Tender For Electrical Installation Work For Construction Of Vvpat Warehouse At The 4Th Floor Of New Administrative Building (Annex Building), Berhampore In The District Of Murshidabad.--- Supply, Installation, Testing And Commissioning Of Lift., Murshidabad-West Bengal
TDR : 22276174
Tender Notice
BOQ
Expired
Murshidabad
West Bengal
Tender For Electrical Installation Work For Construction Of Vvpat Warehouse At The 4Th Floor Of New Administrative Building (Annex Building), Berhampore In The District Of Murshidabad.--- Supply, Installation, Testing And Commissioning Of Lift.
Name of Work: Electrical Installation work for Construction of VVPAT warehouse at the 4th floor of New Administrative Building (Annex Building), Berhampore in the district of Murshidabad.--- SITC of Lift.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Supply , Installation ,Testing And Commissioning of one number 15\npersons capacity (1020kg) passenger Lift Fully automatic Door Drive\nVVVF control with ARD supported for power failure rescue operation\ntype lift including all mechanical accessories like cage, counter\nweight ,guide rail , MRL, main ropes & safety\nropes etc. as per lift I.S (Rates inclusive of all taxes) (Make-OTIS/KONE/SCHINDLER)\n
BI01010001010000000000000515BI0100001118
1
Each
2
1.01
No. & Type of lift. 1 no. 15 passenger lift.\nCapacity. 15 passengers (1020 Kg).\nSpeed. 1mt/sec.\nNo. of Stop & Opening. 5 stop / 5 opening (all opening are in the same side) \nTravel Height. 18 meter ( approx)\nPower Supply. 415 volt A.C 3phase 50 Hz +/- 10%\nControl System A.C VVVF drive with microprocessor based controller.\nOperation. Simplex full collective control with auto/attendant fully automatic.\nClear Shaft Dimension. 1950mm (W) x 2100mm (D)\nIndicator. Up – Down indication arrows and 7 segment digital car and floor position indicator.\nCar Enclosure S.S with Hair line finish, light fan, & Granite flooring.\nCar inside Area As per designed approved by EIC\nCar Door AC VVVF control automatic door in S.S with provision of Door speed adjustment.\nLanding Doors. AC VVVF control automatic door in S.S with provision of Door speed adjustment. All landing doors will frame with box.\nClear Door Opening. 800 mm X 2000 mm\nDoor Detector Systems. Full length Photocell assembly light curtain sensor.\n
BI01010001010000000000000515BI0100001119
3
1.02
Overload Protection. Audio Indication in car & lift will not start when over load actuated and door kept\nopen at that time.\nEmergency Light & Alarm. Battery operated alarm bell and emergency light of rechargeable type.\nMain Rope. 13 mm dia X 4 nos. (2:1 roping)\nCar Fan. Fan to be provided in the car. The fan is automatically switched off when there is\nno call saving electricity.\nCar Light. Decorative LED lamp to be provided in the car. The light is automatically switched\noff when there is no call for one preset period of time including (RED LED/backlit LCD, Scrolling display)\nFalse Ceiling. SS sheet in attractive design.\nCar Flooring. Marble/Granite flooring finish\nFire Man’s Switch. To be provided at ground floor landing.\nHandrail. To be provided inside the car.\nLeveling Accuracy. + / - 5 mm\nAutomatic Rescue Device. Battery operated ARD for automatic evacuation to the nearest floor in case of\npower failure in case of single phase failure.\nHome Landing. Car will automatically come to the preset home landing when there is no call.\n\n
BI01010001010000000000000515BI0100001120
4
1.03
Safety Features Over Speed & Load protection, Single Phase/Phase revers & Phase faliur protection, Interlocking switch, Emergency stop & Terminal limit switch etc & others as reqd as per direction of EIC.\nDoor Open, Door Close and Independent Service Button. 1. no COP (with DO/DC button) and 3 nos LOP suitable for G+2 floors with\nluminous push up down indicator ,digital position indicator, SS face plate etc.
BI01010001010000000000000515BI0100001121
5
2
Terms and condition\nThe Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.
BI01010001010000000000000515BI0100001122
6
2.01
Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.
BI01010001010000000000000515BI0100001123
7
2.02
If any refurbished material is supplied and installed, penal action will be taken as per existing rules.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
