Military Engineer Services-MES has published Repair/ Replacement Of External Water Supply Lines And Allied Works At Ponda Under Ge Panaji , Goa . . Submission Date for this Tender is 20-11-2019. Water Pipe Line Tenders in GE Panaji Goa. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR/ REPLACEMENT OF EXTERNAL WATER SUPPLY LINE AND ALLIED WORKS AT PONDA UNDER GE PANAJI, GOA. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of pipe line etc, and getting out in hard/ dense soil complete all as specified and directed. | 90 | Cum | |
| 2 | 2 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/ dense soil complete all as specified and directed. | 87 | Cum | |
| 3 | 3 | Removing excavated surplus hard/ dense soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 3 | Cum | |
| 4 | 4 | Supply and laying 50mm bore galvanised iron steel water tubing of medium grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. | 100 | RM | |
| 5 | 5 | Supply and laying 40mm bore galvanised iron steel water tubing of medium grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. Note for Serial item No 4 & 5:- (i) The quoted rates deemed to be inclusive of cutting, jointing and testing of the pipe. (ii) Excavation and earth work shall be measured and paid separately under relevant item of Sch ‘A’. | 50 | RM | |
| 6 | 6 | Supply and laying 50mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. | 50 | RM | |
| 7 | 7 | Supply and laying 40mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. | 50 | RM | |
| 8 | 8 | Supply and laying 25mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. Note for Serial item No 6 to 8:- (i) Excavation and earth work shall be measured and paid separately under relevant item of Sch ‘A’ (ii) The quoted rates deemed to be inclusive of cutting, jointing and testing of the pipe. | 200 | RM | |
| 9 | 9 | Supply and fix 40mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and fixed complete to walls and ceilings or laid in floors including dismantling old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. | 100 | RM | |
| 10 | 10 | Supply and fix 25mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and fixed complete to walls and ceilings or laid in floors including dismantling old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. | 100 | RM | |
| 11 | 11 | Supply and fix 20mm bore un plasticised PVC water pipes of pressure rating10 kgf/Sq cm. with and including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and fixed complete to walls and ceilings or laid in floors including dismantling old unserviceable pipe line along with fittings from existing connections complete all as specified and directed. Note for Serial item No 10 to 12:- The quoted rates deemed to be inclusive of cutting, jointing and testing of the pipe. | 25 | RM | |
| 12 | 12 | Supply and fix 150mm dia cast iron sluice valve PN-1.6 conforming to IS 14846/ 2000, ISI Marked with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts etc. including dismantling of old unserviceable sluice valve fixed at any location complete all as specified and directed. | 1 | Each | |
| 13 | 13 | Supply and fix 100mm dia cast iron sluice valve PN-1.6 conforming to IS 14846/ 2000, ISI Marked with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts etc. including dismantling of old unserviceable sluice valve fixed at any location complete all as specified and directed. | 2 | Each | |
| 14 | 14 | Supply and fix 80mm dia cast iron sluice valve PN-1.6 conforming to IS 14846/ 2000, ISI Marked with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts etc. including dismantling of old unserviceable sluice valve fixed at any location complete all as specified and directed. | 4 | Each | |
| 15 | 15 | Supply and fix 80mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling the old unserviceable gate valves from existing pipe line at any location complete all as specified and directed. | 7 | Each | |
| 16 | 16 | Supply and fix 50mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling the old unserviceable gate valves from existing pipe line at any location complete all as specified and directed. | 6 | Each | |
| 17 | 17 | Supply and fix 40mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling the old unserviceable gate valves from existing pipe line at any location complete all as specified and directed. | 6 | Each | |
| 18 | 18 | Supply and fix 25mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling the old unserviceable gate valves from existing pipe line at any location complete all as specified and directed. | 8 | Each | |
| 19 | 19 | Supply and fix 20mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling the old unserviceable gate valves from existing pipe line at any location complete all as specified and directed. | 6 | Each | |
| 20 | 20 | Material and labour for brick masonry valve chamber of size 1.00M x 1.00M x 1.00M (internal size) with 150mm thick PCC foundation 1:4:8, type D2 using 40mm graded trap stone aggregate, brick masonry wall with sub class 'B' bricks 23cm thick built in cement mortar 1:6, 10mm thick plastering to internally and 15mm thick externally, 15cm below ground level, with PCC 1:2:4, type B1 using 20mm graded trap stone aggregate coping 50mm thick including chamber cover with frame made of angle iron of size 40mm x 40mm x 6mm and MS sheet of 2.5mm thick including MS hinges, locking arrangement with provision of locks and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary earth work, excavation, demolition of existing chamber etc. complete all as specified and directed. | 2 | Each | |
| 21 | 21 | Material and labour for brick masonry valve chamber of size 1.50M x 1.50M x 1.50M (internal size) with 150mm thick PCC foundation 1:4:8, type D2 using 40mm graded trap stone aggregate, brick masonry wall with sub class 'B' bricks 23cm thick built in cement mortar 1:6, 10mm thick plastering to internally and 15mm thick externally, 15cm below ground level, with PCC 1:2:4, type B1 using 20mm graded trap stone aggregate coping 50mm thick including chamber cover with frame made of angle iron of size 40mm x 40mm x 6mm and MS sheet of 2.5mm thick including MS hinges, locking arrangement with provision of locks and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary earth work, excavation, demolition of existing chamber etc. complete all as specified and directed. | 2 | Each | |
| 22 | 22 | Material and labour for PCC 1: 3: 6, type C1, using 20mm graded crushed trap stone aggregate for making good the road cutting surface complete all as specified and directed. | 1 | Cum | |
| 23 | 23 | Material and labour for mild steel plain black sheet 2.5mm thick cut to size and fixed with mild steel hinges to steel members with bolts and nuts with all necessary drilling, bending, welding etc as required for existing valve chamber cover and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including dismantling the old unserviceable chamber cover complete all as specified and directed. | 5.5 | Sqm | |
| 24 | 24 | Cleaning of 40000 gallons capacity underground sump at pump house No 1 and 2 by draining out water from the tank with portable pump sets, removing sludge, mud or any other foreign materials from the bottom and internal surface and cleaning by wire brushing, washing internally by using bleaching powder and applying two coat of white lime wash including re-writing the date of cleaning, capacity of the tank etc. with fluorescent white paint on black back ground complete all as specified and as directed. | 2 | Each Job | |
| 25 | 25 | Cleaning of 80000 gallons capacity over head water tank at 18m staging located at main pump house by draining out water from the tank, removing sludge, mud or any other foreign materials from the bottom and internal surface and cleaning by wire brushing, washing internally by using bleaching powder and applying two coats of white lime wash including re-writing the date of cleaning, capacity of the tank etc with fluorescent white paint on black back ground complete all as specified and as directed. | 1 | Each Job | |
| 26 | 26 | Cleaning of over head service water tank of RCC/ PVC not exceeding 500 litre capacity and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the washed water from the tank and washing internally by using bleaching powder and again draining out the water from the tank and applying two coats of white lime wash to RCC tank and re-writing the date of cleaning with white paint on black background complete all as specified and directed. | 127 | Each | |
| 27 | 27 | Cleaning of over head service water tank of RCC/PVC exceeding 500 litre but not exceeding 1000litre capacity and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the washed water from the tank and washing internally by using bleaching powder and again draining out the water from the tank and applying two coats of white lime wash to RCC tank and re-writing the date of cleaning with white paint on black back ground complete all directed. | 50 | Each | |
| 28 | 28 | Cleaning of over head service water tank of RCC/PVC exceeding 1000 litre but not exceeding 2000litre capacity and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the washed water from the tank and washing internally by using bleaching powder and again draining out the water from the tank and applying two coats of white lime wash to RCC tank and re-writing the date of cleaning with white paint on black back ground complete all directed. | 22 | Each | |
| 29 | 29 | Supply and fix 80mm dia cast iron foot valve suitable for sewage pump including dismantling the old unserviceable one complete all as specified and directed. | 4 | Each | |
| 30 | 30 | Supply and fix 25mm dia ball valves (minimum weight 455 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. | 30 | Each | |
| 31 | 31 | Supply and fix 20mm dia ball valves (minimum weight 210 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. | 34 | Each | |
| 32 | 32 | Supply and fix 15mm dia ball valves (minimum weight 142 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. | 9 | Each | |
| 33 | 33 | Repair to water leakage of inlet pipe connected to float valve of RCC/ PVC service water tanks by removing short piece of pipe/ barrel nipple and replace with suitable, new barrel nipple, socket, elbow and rectify the water leakage by using the water proofing material complete all as specified and directed. | 23 | Each job | |
| 34 | 34 | Material and labour for applying one coat of synthetic enamel paint to the surface of all GI/ CI pipe of any size inside/ outside of pump house complete all as directed. Note: The surface of GI/ CI pipe shall be painted with black colour. | 2 | Job | |
| 35 | 35 | Material and labour for pressure gauge to read in IS/ BS unit type Kg/sqcm and LB/sqinch reading marked 0-2, 0-30 respectively including taking down old one complete all as specified and directed. | 1 | Each | |
| 36 | 36 | Supply and fix automatic star delta starter in steel sheet enclosure suitable for 3phase, 415V, 50HZ pump set 10HP to 15HP motor including taking existing defective star delta starter complete all as specified and as directed. | 1 | Each | |
| 37 | 37 | Supply and fix DOL starter in steel sheet enclosure type suitable for 3 phase, 415V, 50HZ pump set 5HP, relay range 12-18Amps including taking down existing defective star delta starter complete all as specified and directed. | 1 | Each | |
| 38 | 38 | Material and labour for jointing the leakage of 80mm dia cast iron pipe with jointing kit complete with saddle piece and heavy duty plastic pipe required length upto 1mtr long fixed over the leakage surface of cast iron pipe including excavation, removing and refilling complete all as specified and as directed. | 4 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
