Delhi Development Authority-DDA has published D/O Millennium Park Along Ring Road Between Isbt Sarai Kale Khan And Bhairon Road C/O Road , Path , Parking , External Services And Toilet Block I/C Remodeling Of Existing Boundary Wall Around Shanti Stupa And Other Miscellaneous Works . . Submission Date for this Tender is 30-10-2019. Road Work Tenders in NEW DELHI Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: D/o Millennium Park along Ring Road between ISBT Sarai Kale Khan and Bhairon Road. Sub Head : C/o Road, Path, Parking, External Services and Toilet Block i/c remodeling of existing boundary wall around Shanti Stupa and other miscellaneous works. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\na) All kinds of soil. | 52 | cum | |
| 2 | 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m:\na)All kinds of soil\nI)Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 80 | metre | |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 18 | cum | |
| 4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 5 | cum | |
| 5 | 5 | Supplying chemical emulsion in sealed containers including delivery asspecified.\na)Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | 606 | litre | |
| 6 | 6 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):\na)Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:\nI)With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration | 121 | metre | |
| 7 | 7 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:\na) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | 100 | sqm | |
| 8 | 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth\na)1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.5 | cum | |
| 9 | 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth\na)1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 9 | cum | |
| 10 | 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\na) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | 375 | cum | |
| 11 | 11 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.\na)1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | 33 | cum | |
| 12 | 12 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) | 12 | sqm | |
| 13 | 13 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 3.2 | per 50kg\ncement | |
| 14 | 14 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | 12 | sqm | |
| 15 | 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 9 | cum | |
| 16 | 16 | Centering and shuttering including strutting, propping etc. and removal of form for :\na) Suspended floors, roofs, landings, balconies and access platform | 60 | sqm | |
| 17 | 16.1 | b) Shelves (Cast in situ) | 3 | sqm | |
| 18 | 16.2 | c) Lintels, beams, plinth beams, girders, bressumers and cantilevers | 8 | sqm | |
| 19 | 16.3 | d) Edges of slabs and breaks in floors and walls under 20 cm wide | 42 | metre | |
| 20 | 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.\na) Thermo-Mechanically Treated bars of grade Fe-500D or more. | 1080 | Kg | |
| 21 | 18 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | 63 | sqm | |
| 22 | 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\na)Cement mortar 1:6 (1 cement : 6 coarse sand) | 30 | cum | |
| 23 | 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\na)Cement mortar 1:4 (1 cement : 4 coarse sand) | 1.8 | cum | |
| 24 | 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :\na)Cement mortar 1:6 (1 cement : 6 coarse sand) | 21 | cum | |
| 25 | 22 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.\na)Cement mortar 1:4 (1 cement :4 coarse sand) | 48 | sqm | |
| 26 | 23 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 48 | sqm | |
| 27 | 24 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :\na) Cement mortar 1:6 (1 cement : 6 coarse sand) | 7 | cum | |
| 28 | 25 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) \na)Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.\ni) Area of slab upto 0.50 sqm | 308 | sqm | |
| 29 | 26 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels\na)Granite of any colour and shade. \ni)Area of slab upto 0.50 sqm | 21 | sqm | |
| 30 | 27 | Area of slab over 0.50 sqm sqm 4007.65 | 3 | sqm | |
| 31 | 28 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.\na) Granite work | 145 | metre | |
| 32 | 29 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. | 6 | metre | |
| 33 | 30 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | 4 | each | |
| 34 | 31 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :\na)White sand stone - Exposed face machine cut and table rubbed with rough backing. 30 mm thick | 90 | sqm | |
| 35 | 32 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. | 117 | kg | |
| 36 | 33 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. | 900 | each | |
| 37 | 34 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge.(The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) \na)White sand stone - 30mm thick gang saw cut stone | 20 | sqm | |
| 38 | 35 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). | 30 | kg | |
| 39 | 36 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts andwasher (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. | 10 | each | |
| 40 | 37 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 190 | sqm | |
| 41 | 38 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).\na) Second class teak wood | 0.7 | cum | |
| 42 | 39 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)\na)Second class teak wood\ni) 35 mm thick shutters | 46 | sqm | |
| 43 | 40 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :\na)Second class teak wood | 37 | sqm | |
| 44 | 41 | Providing and fixing bright finished brass butt hinges with necessaryscrews etc. complete : \na) 25x85x5.5 mm (heavy type) | 84 | each | |
| 45 | 42 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :\na) 250x10 mm | 20 | each | |
| 46 | 43 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 4 | each | |
| 47 | 44 | Providing and fixing bright finished brass handles with screws etc. complete:\na)125 mm | 40 | each | |
| 48 | 45 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 8 | each | |
| 49 | 46 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge sidevertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. | 31 | metre | |
| 50 | 47 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. | 11 | sqm | |
| 51 | 48 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.\na)Casement window single panel with S.S. friction hinges (300x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) | 2.5 | sqm | |
| 52 | 49 | Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessarystainless steel screws etc. as per direction of Engineer-in-charge a) 250 x 19 x 1.9 mm | 12 | each | |
| 53 | 50 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. | 12 | each | |
| 54 | 51 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 9.5 | sqm | |
| 55 | 52 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. \nA)In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | 4052 | kg | |
| 56 | 53 | b)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works \n | 2730 | kg | |
| 57 | 54 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). \n | 655 | kg | |
| 58 | 55 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). \na)Size of Tile 600x600 mm | 60 | sqm | |
| 59 | 56 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge | 80 | metre | |
| 60 | 57 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge a)Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | 60 | sqm | |
| 61 | 58 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). | 66 | sqm | |
| 62 | 59 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\na) One or more coats on old work | 76 | sqm | |
| 63 | 60 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\na)Two or more coats on new work | 82 | sqm | |
| 64 | 61 | French spirit polishing :\n a)Two or more coats on new works including a coat of wood filler | 125 | sqm | |
| 65 | 62 | Distempering with 1st quality acrylic distemper (ready made) havingVOC content less than 50 gm per ltr. of approved manufacturerand of required shade and colour complete. as per manufacturer’sspecification.\nA) One or more coats on old work | 300 | sqm | |
| 66 | 63 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 10 | cum | |
| 67 | 64 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber andconsolidating with road rollerincluding making good the undulations etc. and re-rolling the subgrade and disposal of surplus earthwith lead upto 50 metres. | 2020 | sqm | |
| 68 | 65 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. | 192 | sqm | |
| 69 | 66 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\na) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 2 | each | |
| 70 | 67 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :\na) W.C. pan with ISI marked white solid plastic seat and lid | 5 | each | |
| 71 | 68 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\na) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. | 7 | Each | |
| 72 | 69 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 7 | Each | |
| 73 | 70 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | 7 | Each | |
| 74 | 71 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 7 | Each | |
| 75 | 72 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.\na) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | 5 | Each | |
| 76 | 73 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required \na) Range of two half stall urinals with 5 litre P.V.C. automaticflushing cistern | 1 | Each | |
| 77 | 74 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | 4 | Each | |
| 78 | 75 | Providing and fixing toilet paper holder :\na)C.P. brass | 5 | Each | |
| 79 | 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\na) 20 mm nominal outer dia Pipes. | 100 | metre | |
| 80 | 77 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :\na) 15 mm nominal bore. | 8 | Each | |
| 81 | 78 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\na) 15mm nominal bore | 15 | Each | |
| 82 | 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.\na) 100 mm nominal inner dia Pipes | 20 | metre | |
| 83 | 80 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design :\na)150 mm diameter S.W. pipe | 60 | metre | |
| 84 | 81 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\na) 150 mm dia. R.C.C. pipe | 60 | metre | |
| 85 | 82 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :\na) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :\nI) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | each | |
| 86 | 83 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. coverwith frame of 300 x300 mm size (inside) the weight of cover to be notless than 4.50 kg and frame to be not less than 2.70 kg as per standard design:\na) 100x100 mm size P type\nI)With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 4 | each | |
| 87 | 84 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :\na)With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 4 | each | |
| 88 | 85 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | 13 | kg | |
