Chirayinkeezhu Block Panchayat 2019-20-Rennovation Of Anjuthengu Chc Gate Construction And Building Maintenance
Tender Value
4.45 Lakhs
Estimated cost
Bid Submission
05 Nov 2019
0 days left
EMD
12500
Bank guarantee accepted
Document Fee
1190
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHIRAYINKEEZHU → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Chirayinkeezhu Block Panchayat 2019-20-Rennovation Of Anjuthengu Chc Gate Construction And Building Maintenance
BOQ
| Work Name:Proj 72/20-Chirayinkeezhu Block Panchayath:- Rennovation of Anjuthengu CHC | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | maintenance and gate construction | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001114 | 6.75 | cum |
| 3 | 1.002 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001115 | 0.675 | cum |
| 4 | 1.003 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001116 | 2.311 | cum |
| 5 | 1.004 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 2.25 | cum |
| 6 | 1.005 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001118 | 1.345 | cum |
| 7 | 1.006 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001119 | 9.08 | sqm |
| 8 | 1.007 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001120 | 8.26 | sqm |
| 9 | 1.008 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001121 | 5.3 | sqm |
| 10 | 1.009 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001122 | 18 | sqm |
| 11 | 1.01 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001123 | 5.3 | sqm |
| 12 | 1.011 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001124 | 84 | sqm |
| 13 | 1.012 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001125 | 812.251 | kilogram |
| 14 | 1.013 | 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | BI01010001010000000000000515BI0100001126 | 510 | kg |
| 15 | 1.014 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001127 | 35 | sqm |
| 16 | 1.015 | od192030/2019_2020 : Providing and laying clading tiles in different sizes(thickness to be specified by manufacturer)of approved make in all colours & shade,in skirting,riser of steps,over 12 mm thick bed of cement mortar 1:3 (1cement:3 coarse sand),including grouting the joint with white cement &matching pigments etc.complete<br>size of Tile 100mmx450mm | BI01010001010000000000000515BI0100001128 | 35 | sqm |
| 17 | 1.016 | od192034/2019_2020 : S /F Name board of size 70x60 cm installed in the appropriate place visible to the public made of brick wall with granite plaque should be inscerted and engraving letters etc complete as per the direction of deptl. officers atsite | BI01010001010000000000000515BI0100001129 | 1 | each |
| 18 | 1.017 | od201496/2019_2020 : Providing and fixing 0.46mm thick Aluminium sheet roofing upto any pitch and fixing with J or L bolt, hooks and nuts Aluminium plain and bitumen washers or self drilling fasteners and EPDM washers etc complete including cutting sheets to size and shapes wherever necessary for ridges or valleys 450 mm | BI01010001010000000000000515BI0100001130 | 7 | metre |
| 19 | 1.018 | od201497/2019_2020 : Providing and fixing precoated aluminium trafford profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46mm , powder coated aluminium sheet avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal/ J or L clamp complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001131 | 40 | sqm |
| 20 | 1.019 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001132 | 154.8 | kg |
| 21 | 1.02 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001133 | 50 | kg |
| 22 | 1.021 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001134 | 2.025 | cum |
| 23 | 1.022 | 50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | BI01010001010000000000000515BI0100001135 | 4.651 | cum |
| 24 | 1.023 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001136 | 89.3 | sqm |
| 25 | 1.024 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001137 | 89.3 | sqm |
| 26 | 1.025 | 13.71 : Lettering with black Japan pint of approved brand and manufacture | BI01010001010000000000000515BI0100001138 | 500 | per Letter per cm height |
| 27 | 1.026 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001139 | 60 | sqm |
| 28 | 1.027 | 14.55.1 : Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001140 | 40 | sqm |
| 29 | 1.028 | od192063/2019_2020 : Providing & fixing on roof pressed clay tile (spanish tile)of 20 mm nominal thickness,15cmx15cm size,and of approved size and as per approved pattern on cement mortar. 1:4,12 mm thick. | BI01010001010000000000000515BI0100001141 | 10 | sqm |
| 30 | 1.029 | od192064/2019_2020 : Providing & fixing on roof pressed clay ridge tile (spanish tile) of 20mm nominal thickness, 15cmx15cm size, and of approved size and as per approved pattern on cement mortar.1:4 12 mm thick. | BI01010001010000000000000515BI0100001142 | 7 | metre |
| 31 | 1.03 | od192076/2019_2020 : supplying and fixing 150mm dia pvc rain water gutter semicircular section including fitting with 32m*5m MS flat supports at 1m interval etc.complete. | BI01010001010000000000000515BI0100001143 | 15 | metre |
| 32 | 1.031 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001144 | 13 | sqm |
AI Tender Summary
Tender Timeline
Oct 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender