001271 | ||
| 161 | 98.01 | 40 mm dia | BI01010001010000000000000515BI0100001272 | 1 | no |
| 162 | 99 | (SH : -13.0 - LAND DEVELOPMENT WORKS)\nProviding and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting\nand proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge. | BI01010001010000000000000515BI0100001273 | ||
| 163 | 99.01 | 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. | BI01010001010000000000000515BI0100001274 | 335 | Nos |
| 164 | 100 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.\nWith material conforming to Grade-III (size range 75\nmm to 0.075 mm ) having CBR Value-30 | BI01010001010000000000000515BI0100001275 | 67 | Nos |
| 165 | 101 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be approved by Engineer-in-Charge). | BI01010001010000000000000515BI0100001276 | 6 | Nos |
| 166 | 102 | Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge. | BI01010001010000000000000515BI0100001277 | 84 | Nos |
| 167 | 103 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001278 | 5 | Nos |
| 168 | 104 | PART -A- CABLES AND CABLING\nSupply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. | BI01010001010000000000000515BI0100001279 | ||
| 169 | 104.01 | 2C 6 Sq.mm Al | BI01010001010000000000000515BI0100001280 | 88 | m |
| 170 | 104.02 | 3C 4sqmm Cu | BI01010001010000000000000515BI0100001281 | 66 | m |
| 171 | 104.03 | 4C 2.5sqmm Cu | BI01010001010000000000000515BI0100001282 | 66 | m |
| 172 | 105 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | BI01010001010000000000000515BI0100001283 | ||
| 173 | 105.01 | 2C 6 Sq.mm Al | BI01010001010000000000000515BI0100001284 | 4 | no |
| 174 | 105.02 | 3C 4sqmm Cu | BI01010001010000000000000515BI0100001285 | 4 | no |
| 175 | 105.03 | 4C 2.5sqmm Cu | BI01010001010000000000000515BI0100001286 | 4 | no |
| 176 | 106 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall or surface as required. | BI01010001010000000000000515BI0100001287 | ||
| 177 | 106.01 | Upto 35 sq. mm (clamped with 1mm thick saddle) | BI01010001010000000000000515BI0100001288 | 34 | m |
| 178 | 107 | Laying of one number PVC insulated and PVC sheathed armoured power cable of 1.1kV grade fo the following sizes in ground including excavation ,sand cushioning , providing protective covering and refilling the trench etc. as required. | BI01010001010000000000000515BI0100001289 | ||
| 179 | 107.01 | Upto 35 sq. mm | BI01010001010000000000000515BI0100001290 | 114 | m |
| 180 | 108 | Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. | BI01010001010000000000000515BI0100001291 | ||
| 181 | 108.01 | Upto 35 sq. mm | BI01010001010000000000000515BI0100001292 | 45 | m |
| 182 | 109 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. | BI01010001010000000000000515BI0100001293 | ||
| 183 | 109.01 | Upto 35 sq mm | BI01010001010000000000000515BI0100001294 | 27 | m |
| 184 | 110 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required | BI01010001010000000000000515BI0100001295 | ||
| 185 | 110.01 | 50 mm dia | BI01010001010000000000000515BI0100001296 | 20 | m |
| 186 | 111 | PART -B- WIRING AND ACCESSORIES\nWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Note:The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item circuit wiring) | BI01010001010000000000000515BI0100001297 | 22 | no |
| 187 | 112 | Group controlled light point with 1.5 sq. mm wire - Wiring for Group controlled light point (from one point to another point) with 3X 1.5 sq. mm PVC insulated, (FRLS), copper conductor cable in surface/recessed mounted rigid medium class 20mm PVC conduit with all accessories as required. ( Note: This item does not include the cost of MCB or 16Amp/ 6Amp one way switches. The total distance from one point to another point will not exceed 5meters. In case if the total length increases 5meters, the additional lengtth shall be measured under item circuit wiring The distance from DB to 1st point will be measured under point circuit wiring. | BI01010001010000000000000515BI0100001298 | 5 | no |
| 188 | 113 | Circuit wiring -Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | BI01010001010000000000000515BI0100001299 | ||
| 189 | 113.01 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | BI01010001010000000000000515BI0100001300 | 55 | m |
| 190 | 113.02 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001301 | 70 | m |
| 191 | 113.03 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | BI01010001010000000000000515BI0100001302 | 30 | m |
| 192 | 114 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | BI01010001010000000000000515BI0100001303 | 3 | no |
| 193 | 115 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). | BI01010001010000000000000515BI0100001304 | 5 | no |
| 194 | 116 | Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL) | BI01010001010000000000000515BI0100001305 | 2 | no |
| 195 | 117 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. | BI01010001010000000000000515BI0100001306 | ||
| 196 | 117.01 | 20 mm | BI01010001010000000000000515BI0100001307 | 20 | m |
| 197 | 117.02 | 25 mm | BI01010001010000000000000515BI0100001308 | 20 | m |
| 198 | 117.03 | 32 mm | BI01010001010000000000000515BI0100001309 | 20 | m |
| 199 | 118 | PART -C -DISTRIBUTION BOARD AND ACCESSORIES\nSupplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | BI01010001010000000000000515BI0100001310 | ||
| 200 | 118.01 | 12 way, Double door | BI01010001010000000000000515BI0100001311 | 2 | no |
| 201 | 119 | Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required | BI01010001010000000000000515BI0100001312 | ||
| 202 | 119.01 | 2 pole 25 amps. (230 Volts),30mA sensitivity. | BI01010001010000000000000515BI0100001313 | 2 | no |
| 203 | 120 | Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. | BI01010001010000000000000515BI0100001314 | ||
| 204 | 121 | 6A to 32A, SP, B/C-CURVE | BI01010001010000000000000515BI0100001315 | 11 | no |
| 205 | 122 | 6 A to 32A TP MCB, C-CURVE | BI01010001010000000000000515BI0100001316 | 2 | no |
| 206 | 123 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. | BI01010001010000000000000515BI0100001317 | 5 | no |
| 207 | 124 | Supply installation, testing and commissioning of DOL starter upto 5HP,3ph motor including auxilliary contactors, capacitor of suitable rating, Single phase prevention and all necessary accessories as required complete. | BI01010001010000000000000515BI0100001318 | 1 | no |
| 208 | 125 | Supply and fixing outdoor type thermo plastic START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make) | BI01010001010000000000000515BI0100001319 | 1 | no |
| 209 | 126 | PART -D LIGHT FIXTURES AND FANS\nSupply of indoor decorative surface mounted LED Batten with Polycarbonate body and Diffuser,along with driver,system wattage of 20+/-2 Watts,lumen output of lamp greater than or equal to 1800 lumen, power factor > 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: WiproLL20-221-XXX-65-NE or Crompton Greaves DMLN1LT16+LTT8-20 or equivalent Apporved make | BI01010001010000000000000515BI0100001320 | 11 | no |
| 210 | 127 | Supply of BULK HEAD luminaire suitable for outdoor operation with Polycarbonate housing and Polycarbonate Diffuser with provision of End to End connection,along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 800, power factor > 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: LL20-111-XXX-65-NE or Crompton Greaves LCTL-9-CDL or equivalent approved make | BI01010001010000000000000515BI0100001321 | 8 | no |
| 211 | 128 | Supply of indoor decorative surface mounted LED Batten with Polycarbonate housing and Polycarbonate Diffuser with provision of End to End connection,along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 800, power factor > 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: LL20-111-XXX-65-NE or Crompton Greaves LCTL-9-CDL or equivalent approved make | BI01010001010000000000000515BI0100001322 | 4 | no |
| 212 | 129 | Supply of 400 mm size wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.(Make: CG- WM HI FLO NEO or equivalent approved make). | BI01010001010000000000000515BI0100001323 | 4 | no |
| 213 | 130 | Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make) | BI01010001010000000000000515BI0100001324 | 4 | no |
| 214 | 131 | ITC LIGHT FITTINGS AND FANS\nInstallation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/LED Fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001325 | 23 | no |
| 215 | 132 | Installation, testing and commissioning of Wall fan, including all the supports as required and wiring using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc complete. | BI01010001010000000000000515BI0100001326 | 4 | no |
| 216 | 133 | Installation, testing and commissioning of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing & commissioning etc as required. | BI01010001010000000000000515BI0100001327 | 4 | no |
| 217 | 134 | PART - E- EARTHING AND SAFETY EQUIPMENTS\nEarthing with C.I. earth pipe 4 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate) | BI01010001010000000000000515BI0100001328 | 1 | no |
| 218 | 135 | Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. | BI01010001010000000000000515BI0100001329 | ||
| 219 | 135.01 | 25mm X 6mm GI | BI01010001010000000000000515BI0100001330 | 11 | m |
| 220 | 135.02 | 3.15mm Cu (10 SWG) | BI01010001010000000000000515BI0100001331 | 30 | m |
| 221 | 136 | Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | BI01010001010000000000000515BI0100001332 | ||
| 222 | 136.01 | 25mm X 6mm GI | BI01010001010000000000000515BI0100001333 | 11 | m |
| 223 | 136.02 | 3.15mm Cu (10 SWG) | BI01010001010000000000000515BI0100001334 | 160 | m |
AI Tender Summary
Tender Timeline
Nov 01, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender