Lift Irrigation Scheme To Village Bah Bhalyara In G P Rakhota Tehsil Sarkaghat Distt Mandi Site Of Development For Construction Of Civil Work And Providing And Installation Of Pumping Machinery With Allied Accessories For Raw Water Stage Phase 1St And Ph
Tender Overview
Project Description
Lift Irrigation Scheme To Village Bah Bhalyara In G P Rakhota Tehsil Sarkaghat Distt Mandi Site Of Development For Construction Of Civil Work And Providing And Installation Of Pumping Machinery With Allied Accessories For Raw Water Stage Phase 1St And Phase 2Nd Balance Work Thereof
BOQ
| Name of Work: Lift Irrigation scheme to village Bah Bahlyara in G.P. Rakhota Tehsil Sarkaghat, Distt. Mandi HP. (SH: Site of development for construction of Civil work, C/O RC.C. Sump well of 143530 Ltr cp. , C/O Pump house cum Chowkidar qtr., C/O 2 Nos Delivery tank, C/O 14 Nos out lets chambers, C/O Pucca field channel = 1519 Rmt., Providing, laying and jointing of R.C.C. Pipe for destribution system, 150mm dia NP2= 900 Rmt, 150mm dia P1 = 260 Rmt, 150mm dia P2= 1550 Rmt. Providing laying and jointing MSERW 250mm dia for Rising main fo Raw water stage, laying, jointing and testing GMS pipe 150mm dia = 510 Rmt (Medium class) for Phase-I and 150mm dia = 1020 Rmt (Medium class) for Phase-2nd and Providing and installation of pumping machinery with allied accessories for Raw water stage, Phase-Ist and Phase 2nd Balance work thereof) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting in earth work and disposal of excavated earth upto a lead of 20 mtrs in Pick, jumper work as per direction and to the entire satisfaction of Engineer-in-Charge. | 488.56 | Cum | |
| 2 | 2 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. | 2.85 | Cum | |
| 3 | 3 | Excavation in drains and channel etc. in earth work including dressing of sides, beds and disposing of excavated earth upto a lead of 20 mtrs. lift upto 1.50 mtrs. Disposed earth to be levelled and neatly dressed in pick work complete as per direction and entire satisfaction of the Engtineer-in-charge. | 211.9 | Cum | |
| 4 | 4 | Providing and laying cement concrete 1:6:12 (1 cement :6 sand :12 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. | 0.25 | Cum | |
| 5 | 5 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- | |||
| 6 | 5.01 | Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. | 4.64 | Sqmt | |
| 7 | 5.02 | Flat surface such as soffits of suspended floors, roofs,landing and the like floor etc.upto 200mm in thickness as per direction and to the entire satisfactioin of Engineer-in-Charge upto all lead and lifts. | 7.09 | Sqmt | |
| 8 | 5.03 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. | 22.85 | Sqmt | |
| 9 | 6 | Providing and laying cement concrete work 1:2:4( 1 cement :2 sand :4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- | |||
| 10 | 6.01 | Suspended floor roofs, landing, shelves and their supports balconies beams, girders, bressumers and cantilevers upto two level all floor level in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. | 30.69 | Cum | |
| 11 | 7 | Providing and laying cement concrete 1 : 1½ : 3 mix. ( 1 cement : 1½ : sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in : | |||
| 12 | 7.01 | Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. | 8.85 | Cum | |
| 13 | 7.05 | Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | 3.76 | Cum | |
| 14 | 8 | Random rubble masonry/Polygonal rubble masonry ( uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth i/c levelling up with cement conrete 1:6:12 (1cement:6 sand :12 graded stone aggregate 20 mm nominal size ) at plinth level in cement motar 1:6 ( 1cement:6 sand)including curing complete. as per direction and to the entire satisfaction of the Engineer-in- charge in all lead and lifts. | 4.45 | Cum | |
| 15 | 9 | Half brick masonry in common burnt clay Ist class building bricks in super structure above plinth level upto floor two level in cement mortar 1:4 )1 cement :4 sand )including curing complete as per direction and to the entire satisfaction of Engineer-in-Charge upto all lead and lifts. | 1.52 | Sqmt | |
| 16 | 10 | Pointing on brick work with cement motor in 1:3 ( 1 Cement :3 Sand) Flush/Ruled pointing as per direction and to the entire satisfaction of Engineer-in-Charge. | 69.63 | Sqmt | |
| 17 | 11 | Providing and laying brick tiles over mumty roof grouted with cement motor 1:3 (1 cement :3 sand) over a 12mm layer of cement motor 1:3 (1 Cement : 3 Sand) and finished neat over RCC slab (Sloped portion) | 18.81 | Sqmt | |
| 18 | 12 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jump lock jamb, beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamp including steel but things 2.5mm thick with guards, lock strike plate and shock as as specified and applying a coat of approved steal promer after pretrement of the surface as directed by Engineer-in-charge (Profile-B) | 0.52 | Rmt | |
| 19 | 13 | Providing and fixing Panalled , glazed or panelled and glazed shutters for doors, windows and clerestorey windows including black enamelled iron but hinges with necessary screws 40mm thick using 2nd class deodar wood as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift. | 11.99 | Sqmt | |
| 20 | 14 | 6mm Cement plaster to ceiling in cement mortar 1:4 (1 Cement :4 sand)including curing complete as per direction and to the entire satisfaction of Engineer -in-Charge upto all lead and lift. | 6.52 | Sqmt | |
| 21 | 15 | Providing & fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G with wire of dia 0.56 for with necessary screws 40mm thick 2nd class Deodar wood doors windows and clerestory windows including bright finished black enamelled iron hinges as per direction and to the entire satisfaction of Engineer-in-Charge. | 14.34 | Sqmt | |
| 22 | 16 | Making plinth protection 50mm thick in cement concrete 1:3:6 (1 cement :3 sand :6 graded stone aggregate 20mm nominal size including curing complete as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 0.74 | Sqmt | |
| 23 | 17 | Providing and fixing M.S. fan clamp (type-1 of 16mm dia M.S. Bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop all as per standred design complete. | 2 | Nos | |
| 24 | 18 | White washing with lime on undecorated wall surface two coats to give an even shade i/c throughly brooming the surface to remove all dirt, dust, mortar dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 97.53 | Sqmt | |
| 25 | 19 | Distempering with dry distemper of approved brand and manufacture (Two coats) and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth as per direction and to the entire satisfaction of Engineer-in-Charge. | 84.03 | Sqmt | |
| 26 | 20 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 15.55 | Sqmt | |
| 27 | 21 | Providing and fixing aluminium Tower bolts (barrel type) anodized ,transparent or dyed to required colour and shade with screws etc. 200x10mm as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 30 | Nos | |
| 28 | 22 | Providing and fixing aluminium handles 100mm anodized transparent or dyed to required shade with necessary screws as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift. | 20 | Nos | |
| 29 | 23 | Providing and fixing anodyzed aluminium sliding door bolt anodized colour and shade with bolt and nuts screws etc. Complete in all respect 300x16mm as per direction and to the entire satisfaction of Engineer-in-charge upto all lead all lifts. | 2 | Nos | |
| 30 | 24 | Painting two coats excluding priming coat on new steel and other metal surface with enamal paint to give an even shade I/c cleaining the surface of all dirt dust and other foreign matter with enamel paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 23.98 | Sqmt | |
| 31 | 25 | Precast terrazzo tiles 20mm thick with marble chips of specified sizes laid in floors treads of steps and landing on a bed of 25mm average thickness of cement motor 1:6 ( 1 Cement : 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of following shades with in all leads and lifts complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 50.8 | Sqmt | |
| 32 | 26 | Cement concrets flooring 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40 mm thick) as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lift. | 3 | Sqmt | |
| 33 | 27 | Dressing of bed and preparation of sub grade in pick work complete as per direction and to the entire satisfaction of Engineer-in-Charge. | 463.3 | Sqmt | |
| 34 | 28 | Dressing of side slope and preparation of sub grade for lining in pick work complete as per direction and to the entire satiscation of Engineer-in-charge. | 1154.44 | Sqmt | |
| 35 | 29 | Cement concrete lining 15cm thick or less for Irrigation channel using cement concrete 1:3:6 (1 cement :3 sand:6 graded stone agg.20mm nominal size) with hand mixed concretge lining in bed complete as per direction and to the entire satisfaction of Engineer-in-Charge.( i/c curing complete) | 39.04 | Cum | |
| 36 | 30 | Cement concrete lining 15cm thick or less for Irrigation channel using cement concrete 1Cement :3sand :6graded stone aggregate 20mm nominal size) with hand mixed concrete lining on side slope complete as per direction and to the entire satisfaction of Engineer-in-charge( i/c curing complete). | 59.24 | Cum | |
| 37 | 31 | Extra allowances for form work in channel lining on side slope complete as per direction and to the entire satisfaction of Engineer-in-charge. | 59.24 | Cum | |
| 38 | 32 | Providing & fixing of Alfa valve complete as per direction and to the entire satisfaction of Engineer-in-charge. | 6 | Nos | |
| 39 | 33 | Providing & fixing 3mm thick M.S. plate V-Notch 90 degree complete as per direction and to the entire satisfaction of Engineer-in-charge. | 14 | Nos | |
| 40 | 34 | Providing, laying, jointing and testing of Pre-cast concrete socketed and spigotted pipes of following classes with reinforcement duly ISI marked as per IS 458-2003 with rubber rings type-II duly ISI marked as per IS: 5382-1985 complete with latest ammendment as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 41 | 34.01 | 150mm dia NP2 | 568 | Rmt | |
| 42 | 34.02 | 150mm dia P1 | 70 | Rmt | |
| 43 | 34.03 | 150mm dia P2 | 962 | Rmt | |
| 44 | 35 | Laying, jointing & testing of G.I pipe light grade for inlet/out let pipes etc. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 45 | 35.01 | 100mm | 24 | Rmt | |
| 46 | 36 | Laying, jointing and testing in trenches galvanised mild steel tube of light grade screwed and socketed complete including providing and fixing tube fitting such as union, tees, socket etc (excluding cost of bends and valves) for the following dia as per direction and to the entire satisfaction of Engineer-in-charge. (Labaour rate ) | |||
| 47 | 36.01 | 150mm | 470 | Rmt | |
| 48 | 37 | Fixing Brass wheel valve (with hand wheel) as per IS-780 in all leads and lifts. As per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 49 | 37.01 | 100mm | 2 | Nos | |
| 50 | 38 | Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works as per direction of Engineer-in-Charge upto all lead and lift. | 0.47 | Qtl | |
| 51 | 39 | Rising Main:- Excavation in foundation and trenches etc. (for pipe and pits) up to all depth and in all kind of soil such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting in soft / hard rock, chiseling / wedging out of same where blasting is prohibited in all lead and lift including trimming and dressing of side, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering where ever required, stacking the usable and unusable and un-usable materials/soil separately and after laying, jointing and testing of pipes, returning the useful soil trenches in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil/unusable materials as directed with in all leads/lifts including restoration of unmetered/unmetered surfaces to its original conditions and including cost of diversion of traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lift as per direction of Engineer-in-charge. | 460.06 | Cum | |
| 52 | 40 | Raw water Stage :- Providing, laying, jointing and testing in trenches of steel MSERW flanged pipes including cost of flanged bends of all degrees conforming to IS:3589-2001, Grade-330 as per dimensions, weight and test pressure mentioned below in a random length of 4m-7m, The M.S. flanges are to be provided 10% of total joints and remaining 90% joints with butt welded joint as per table below conforming to IS: 6392-1971 (latest up to date amendments) and welding of flanges with pipes as per IS: 816-1965 with a electrode as per IS: 814-1967 including required Nos. and size of M.S. nut and bolts as per IS: 1369-1967 and compressed asbestos fiber jointing gaskets sheet not less than 3mm thick as per IS: 2712-1965. The welding of flanges to be done on both faces in two layers to make the joints leak proof and to the entire satisfaction of the Engineer-in-charge. The laying of pipes should be conformed to IS: 5822-1994 (earth work in trenches, MS flanges and butt welded joint to measured and paid separately) The pipe shall have outside coating as per AWWA specification as per C-233-1978 followed by a flood coat of coaltar approximately 3/32'' thick and rapping hessian cloth completely dipped in coaltar. Inside coating shall be of black bituminous anticorrosive paint over base coat of primer as per AWWA specification C-233-1978 in factory. | |||
| 53 | 40.01 | 250 mm dia MSERW, wall thickness 4.00 mm , flange table 5 (RD 0 to 120 mtrs.) | 120 | Rmt. | |
| 54 | 41 | Providing and welding M.S. flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with up to date amendments) with plain end MSERW pipe in two layers on both faces to make the joint leak proof (The cost of providing and laying of MSERW pipes and butt welded joint to be measured and paid for separately). The welding of flanges should conform to IS: 816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. Including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00mm conforming to IS 2712-1998. The work shall be done to the entire satisfaction of Engineer in Charge with in all leads and lifts. | |||
| 55 | 41.01 | 250 mm dia MSERW, wall thickness 4.00 mm , flange table 5 (RD 0 to 120 mtrs.) | 2 | Nos | |
| 56 | 42 | Providing circumferential butt welded joints by electrical arc welding to MSERW pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | |||
| 57 | 42.01 | Butt welding 250 mm dia MSERW pipes 4.00 mm thick | 18 | No's | |
| 58 | 43 | Phase-Ist:- Laying, jointing and testing in trenches (to level or grade) of pipes jointed with every fifth joint flanged & remaining butt weld joints of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces in two layers to make the joints leak proof and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all | |||
| 59 | 43.01 | 150 mm dia GMS wall thickness 4.80 mm , flange table 17 (54 mtrs.) | 54 | Rmt. | |
| 60 | 43.02 | 150 mm dia GMS wall thickness 4.80 mm , flange table 5 (15 mtrs.) | 15 | Rmt. | |
| 61 | 44 | Providing, welding & fixing of MS flanges at every fifth joint, conforming to following tables as per IS 6392 - 1971 (Latest with upto date amendments) and welding of MS Flanges with GI Pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of GI pipes pipes to be measured and paid for separately).The welding of flanges should conform to IS 816 - 1969 with electrodes as per IS : 814 - 1991 and required number of nuts & bolts conforming to IS : 1364.The thickness of gasket not less than 3.00 mm conforming to IS : 2712 - 1998.The work shall be done as per entire satisfaction of Engineer - in - charge within all leads & lifts. | |||
| 62 | 44.01 | 150 mm dia GMS wall thickness 4.80 mm , flange table 17 (RD 0 to 270 mtrs.) | 5 | No's | |
| 63 | 44.02 | 150 mm dia GMS wall thickness 4.80 mm , flange table 5 (RD 270 to 510 mtrs.) | 4 | No's | |
| 64 | 45 | Phase-II :- Laying, jointing and testing in trenches (to level or grade) of pipes jointed with every fifth joint flanged & remaining butt weld joints of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces in two layers to make the joints leak proof and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all | |||
| 65 | 45.01 | 150 mm dia GMS wall thickness 4.80 mm , flange table 17 (RD 0 to 300 mtrs.) | 300 | Rmt. | |
| 66 | 45.02 | 150 mm dia GMS wall thickness 4.80 mm , flange table 5 (RD 300 to 1020 mtrs.) | 165 | Rmt. | |
| 67 | 46 | Providing, welding & fixing of MS flanges at every fifth joint, conforming to following tables as per IS 6392 - 1971 (Latest with upto date amendments) and welding of MS Flanges with GI Pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of GI pipes pipes to be measured and paid for separately).The welding of flanges should conform to IS 816 - 1969 with electrodes as per IS : 814 - 1991 and required number of nuts & bolts conforming to IS : 1364.The thickness of gasket not less than 3.00 mm conforming to IS : 2712 - 1998.The work shall be done as per entire satisfaction of Engineer - in - charge within all leads & lifts. | |||
| 68 | 46.01 | 150 mm dia GMS wall thickness 4.80 mm , flange table 17 (RD 0 to 300 mtrs.) | 5 | No's | |
| 69 | 46.02 | 150 mm dia GMS wall thickness 4.80 mm , flange table 5 (RD 300 to 1020 mtrs.) | 11 | No's | |
| 70 | 47 | PUMPING MACHINERY (RAW WATER STAGE):- Errecation/testing of Submersible Raw water & allied accessories 1) Pumping sets 2 Nos 5 HP each of KSB make Model KUTTK/UPK-100 210 and its allied accessories complete. The pump shall be directly coulped to a submersible squirrel case electric induction motor of 5 HP Kirloskar/NGEF/Jyoti/Cromption make, D.O.L ATS Starter Roterstrater of MEI/Kilburn/Jyoti/Siemens (2 Nos) 2) fixing of M.S sheet 16 SWG sheet fabricated almirah type panel comprise the following (i) Ammeter AC supply (2Nos) (ii) Voltmeter 100mm square 0-550 volts (1No) (iii) ICTP switches 32Amp. (2Nos) (iv) Busbar Chamber 3 copper bars 32 Amp.(1No)(v) MCB/OCB 32 Amp.(1No) (vi) 3 phase indicating lamp 15 watt.(2Nos) (vii) Earth leakage circuit breaker 63 Amp. (1No) (viii)Hour run meter (2Nos) (ix) Three phase voltage monitor relay (1N0) (x) change over switch32 Amp.Cap. (1No) (xi) single phase preventor (1No) (xii) 3) Fixing of C.I. Sulice valve 100mmPN-I Kirloskar/Kartar/Leader/Bir make (2Nos) 4) Fixing of C.I. reflux valve100mm dia Kirloskar/Kartar/Leader/Bir make (2Nos) 5) Fixing C.I. reflux valve250mm dia class PN-I bye pass arrangement Kirloskar/Kartar/Leader/Bir make (1No) 6) laying of suitable size copperPVC insulated armoured power cable 2.50mm2 =20 mtrs 7) laying jointless flat water proof cableas per BIS 694-1990 4mm2=300 Rmt. from OCB to motor, motor to starter 8) errection of floor / wall mounted power factor capacitor BHEL/GEC/Machneil/Bajaj make & also including LT/LK/Kilburn make ICTP switches (2Nos) 9) fixing of 100mmdia circular dial pressure gauge of 0.11 Kg/cm2 range fiebeg/Bourden/Precision make 2 KVAR each 10) laying delivery pipe considering site requirement,NPSH required and availble 11) Actual laying to be done as per final drawings to be approved by the Engineer-in-charge 1No job 12) Fixing of Antivibration pads conforming to BIS 6337-1971 or latest with upto date ammendments of suitable size for above pumping machinery (2Nos) Any other fitting required as per site conditions & as per directions of Engineer-in-Charge. complete in all leads & lifts | 1 | Job | |
| 71 | 48 | Phase-I :- Errecation/testing of centrifugal pumping sets & allied accessories 1) 2 Nos Pumping sets 20 HP of Horizental spindle, horizental split casing Single/Multistage of standard make such as KSB model WK/WL-50/4 stages conforming to BIS 1520-1980 and its allied accessories complete. The pump shall be directly coulped to a Centrifugle pump case electric induction motor of 20 HP(latest with upto date amamendments) read with BIS 9137-1978 or latest to handle clear water having turbidity 5000 ppm. with impellers, casing ring & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate to Kirloskar/NGEF/Crompton/Siemen/Jyoti slip ring/squirrel