| 89 | 86 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm ofapproved texture, design and patterns having moisture content lessthan 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal levelsuspended on inter-locking metal T-Grid of hot dipped galvanisediron section of 0.33mm thick (galvanized @ 120 grams per sqmincluding both sides) comprising of main-T runners of size 15x32mm of length 3000 mm, cross - T of size 15x32 mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm oflength 600mm to form grid module of size 600 x 600 mm, suspendedfrom ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dashfasteners, 6 mm dia fully threaded hanger rod upto 1000 mm lengthand L-shape level adjuster of size 85x25x2 mm. Galvanised ironperimeter wall angle of size24x24x0.40 mm of length 3000 mm tobe fixed on periphery wall / partition with the help of plastic rawlplugs at 450 mm center to center and 40 mm long dry wall woodscrews. The work shall be carried out as per specifications, drawingand as per directions of the Engineer-in-Charge.\na) With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles. | 202 | Sqm | |
| 90 | 87 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.\na) 80mm thick C.C. paver block of M-35 grade with approved color design and pattern. | 2500 | sqm | |
| 91 | 88 | Providing and fixing in position 'L' shaped Grab Bar made up of Heavy Duty stainless steel (grade 304) 40 mm (Outer dia with 3 mm thick sheet) dia seamless pipe, & 750 mm in vertical length & 900 mm in horizontal length including base plate and steel fasteners in the toilets as per direction of Engineer-in- Charge. | 2 | Each | |
| 92 | 89 | Providing and fixing in position 'U' shaped Grab Bar made up of Heavy Duty stainless steel (grade 304) of 750 mm in length & 40 mm dia (Outer dia with 3 mm thick sheet) seamless pipe including Hinge, base plate and steel fasteners, in the toilets as per manufacturers specification, as per drawings and "Harmonized Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete as per direction of Engineer-in-charge. | 2 | Each | |
| 93 | 90 | Providing and suplying of FRP Piller cover having size 8" X 8" at base level and height 18 inch , the thickness of wall of Piller cover will be 6 mm. color of cover shall be lemon yellow of approved design as per the fulll satisfaction of Guru Ji of Shanti Stupa society as well as Engineer in Charge. | 90 | Each | |
| 94 | 91 | Providing and suplying of FRP Piller cover having size 4" X 4" at base level and height 13 inch , the thickness of wall of Piller cover will be 6 mm. color of cover shall be lemon yellow of approved design as per the fulll satisfaction of Guru Ji of Shanti Stupa society as well as Engineer in Charge. | 60 | Each | |
| 95 | 92 | Hire and running charges of Hydraulic Excavator (3D) with Driver and fuel, as per Direction of Engineer-In-Charge. | 7 | Day | |
| 96 | 93 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in- charge | 71 | Sqm | |
| 97 | 94 | Painting on M.S. sheet over roof top with a paint of exculsive quality having tempreture resitance property upto 5 degree celcius as per direction of society of shanti stupa as well as Engineer- in - Charge (Paint will be supply free of cost by shanti stupa society )\na) new work three or more coat. | 530 | Sqm | |
| 98 | 95 | Providing & fixing high quality stainless steel,resistant to corrossion hanging stainless steel dustbin in open areas inside & around viewing gallery at Millenium Park as specified below or as per direction of Engineer-in-charge. \nMaterial- Stainless steel Grade 304 \nCapacity- 100-150 Liters \nSheet- 16 swg stainless steel \nPipe- 38 mm dia with 8 mm SS plate\nStructure- Open top | 2 | Each | |
| 99 | 96 | Providing & fixing high quality stainless steel Swing Bin/dustbinin inside & around viewing gallery at Millenium Park as specified below or as per direction of Engineer-in-charge \nMaterial- Stainless steel Grade 304 \nCapacity- Apprx. 60 Liters\nSize- 12"x28" \nWeight- Apprx. 4.50 Kg | 4 | Each | |
| 100 | 97 | Providing and fixing Brass sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete :\na)300x16 mm | 8 | each | |
| 101 | 98 | Providing & fixing of Stainless Steel 3 Seater Bench with backrest (Conforming to JSL/SAIL make SS304 Grade, 240 Grit Satin finish) approximately 1730x810x480mm wide, made out of 4mm thick CNC laser cut profiles panels with slots, 4mm thick profile bracket welded to bench sheet, 175mm wide, 2mm thick C type bend structure,as per approved drawing /details and as per approved by shanti stupa society as well as Engineer in Charge.\n | 6 | Each | |
| 102 | 99 | Providing & fixing of Stainless Steel bollard assembly (Conforming to JSL/SAIL make SS304 Grade, 240 Grit Satin finish) approximately 1050mm High from Finish Floor level, consisting of Dia. 168.3mm, 3mm thick Pipe, 250x250x8mm thick base plate, 2mm thick cover cap & end caps, fixed to CC foundation(1:3:6) using 3 Nos. M12x120mm long Hex head sleeve fasteners, as per approved drawing /details and as per direction of EIC.(Payment for excavation and CC shall be paid separately).\n | 200 | Kg | |
| 103 | 100 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).\na)Granite of any colour and shade as per direction and satisfaction of Shanti Stupa society as well as Engineer- in - Charge \ni)Area of slab upto 0.50 sqm | 118 | Sqm | |
| 104 | 101 | Providing and fixing Fibre reinforced polymer (FRP) windows Frame having 6 to 8 mm wall thickness of frame and having curvature in shape as per approved drawing, size of window frame is 5' X 5' (variation upto +- 1'') complete as per direction and satisfaction of Shanti Stupa society as well as Engineer-in-Charge | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
