Smp Nilakkal Construction Of Vehicle Parking Ground Re Tender
Tender Value
3.90 Crore
Estimated cost
Bid Submission
02 Nov 2019
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puthenchanthai → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Smp Nilakkal Construction Of Vehicle Parking Ground Re Tender
BOQ
| Name of Work: SMP- Construction of Vehicle Parking Ground at Nilakkal | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\n All kinds of soil | BI01010001010000000000000515BI0100001112 | 20000 | Cu.m |
| 2 | 2 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.3793 m.All kinds of soil | 15000 | Sq.m | |
| 3 | 3 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | 15000 | Sq.m | |
| 4 | 4 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam(WMM)specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | 4500 | Cu.m | |
| 5 | 5 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per\nthe direction of Engineer-in-charge. | 15000 | Sq.m | |
| 6 | 6 | Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve\nshall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | BI01010001010000000000000515BI0100001113 | 18 | Cu.m |
| 7 | 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.3793 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.3793 m, disposed earth to be levelled and neatly dressed for all kinds of soil | BI01010001010000000000000515BI0100001114 | 2000 | Cu.m |
| 8 | 8 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | BI01010001010000000000000515BI0100001115 | 2000 | Sq.m |
| 9 | 9 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam(WMM)specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001116 | 600 | Cu.m |
| 10 | 10 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning\nwith mechanical broom.With rapid setting bitumen emulsion On W.B.M / W.M.M. @ 0.4 kg/ sqm | BI01010001010000000000000515BI0100001117 | 2000 | Sq.m |
| 11 | 11 | 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively,\nincluding a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for separately) :With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53-1999 | BI01010001010000000000000515BI0100001118 | 2000 | Sq.m |
| 12 | 12 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG- 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm\nof road surface including rolling and finishing with road roller all complete. | BI01010001010000000000000515BI0100001119 | 2000 | Sq.m |
| 13 | 13 | Appendix C-Drain Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.3793 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.3793 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | BI01010001010000000000000515BI0100001120 | 550 | Cu.m |
| 14 | 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001121 | 60 | Cu.m |
| 15 | 15 | Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.3793:3 (1 cement : 1.3793 coarse sand : 3 graded stone aggregate 20 mm nominal size) side of drain | BI01010001010000000000000515BI0100001122 | 160 | Cu.m |
| 16 | 16 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.3793:3 (1 cement : 1.3793 coarse sand : 3 graded stone aggregate 20 mm nominal size) covering slab for drain | BI01010001010000000000000515BI0100001123 | 84 | Cu.m |
| 17 | 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) for irish drain | BI01010001010000000000000515BI0100001124 | 26 | Cu.m |
| 18 | 18 | Conveying and placing cover slabs over drains in lines and levels as per the diretion of engineer in charge | BI01010001010000000000000515BI0100001125 | 250 | Sq.m |
| 19 | 19 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001126 | 1300 | Sq.m |
| 20 | 20 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. | BI01010001010000000000000515BI0100001127 | 10080 | Kg |
| 21 | 21 | cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat\ncement.12 mm cement plaster | BI01010001010000000000000515BI0100001128 | 1000 | Sq.m |
AI Tender Summary
Tender Timeline
Oct 26, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 05, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender