Procurement Of Led Light
Tender Overview
Project Description
Procurement Of Led Light , Led Type Aviation Obstruction Light ( Aol ) Fixture Complete With Lamp , Built-In Flasher Etc . As Per The Following Specifications: ( 1 ) Supply Voltage: 230V Ac , 50Hz , Single Phase ( 2 ) Colour: Red ( 3 ) Viewing Angle: 360 Degrees ( 4 ) Directional Radial Intensity ( Medium Intensity ) : Initial Designed Intensity Value Greater Than 3200 Candela < ( >&< ) > Minimum 2000+ / - 25% Candela Through Out Operating Life Of The Unit . ( 5 ) Led Cluster: High Bright Red Colour Leds Connected In Series And Parallel Circuits Mounted On A Replaceable Moulded Frame With E27 Apaptor . Leds Used Should Be Of Special Industrial Grade Utilising Inp Led Technology Suitable For Outdoor Application Which Can Withstand High Humidity And High Temperature Conditions . ( 6 ) Enclosure: The Led Cluster Shall Be Mounted In Weather Proof , Corrosion Proof Ip 65 Protected Enclosure Of Aluminium Alloy Lm6 With Toughened Borosilicate Glass Dome . All Hardware Used Must Be Of Rustproof . ( 7 ) Cable Termination: Terminals Shall Be Brought To An Integral Terminal Box And Connected To Terminal Strips Suitable For 2 . 5Sqmm Copper Cable . ( 8 ) Cable Entry: 2 Nos . Of 3 / 4 Et With One No . Plugged . ( 9 ) Mounting Arrangement: Pedestal Or Structural Mounting Arrangement Shall Be Provided . ( 10 ) Power Consumption Should Not Exceed 85 Watts . ( 11 ) Finish : Aviation Yellow Epoxy Paint Or Powder Coated . ( 12 ) Flashing : 20-60 Fpm ( Flashes Per Minute ) ( 13 ) Earthing Terminals : Required ( 14 ) Gasket : Temperature Resistant Neoprene Gasket ,
BOQ
| ITEM: LED LIGHT | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description(Click Sheet 'SPEC' to view full specification) | Item Code / Make | Quantity | Units | |
| 1 | 1 | LED type Aviation Obstruction Light (AOL) fixture complete with lamp,\nbuilt-in flasher etc. as per the following specifications:\n(1) Supply voltage: 230V AC, 50Hz, single phase\n(2) Colour: RED\n(3) Viewing angle: 360 degrees\n(4) Directional radial intensity (medium intensity): initial designed\nintensity value greater than 3200 candela <(>&<)> minimum 2000+/- 25%\ncandela\nthrough out operating life of the unit.\n(5) LED Cluster: High bright red colour LEDs connected in series and\nparallel circuits mounted on a replaceable moulded frame with E27\napaptor. LEDs used should be of special industrial grade utilising InP\nLED Technology suitable for outdoor application which can withstand high\nhumidity and high temperature conditions.\n(6) Enclosure: The LED cluster shall be mounted in weather proof,\ncorrosion proof IP 65 protected enclosure of Aluminium alloy LM6 with\ntoughened borosilicate glass dome. All hardware used must be of\nrustproof.\n(7) Cable termination: Terminals shall be brought to an integral\nterminal box and connected to terminal strips suitable for 2.5sqmm\ncopper cable.\n(8) Cable entry: 2 Nos. of 3/4 ET with one No. plugged.\n(9) Mounting arrangement: Pedestal or structural mounting arrangement\nshall be provided.\n(10) Power consumption should not exceed 85 watts.\n(11) Finish : Aviation yellow epoxy paint or powder coated.\n(12) Flashing : 20-60 fpm (flashes per minute)\n(13) Earthing terminals : Required\n(14) Gasket : temperature resistant neoprene gasket | Item1 | 20 | Number |
| 2 | Total in Figures |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender