Kolkata Metropolitan Development Authority-KMDA has published Tender For Rejuvenation And Redevelopment Of Patuli Floating Market , Under Kmc Ward No . 110 , Kolkata , West Bengal. Submission Date for this Tender is 18-11-2019. Civil Work Tenders in Patuli Floating Market West Bengal. Bidders can get complete Tender details and download the document.
Name of Work:REJUVENATION AND REDEVELOPMENT OF PATULI FLOATING MARKET, UNDER KMC Ward No. 110, Kolkata, West Bengal. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety | BI01010001010000000000000515BI0100001113 | 59.622 | Cum |
2 | 2 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]\nIn Ground Floor(i) 4mm | BI01010001010000000000000515BI0100001114 | 615.6 | Sqm |
3 | 3 | Reinforcement for reinfoced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, Reinforcement for reinfoced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL | BI01010001010000000000000515BI0100001115 | 9.576 | MT |
4 | 4 | Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one minimum side lap complete. b) 2.0mm +/- 0.2 mm thick sheet.(3.25Kg/Sq.m) iii) Coloured other than natural white or tinted blue | BI01010001010000000000000515BI0100001116 | 798 | Sqm |
5 | 5 | Labour for Taking out carefully existing existing old,damaged Floating and submerged boat (If any) from water body and keep at existing footpath at site safely for repairing purpose by mannual or mechanical means\n | BI01010001010000000000000515BI0100001117 | 114 | Each |
6 | 6 | Dismantling carefully wood work in posts, postplates, rafters, partition etc., sorting and stacking serviciable materials at site and removing rubbish as directed. | BI01010001010000000000000515BI0100001118 | 92.112 | Cu.M. |
7 | 7 | Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square). d) Other Local Wood. | BI01010001010000000000000515BI0100001119 | 92.112 | Cu.M. |
8 | 8 | Coal tarring :(a) One coat | BI01010001010000000000000515BI0100001120 | 8073.48 | sqm |
9 | 9 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber, bamboo or plastered surface , two coats ( with ant shade except white). | BI01010001010000000000000515BI0100001121 | 5586 | sqm |
10 | 10 | Supplying fitting and fixing water proof curtains (.75 gsm thick) with roll up arrangement\n | BI01010001010000000000000515BI0100001122 | 5130 | Sqm |
11 | 11 | Labour for Placing in position carefully of repaired boat by haulage, hoisting and erection all complete by mannual or mechanical means\n | BI01010001010000000000000515BI0100001123 | 114 | Each |
12 | 12 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m | BI01010001010000000000000515BI0100001124 | 12.791 | M.T |
13 | 13 | I) For structural members of specified sections weighing less than 22.5 Kg./m | BI01010001010000000000000515BI0100001125 | 145.315 | M.T |
14 | 14 | II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m | BI01010001010000000000000515BI0100001126 | 9.891 | M.T |
15 | 15 | Driving M.S. sheet piles/M.S Rolled Section /Steel Joist of any kind of approved type and size conforming to IS code in all kinds of soil/ soil mixed with gravel, shingle & pebbles, by monkey hammer including handling, cutting to requisite size, drilling holes, hoisting in position, welding, fabrication of sets of tapper piles, corner piles etc. with clutch bars as may be required including staging, scaffolding and hire charges of driving machinery and equiepments, craping and cleaning piles, painting the sufrace with one coat of surface primer of approved make and brand and two coats of ready mixed oil bound paint (except red lead and black japan) etc including all cost of labours, supply and carriage of equipments to site (by any mean) as per drawing and direction of EIC but excluding the cost of sheet piles. N.B. Measurement of area underground to be taken i.e. straight length of pile multiplied by driven length. And incase of M.S Rolled section the area will be periferial length multiplied by driven length with in earth only | BI01010001010000000000000515BI0100001127 | 2019 | Sqm |
16 | 16 | Additional cost For string staging under specific instruction of Engineer-in-charge or for driving from pontoon or boats the rate will be enhanced by ` 4.00 per meter. i) For Steel Joist | BI01010001010000000000000515BI0100001128 | 3345 | Mtr. |
17 | 17 | Providing anti-corrosive protective coating to inhibit the corrosion to HYSD reinforcements including two coats of anti-corrosive coatings of consumption as per anufacturer's specification, cleaning etc. complete as per the direction of the Engineer-in- Charge. | BI01010001010000000000000515BI0100001129 | 8094.27 | Sqm |
18 | 18 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc.fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.)\n(The quantum should be corrected upto three decimals)(ii) Sal : Local. | BI01010001010000000000000515BI0100001130 | 10.14 | Cu.M. |
19 | 19 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel ( Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of ilicon sealant), labour, scaffolding and all other incidental charges e.g. VAT,s Labour cess etc complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating ) | BI01010001010000000000000515BI0100001131 | 136.275 | Sqm |
20 | 20 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. ii) For other Structural works like galleries etc. | BI01010001010000000000000515BI0100001132 | 5.663 | M.T |
21 | 21 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001133 | 3606 | Sqm |
22 | 22 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:- a) With 0.5 mm thick sheet | BI01010001010000000000000515BI0100001134 | 295.338 | Sqm |
23 | 23 | Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). (A) 300 mm lapping each way(a) With 0.71 mm sheet | BI01010001010000000000000515BI0100001135 | 145 | Mtr. |
24 | 24 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. | BI01010001010000000000000515BI0100001136 | 19 | Cu.M. |
25 | 25 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. (a) upto 150 mm. thick | BI01010001010000000000000515BI0100001137 | 30 | Cu.M. |
26 | 26 | Labour for Taking out carefully existing existing old paverblock including removing debris and stacking the serviceable\nmaterials at site.a) In ground floor including roof. (a) upto 80 mm. thick | BI01010001010000000000000515BI0100001138 | 293 | Sqm |
27 | 27 | Labour for Resetting disturbed paver block on new line level bed .including ramming and dressing bed to proper level and filling joints with sand as necessary with paver joints properly filled in and packed with local sand or powdered earth and including necessary cushion of similar materials below the pavera) In ground floor including roof. (a) upto 80 mm. thick | BI01010001010000000000000515BI0100001139 | 390 | Sqm |
28 | 28 | Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed.(i) 150mm diameter | BI01010001010000000000000515BI0100001140 | 5135 | Mtr. |
29 | 29 | (i) 100mm diameter | BI01010001010000000000000515BI0100001141 | 975 | Mtr. |
30 | 30 | Coal tarring on wooden surfaces including cost of materials(a) Double coat. | BI01010001010000000000000515BI0100001142 | 3925 | Sqm |
31 | 31 | Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.i) 150mm diameter | BI01010001010000000000000515BI0100001143 | 3575 | Mtr. |
32 | 32 | Labour for fitting and fixing 10 cm. to 13 cm. diameter Sal-bullah/Eucalyptus-bullah as ties and runners including necessary nails, bolts and nuts. | BI01010001010000000000000515BI0100001144 | 1258.98 | Mtr. |
33 | 33 | Supplying empty Cement bags in good condition. | BI01010001010000000000000515BI0100001145 | 1398 | Each |
34 | 34 | Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags. | BI01010001010000000000000515BI0100001146 | 1392 | Each |
35 | 35 | Earth work in excavation of foundation trenches or drains, in all sorts of soil(including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation noy exceeding 1,500 mm. | BI01010001010000000000000515BI0100001147 | 59 | %Cum |
36 | 36 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment of finished quantity of work).(a) With earth obtained from excavation of foundation | BI01010001010000000000000515BI0100001148 | 10 | %Cum |
37 | 37 | Filling in foundation or plinth by siver sand in layers not exceeding 150 mm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity ) | BI01010001010000000000000515BI0100001149 | 39 | %Cum |
38 | 38 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment of finished quantity of work). (iii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth. | BI01010001010000000000000515BI0100001150 | 49 | %Cum |
39 | 39 | Brick work with 1st class bricks in cement mortar (1:4) a) In foundation and plinth | BI01010001010000000000000515BI0100001151 | 1 | Cum |
40 | 40 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | BI01010001010000000000000515BI0100001152 | 51.85 | Sqm |
41 | 41 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes (a) Pakur Variety | BI01010001010000000000000515BI0100001153 | 6.767 | cum |
42 | 42 | Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (ii) Sal : Local. | BI01010001010000000000000515BI0100001154 | 8.248 | Cu.M. |
43 | 43 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc | BI01010001010000000000000515BI0100001155 | 2540 | sqm |
44 | 44 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber, bamboo or plastered surface , two coats ( with ant shade except white). | BI01010001010000000000000515BI0100001156 | 2539 | sqm |
45 | 45 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge | BI01010001010000000000000515BI0100001157 | 163 | Cu.M. |
46 | 46 | Add GST @ 12% on Item no 1 to 45 | BI01010001010000000000000515BI0100001158 | 3.50722e+07 | Rs |
47 | 47 | Add L. CESS @ 1% on Item No 1 to 46 | BI01010001010000000000000515BI0100001159 | 3.92809e+07 | Rs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail