Military Engineer Services-MES has published Provision Of Accn For Night Picket At Ridge Area Addition Alteration To Bldg No P 10 1 Provision Of Rcc Septic Tank For 100 And 150 Users Under Ge Satwari. Submission Date for this Tender is 18-11-2019. Septic Tank Tenders in JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work: PROVISION OF ACCN FOR NIGHT PICKET AT RIDGE AREA, ADDITION/ALTERATION TO BLDG NO P-10/1,PROVISION OF RCC SEPTIC TANK FOR 100 AND 150 USERS UNDER GE SATWARI | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr complete as specified. | BI01010001010000000000000515BI0100001143 | 2 | Cubic Metre |
| 2 | 2 | Taking down cement plaster of any description on brick wall including racking out joints, hacking for key, scrubbing down with water and removing all the demolished material outside cantt area complete all as specified and as directed. | 100 | Square Metre | |
| 3 | 3 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing all the demolished material outside Cantt area complete all as specified. | 20 | Cubic Metre | |
| 4 | 4 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge. | 488 | Cum | |
| 5 | 5 | Excavation over area n exe 1.5m deep and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge. | 140 | Cum | |
| 6 | 6 | Excavating over areas, exc 1.5m in depth but n.exc 3.0 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge. | 60 | Cum | |
| 7 | 7 | Surface dressing n exc 15cm deep and getting out in any type of soil complete all as specified. | 118 | square meter | |
| 8 | 8 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, all as specified. | 40 | square meter | |
| 9 | 9 | Spreading and levelling in layers n exc. 25 cm thick,watering and well ramming in layers as in floors with earth obtained from excavation complete all as specified and directed by Engineer-In-Charge. | 20 | Cum | |
| 10 | 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge. | 2.6 | Cum | |
| 11 | 11 | Removing excavated materials/ soils, to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge. | 260 | Cum | |
| 12 | 12 | Removing excavated materials/ soils, to a distance exceeding 250mtrs but not exceeding 500 mtr and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge. | 225 | Cum | |
| 13 | 13 | Material and labour for concrete bed in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) to drain pipe 150mm bore including packing under & haunching against the sides after they are laid and tested complete all as specfied. | 394 | Running Metre | |
| 14 | 14 | Material and labour for salt glazed stone ware 150 mm bore internal diameter drain pipe grade 'A' laid in trenches and jointed in cement mortar 1:2complete all as specified and directed by Engr-in-Charge. | 422 | Running Metre | |
| 15 | 15 | Material and labour RCC (Design Mix) M-25 as in columns, pillars, piers, posts and struts etc complete all as specified and directed \n | 5 | Cubic Metre | |
| 16 | 16 | Material and labour RCC (Design Mix) M-25 as in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified and directed\n | 16 | Cubic Metre | |
| 17 | 17 | Material and labour RCC (Design Mix) M-25 as in beams , cantilevers, bressummers, lintel over 1.5 m span completed all as specified ad directed.\n | 10 | Cubic Metre | |
| 18 | 18 | Material and labour for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns complete all as directed.\n | 27 | Cubic Metre | |
| 19 | 19 | Material and labour RCC (Design Mix) M-25 as in in slabs supported on walls beams and clumns in floors, roofs, landings, balcony, canopies, deck slabs and in slaves and like..\n | 59 | Cubic Metre | |
| 20 | 20 | Material and labour RCC (Design Mix) M-25 as in chajjas fins, facias,etc completed all as specified as directed\n | 2.6 | Cubic Metre | |
| 21 | 21 | Supplying, laying, jointing & testing galvanised iron pipe 20 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc fixed to walls or laid in floors including all fittings complete all as specified and directed. \n | 20 | Running Metre | |
| 22 | 22 | Supplying, laying, jointing & testing galvanised iron pipe 15 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc fixed to walls or laid in floors including all fittings complete all as specified and directed. \n | 20 | Running Metre | |
| 23 | 23 | Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge. | 61 | Cubic Metre | |
| 24 | 24 | Plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge. | 16 | Cubic Metre | |
| 25 | 25 | Material and labour for ATT treating in contact with foundation at the rate of 7.5 ltrs of emulsion per sqm of vertical surface area | 19 | Square Metre | |
| 26 | 26 | Material and labour for ATT treating under the soil surfaces of plinth protecion at the rate of 5 ltrs of emulsion per sqm of surface area | 30 | Square Metre | |
| 27 | 27 | Material and labour for ATT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area | 22 | Square Metre | |
| 28 | 28 | Material and labour for ATT treating the top surfaces of filled earth at the rate of 5 ltrs of emulsion per sqm of surface area | 160 | Square Metre | |
| 29 | 29 | Material and labour for brick work in cement mortar 1:6 using sub-class B bricks straight or curved on plan exc 6m mean radius all as specified. | 34 | Cubic Metre | |
| 30 | 30 | Material and labour for brick work in cement mortar 1:4 using sub-class B bricks straight or curved on plan exc 6m mean radius all as specified. | 124 | Cubic Metre | |
| 31 | 31 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.\n | 1033 | Square Meter | |
| 32 | 32 | Material and labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.\n | 95 | Square Meter | |
| 33 | 33 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified.\n | 125 | Square Meter | |
| 34 | 34 | Rendering 15 mm thick, on other than fair faces of brick or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and fair without using extra cement including mixing of water proofing compound, complete all as specified and as directed by Engineer-In-Charge. Note :-- WPC shall be measured and paid separately | 204 | Square Metre | |
| 35 | 35 | Supply only water proofing compound liquid.\n | 10 | Ltrs | |
| 36 | 36 | Plain cement concrete M-15(1:2:4), type B-0 (using 12.5mm graded crushed stone aggregate), nominal mix, 25 mm thick, as in floors, finished even and fair complete all as specified and as directed by Engineer-In-Charge. | 20 | Square Metre | |
| 37 | 37 | Material and labour for hardcore of broken stone of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick watered and well rammed to a true surface, complete all as specified and directed | 13 | Cubic Metre | |
| 38 | 38 | Supply and fixing in repair cast iron,75 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors. | 12 | Running Metre | |
| 39 | 39 | Supply and fixing in repair cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed | 8 | Each | |
| 40 | 40 | Supply and fixing in repair cast iron cowls complete all as specified and directed | 4 | Each | |
| 41 | 41 | Material and labour for precast factory made designer tiles (Rectified interlocking tiles) glazed top complete made in white cement and pigment of thickness not less than 19mm in different colour and pattern (compressive strength not less than 250 kg/sqcm) set and jointed in neat cement slurry (colour and pattern as per sample kept in GE office as approved by GE) laid over 20mm thick screed bed in CM 1:4 over 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate over rammed earth complete all as specified and directed by Engr-in-Charge. | 40 | Square Metre | |
| 42 | 42 | Material and labour for roof tiles Manglore pattern interlocking tiles) glazed top complete laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge. | 2 | Square Metre | |
| 43 | 43 | Material and labour Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified and directed | 4.75 | Cubic Metre | |
| 44 | 44 | Material and labour for Machine cut kota stone 53x53 cm slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polishing 100mm wide marble patti/ border complete with and including 15mm thick screed bed CM 1:6, all as specified and directed. | 80 | Square Metre | |
| 45 | 45 | Material and labour for Kota stone slab 18-20mm thick and 53x53 cm in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with & including 10mm thick screed bed in CM 1:3 to match the existing finish of Kota stone complete all as directed by Engineer-in-Charge. | 8 | Square Metre | |
| 46 | 46 | PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed by Engineer-In-Charge. | 4 | Each | |
| 47 | 47 | Use and waste formwork to sides of pillars, posts, struts, pier, column square, rectangular or polygonal rough finished surface of concrete\n | 60 | Square meter | |
| 48 | 48 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves etc with fair finished surface of concrete. | 50 | Square meter | |
| 49 | 49 | Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter,for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge. | 357 | Sqm | |
| 50 | 50 | Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge. | 230 | Running Metre | |
| 51 | 51 | Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge. | 6 | Running Metre | |
| 52 | 52 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge. | 70 | Sqm | |
| 53 | 53 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge. | 212 | Sqm | |
| 54 | 54 | Formwork to fins, louvers, fascia and similar items including edges complete for flat and rough finished surfaces all as specified and directed by Engineer-in-Charge. | 8 | Sqm | |
| 55 | 55 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified. | 140 | Each | |
| 56 | 56 | TMT bars 10 mm and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge. | 6600 | Per Kilogram | |
| 57 | 57 | Description all as per item No 56 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and builders. | 810 | Per Kilogram | |
| 58 | 58 | TMT bars 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge. | 55 | Per Kilogram | |
| 59 | 59 | Round bars 10 mm dia and over upto and including 10mm dia as in hooks of manhole cover,rungs etc complete all as specified and directed by Engineer-In-Charge. | 100 | Per Kilogram | |
| 60 | 60 | Mild steel flat & angle iron as in manhole cover frame including , drilling holes, welding , etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-In-Charge. | 580 | Per Kilogram | |
| 61 | 61 | Material and labour Non - skid Ceramic coloured joint less tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed CM 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room) | 32 | Square Metre | |
| 62 | 62 | Material and labour for glazed ceramic highlighter coloured tile 450mm x 300mm x 8mm thick on vertical surface as in skirting/dado etc set and jointed with neat cement slurry and pointed with white cement mixed with colour to match the tile complete all as specified and directed. | 24 | Square Metre | |
| 63 | 63 | Supply and fixing 300mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and\ntwo on staple plate and fixed | 1 | Each | |
| 64 | 64 | Supply and fixing secondclass hardwood cleats,small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary’ labours; articles n exc 200 cu. cm each | 2 | Each | |
| 65 | 65 | Vitreous China wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), and PVC connection 15 mm dia 450 mm long complete all as specified and as directed by Engineer-In-Charge. | 1 | Each | |
| 66 | 66 | Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge. | 179 | Sqm | |
| 67 | 67 | Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of alkali resistant priming paint with 2mm thick birla white wall putty as under coat complete all as specified.\n | 80 | Square Metre | |
| 68 | 68 | Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coats of oil emulsion distemper on walls, pillars, cornices surface including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required. etc. complete all as specified and directed. | 30 | Square Metre | |
| 69 | 69 | Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion over and including one coat of primer over two coats of Birla wall care putty 2 to 3 mm thick on plastered surfaces, preparatory to distempering, complete all as specified and as directed by Engineer-In-Charge.\n | 15 | Square Metre | |
| 70 | 70 | Material and labour for preparation of new plastered/concreat surface of wall, chajja, facia, face of columns, beam etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coats of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified. | 15 | Square Metre | |
| 71 | 71 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new surface over 10cm width or girth complete all as directed by Engr-in-Charge | 40 | Square Metre | |
| 72 | 72 | Material and labour for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and necessary putty filling with knife of same colour where required to make surface even and smooth complete all as specified and directed.\n | 10 | Square Metre | |
| 73 | 73 | Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer including necessary rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface complete all as specified ooth complete all as specified and directed..\n | 5 | Square Metre | |
| 74 | 74 | Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of ceilings, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots,rubbing with sand paper and applying one coat of white wash on ceiling complete all as specified and directed.\n | 12 | Square Metre | |
| 75 | 75 | Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surface complete all as specified ooth complete all as specified and directed. | 6 | Sqm | |
| 76 | 76 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint over and including one coat of primer, complete all as specified and as directed by Engineer-In-Charge. | 135 | Sqm | |
| 77 | 77 | Material and labour for Vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest with 'P' or 'S' trap (excluding flushing cistern and flush pipe) and provision of lime concrete and making good floor, all as specified. | 13 | Each | |
| 78 | 78 | Supply and fixing 10 litres capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe 32mm bore as required and a pair of bracket etc complete all as specified | 1 | Each | |
| 79 | 79 | Supply and fixing Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete, fixed in repairs all as specified and as directed. | 1 | Each | |
| 80 | 80 | Supply and fixing PVC urinal partition wall colour/design, size 400 x 700 x 25 mm, complete, fixed in repairs all as specified and as directed. | 1 | Each | |
| 81 | 81 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 82 | 82 | Rotational moulded polyethylene water storage tanks of 500 liters capacity,triple layered white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, complete all as specified and as directed by Engineer-in-Charge. | 2 | Each | |
| 83 | 83 | Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge. | 10 | Per Running Metre | |
| 84 | 84 | Supply and fixing Pressed steel frame of size 125x60mm for doors with double rebated including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock, strike plate and fixing arrangement with and including back filling of chowkats in PCC 1:3:6 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 5 | Running Metre | |
| 85 | 85 | Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as directed. | 2 | square meter | |
| 86 | 86 | Powder coated Aluminium door shutter including door frame of hollow section 63.5mm x 38.1mm xthickness not less than 1.53 mm including aluminium anodized powder coated of hollow section glazed shutter of stiles size 85mm x 44.45mm xthickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mmxthickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm xthickness not less than 1.50mm and bottom rail of hollow section 114.3mm x 44.45mmx thickness not less than 1.50mm ,one derived handle 300mm long,100mm long but hinges, aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers of Godrej make and glazing with select quality tinted glass 5mm thick or panelling with ACP sheet and cleat rubber packing aluminium beading including aluminium hardware fitting complete all as specified and as directed by Engr-in-Charge and approved by GE .Note : (i)Glass /ACP sheet and aluminium floor type hydraullic door closerinserts shall be measured and paid seperately under respective items. Make:Jindal,Hindalco,Indal | 2 | square meter | |
| 87 | 87 | Powder coated Aluminium anodized door frame of size 125 mm x 44.45mm xthickness not less than 1.60 mm fixed to floor/wall with plugs and screws complete all as specified and as directed by Engr-in-Charge and approved by GE .Note : Make:Jindal,Hindalco,Indal | 23 | Running meter | |
| 88 | 88 | Supply and fixing aluminium powder coated sliding windows three track with mosquito proofing with style 44.4 x 44.5 x2 mm thickness not less than 1.56mm fixed type partition with glazing clips rubber gasket / rubber beading and screws for fixing of glass / ACP inserts complete including 5.50 mm thick coloured / tinted glass panes all as directed by Engr-in-Charge and as approved by GE.. \nMake:Jindal,Hindalco,Indalco | 10 | square meter | |
| 89 | 89 | Supply and fixing 5.5mm thick (minimum) plain tinted / coloured glass sheet fixed with aluminium bead in squares exc 0.5 sq mtr in each pane complete all as specified and as directed by Engr-in-Charge and approved by GE | 5 | square meter | |
| 90 | 90 | Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balasters walk ways, railing, frame work for water tanks and similar work conforming to Fe 290 (Gde E-165), all as specified.\nNote : Grill will be made as per sample kept in sub division office. | 25 | kilo gram | |
| 91 | 91 | Supply and fixing in repair double action door spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked) | 1 | Each | |
| 92 | 92 | Supply and fixing aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. Make: Everest,Universal,Godrej. | 1 | Each | |
| 93 | 93 | Supply and fixing in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 65 mm including complete accessories complete all as specified. Make:- Links Locks/ Godrej | 1 | Each | |
| 94 | 94 | Supply and fixing galvanized mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staples complete all as directed.\n | 10 | Square Metre | |
| 95 | 95 | Material & labour 3mm thick sheet glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane complete all as specified. (Make Saint Gobin) | 4 | Square Metre | |
| 96 | 96 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed by Engineer-In-Charge. | 2 | Sqm | |
| 97 | 97 | S&F Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge. | 6 | Each | |
| 98 | 98 | Aluminium anodised, barrel tower bolts of extruded Section, size 150 mm long and fixed, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 99 | 99 | Supply and fixing Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than\n10mm dia 100mm size.(ISI marked), complete all as specified and as directed by Engineer-In-Charge. | 3 | Each | |
| 100 | 100 | Aluminium handles, cast type, anodised, size 150 mm, complete all as specified and as directed by Engineer-In-Charge. | 4 | Each | |
| 101 | 101 | Supply and fixing Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter ( wire and glass panes shall be measured and paid separately ) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete | 7 | Square Metre | |
| 102 | 102 | Supply and fixing 35mm thick 2nd class Hardwood factory made rail and style plain framed, panelled shutter (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as directed. | 2 | Square Metre | |
| 103 | 103 | Preparation of concrete /plastered surface by scrubbing down with steel brushes and cleaning with water all loose dirt / dust and applying roof treatment as below:-- (i) Rendering 15mm thck in CM 1:4 mixed with integral Water proofing compound on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPA shall be measured separately) (ii) Applying 1st coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely (iii) Applying 2nd course of a coat of blown type bitumen of grade 85/25 heated to a temperature of 180 degree centigrade and applying @ 1.2 kg/sqm completely (iv) Applying 3rd course of Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (v) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite Note : Ponding shall be done over RCC slab by filling water which shall be kept for 48 hours.In case a slightest indication of seepage / leakage is noticed the same shall be rectified by grouting the affected portion at no extra cost.Thereafter ponding test shall be repeated till there is no indication of seepage /leakage before application of roof treatment.A proper record of ponding test of RCC slabs shall be maintained by Engr in Charge.The arrangement of ponding test shall be made by the contractor and shall be included in the quoted rates.. | 110 | Square Metre | |
| 104 | 104 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge. | 125 | Sqm | |
| 105 | 105 | Material and labour for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item. | 27.05 | Cum | |
| 106 | 106 | Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels and drains including necessary formwork complete all as specified and directed. | 96 | Cum | |
| 107 | 107 | Material and labour 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floors,path,pavings,hardstanding and similar works laid in alternate bays finished even and smooth without using extra cement including necessary formwork complete all as directed. | 40 | Square Metre | |
| 108 | 108 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds,mitred/stopped ends etc complete all as specified and as directed by Engineer-In-Charge. | 414 | Running Metre | |
| 109 | 109 | Add or deduct for each 25 cm girth or part thereof over or under 30 cm ditto srl item above complete all as specified and as directed by Engineer-In-Charge. | 320 | Running Metre | |
| 110 | 110 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 111 | 111 | Stop valves, concealed type,cast copper alloy,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed by Engineer-In-Charge. | 5 | Each | |
| 112 | 112 | Tubular towel rail, 20mm dia, D type, 60cm long between flanges, chromium plated fixed to walls with chromium plated brass screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 113 | 113 | PVC (SWR) pipes, 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge. | 6 | Per Running Metre | |
| 114 | 114 | PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge. | 86 | Per Running Metre | |
| 115 | 115 | PVC (SWR) bends of 110 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 116 | 116 | PVC (SWR) bends of 75 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge. | 16 | Each | |
| 117 | 117 | PVC (SWR) branch piece,single (single Y) equal or\nunequal of 100 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 118 | 118 | PVC (SWR) branch piece,single (single Y) equal or\nunequal of 75 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 119 | 119 | PVC (SWR) reducers of 110 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge. | 2 | Each | |
| 120 | 120 | PVC (SWR) floor trap, plain with grating including\njointing with solvent cement for bore of pipe 75 mm dia complete all as specified and as directed by Engineer-In-Charge. | 14 | Each | |
| 121 | 121 | Supply and fixing stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle for pipe of bore 20mm complete all as specified | 2 | Each | |
| 122 | 122 | Plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), 75mm thick, as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all as specified and as directed by Engineer-In-Charge. | 117 | Sqm | |
| 123 | 123 | Bailing out of conteminated water from manholes of any size and depth with suitable capacity pumps, etc of any capacigty and depth and removing to a distance exceeding 50mtr but not exceeding 100mtr in such a manner not to cause any inconvenience /nusiance, spreading unslaked lime over the area to make if hygenically fit, complete all as directed by the Engr-in-Charge (All works to be carried out under foul conditions.) | 4 | Cubic Metre | |
| 124 | 124 | Cleaning of sludge including dewatering/pumping/bailing out of conteminated water from septic tanks including inlet/outlet chambers, etc of any capacigty and depth and removing sludge (soil material) to a distance exceeding 50mtr but not exceeding 100mm and burring in pits including rough excavation of pits and carriage of sludge to pits and covering the pit with earth with a lahyer of 25cm thick and spreading unslaked line over the covered pits to make if hygenically fit, complete all as directed by the Engr-in-Charge | 10 | Cubic Metre | |
| 125 | 125 | Septic tank for 10 users, twin chamber, (Brick construction) with top of slab in RCC 1:2:4 , including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CEPZ/C-TD/013/13 Sheet 1/5 to 5/5. | 1 | Each | |
| 126 | 126 | Soakage well, 3.0 mtr dia and 3.00 mtr depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundation, brick work in CM 1:4, RCC 1:2:4 Cover slab, manhole cover with angle iron frame, appropriate and suitable size brick bat filling, SWG junction 150mm bore CI vent pipe and Cowl etc. complete all as specified and as shown on drawings. (Soak well shall be constructed as per CE Pathankot Zone TD No CEPZ/C-TD/013/13 Sheet 1 to 5). | 4 | Each | |
| 127 | 127 | Soakage well, 1.80m dia and 3.00 m depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundation, brick work in CM 1:4, RCC 1:2:4 Cover slab, manhole cover with angle iron frame, appropriate and suitable size brick bat filling, SWG junction 150mm bore CI vent pipe and Cowl etc. complete all as specified and as shown on drawings. (Soak well shall be constructed as per CE Pathankot Zone TD No CEPZ/C-TD/013/13 Sheet 1 to 5). | 1 | Each | |
| 128 | 128 | Loose filling with broken stone aggregate of guage 80 to 150 mm in soakage pits,soakage wells and septic tanks, complete all as directed by the Engr-in-Charge (All works to be carried out under foul conditions.) | 6 | Cubic Metre | |
| 129 | 129 | Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised suitable size sunken boxes incl white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.Make of wire: Havells/Polycab. | BI01010001010000000000000515BI0100001296 | 24 | Per Point |
| 130 | 130 | Description all as per srl item No 129 but one 3 pin socket outlet 6 amp independent board. | BI01010001010000000000000515BI0100001297 | 6 | Per Point |
| 131 | 131 | Description all as per srl item No 129 but one 3 pin socket outlet 6 amp on same board. | BI01010001010000000000000515BI0100001298 | 3 | Per Point |
| 132 | 132 | Description all as per srl item No 129 but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in continuous earth wire. complete all as specified and directed. | BI01010001010000000000000515BI0100001301 | 4 | Per Point |
| 133 | 133 | All as per srl item No 129 above but for AC plug in socket independent with cable of size 4 Sqmm for point wiring and 4 sqmm as in continuous earth wire.(Note Plug in Socket will be measured and paid Seperatetly) | BI01010001010000000000000515BI0100001302 | 1 | Per Point |
| 134 | 134 | Supply and fixing AC single phase 240 Volt 50Hz ceiling fan of size 1200mm sweep 5 star rating with canopy and hanging rod with all accessories incl nuts, bolts, clamps etc., complete all as specified and directed.\nMake : Havells cat part No ES-50 premium 5 star ISI marked, Crompton cat part No : Entrust 50 | BI01010001010000000000000515BI0100001334 | 5 | Each |
| 135 | 135 | Supply and fixing Exhaust fan 250 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl taking down of unsv exhaust fan complete all as specified and directed.\nMake : Crompton/Bajaj/Havells. | BI01010001010000000000000515BI0100001345 | 2 | Each |
| 136 | 136 | Supply and fixing sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.Make of wire: Havells/Polycab. \n | BI01010001010000000000000515BI0100001347 | 55 | Running Metre |
| 137 | 137 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps Make Havells catpart no.DHDPUSN032 rating or equivelent of legrand complete all as specified and directed. | BI01010001010000000000000515BI0100001354 | 1 | Each |
| 138 | 138 | Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. | BI01010001010000000000000515BI0100001358 | 1 | Each |
| 139 | 139 | Supply and fixing switch Polycarbonate material ISI marked one way, 6 Amps, 240 V Make: Cat Ref 800100 Elvira Indoasian or equivalent in Havells, Legrand. | 33 | Each | |
| 140 | 140 | Supply and fixing socket outlet 6 Amps 3 pin universal Socket complete all as specified and directed Make . Cat Ref 800120 Elvira Indoasian or equivalent in Havells, Legrand. | 9 | Each | |
| 141 | 141 | Supply and fixing switch Polycarbonate material ISI marked one way 16 Amps , 240 V Make, Cat Ref 800103 Elvira Indoasian or equivalent in Havells, Legrand. | 4 | Each | |
| 142 | 142 | Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed. | 20 | Each | |
| 143 | 143 | S&F socket outlet 6 / 16 Amps 3 pin socket complete all as specified and as directed having pencil free operation & child safety shutter . Make: Cat Ref 800122 Elvira Indoasian or equivalent in Havells, Legrand. | 4 | Each | |
| 144 | 144 | Supply and fix Fan regulator step type 2 Module stepped type (electronic) for 1200/1400mm sweep AC ceiling fan. Make: Havells Cat Part No: AHERFXW002,HPL Cat Part No:SSTFDFR,Anchor Deluxe White Code 14502 | 5 | Each | |
| 145 | 145 | Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Box type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or equivalent in Havells, Wipro alongwith LED tubeRod with heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton or equivalent in Havells, Wipro. \nNote:- The LED batten and LED tube rod shall be of same make.\n\n | 13 | Each | |
| 146 | 146 | Supply and fixing of lamp holder, PVC /Polycarbonate type with back plate for batten fitting with LED bulb 7 Watt. | 4 | Each | |
| 147 | 147 | Supply and fixing LED lamp suitable for B22 holder of capacity 7 watt Make : Havells, Philips, Wipro, Jaquar. | 4 | Each | |
| 148 | 148 | Supply and fixing Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar, Earth Bar ,neutral Bar Door Earthing .Makes: IndoAsian Optipro Cat Part No 811807 or or equivalent in Havells/ Legrand | 2 | Each | |
| 149 | 149 | Supply and fixing MCB Double Pole complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.Make:- IndoAsian Optipro Cat Part No 811173 or equivalent in Havells/ Legrand | 2 | Each | |
| 150 | 150 | Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ Legrand | 12 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