cage screen protected drip proof induction electric motor suitable for operation duty point para meters. i) Oil immeresd star Delta Starter of standard make such as MEI/Kilburn/Jyoti/Siemens conforming to BIS: 8544-1979 (2 Nos) 2) The panel will comprise the following items:-M.S. sheet 16 SWG steel fabricated floor mounted closed almirah type switch board including angle Iron post 1 No, Ammeter AC supply,100mm square type Auto AE/L&T/Rishab/Havells/IMP make (2Nos), Voltmeter A.C. Supply, 100mm square type Auto AE/L&T/Rishab/Havells/IMP make of (0-500 V, 1 No) ,ICTP switches with HRC fuses Havells/Standard/L&T/Crompton/Siemens/Kiluurn/Larsen & Turbo 2 Nos, Busbar chamber having 3 copper bars of 100 Amp. rating for full length equal to width of board of 3 live phases 1No, MCB/oil circuit breaker of suitable capacity of L&T/Havells/Standard/MEI/GEC/Kilburn 63 Amp. 1 No,3 Phase indicating lamps (15 Watt) complete with toggle switches for individual motors 15 watt 2 Nos, Earth leakage circuit breaker 100 Amp, Hour run meter of CEE/NEE make 2 No2,Suitable three phase voltage monitor relay 1 No ,Change over switch of Havells/L&T/Crompton make 100 Amp 1No, Single phase preventor of reputed make Suitable for 2x20 HP motor 1 No 3) Fixing of Cast steel sluice valve Kirloskar/Leader/KSB/Pelican make of 50mm dia size ASA-150 pressure of 21 Kg/cm^² 2 Nos, 4) Fixing of cast steel reflux valve Kirloskar/Leader/KSB/Pelican of 50mm dia size ASA-150 pressure of 21 Kg/cm^² 2 Nos, 5) Fixing of Cast steel Reflux valve Kirloskar/Leader/KSB/Pelican of 150mm dia ASA-150 pressure of 21 Kg/cm^² 1 No, 6) Fixing of Cast iron Sluice valve Kirloskar/Leader/Kartar/Bir/KSB of reputed make of 150mm dia cast iron class PN 1, 2Nos 7) Fixing of copper pVC insulated armoured power 3.5 (16mm² ) core cable 1Job, 8) laying 4mm² copper PVC insulated armoured power three core cable 1Job, 9) Laying double loop earthing with copper plate 600x600x3mm thick electrode complete 8SWG 1job, 10) erretion of floor/wall mounted power factor shunt capacitor 2Nos 5 KVAR 11) Fixing of 100mm dia circular dial pressure gauge 2Nos 12) Fixing of pipe arrangement will be 250mm (M)x50mm(H)x150mm(H) dia in suction, delivery and common header 1Job 13) Fixing of Antivibration pads conforming to BIS 6337-1971 or latest with upto date ammendments of suitable size for above machinery 2Nos. Any other fittings as required, as per site conditions & as per directions of Engineer-in-Charge. complete in all leads & lifts | 1 | Job | |
| 72 | 49 | Phase-II :- Errecation/testing of centrifugal Pumping machinary & allied accessories 1) 2 Nos Pumping sets 25 HP of Horizental spindle, horizental split casing Single/Multistage of standard make such as KSB model RKB 50-L14 stages with 25 HP RPM 2900 conforming to BIS 1520-1980 and its allied accessories complete. The pump shall be directly coulped to a Centrifugle pump case electric induction motor of 25 HP(latest with upto date amamendments) read with BIS 9137-1978 or latest to handle clear water having turbidity 50 ppm. with impellers, casing ring & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate to Kirloskar/NGEF/Crompton/Siemen/Jyoti slip ring/squirrel cage screen protected drip proof induction electric motor suitable for operation on duty point parameter:- 2) Oil immeresd star Delta Starter of standard make such as MEI/Kilburn/Jyoti/Siemens conforming to BIS: 8544-1979 (2 Nos) 3) M.S. sheet 16 SWG steel fabricated floor mounted closed almirah type switch board including angle Iron post 1 No, and compries following Ammeter AC supply,60mm square type Auto AE/L&T/Rishab/Havells/IMP make (2Nos), Voltmeter A.C. Supply, 100mm square type Auto AE/L&T/Rishab/Havells/IMP make of (0-500 V, 1 No) ,ICTP switches with HRC fuses Havells/Standard/L&T/Crompton/Siemens/Kiluurn/Larsen & Turbo 63 Amp 2 Nos, Busbar chamber having 3 copper bars of 125 Amp. rating for full length equal to width of board of 3 live phases 1No, MCB of 125 Amp circuit breaker of suitable capacity of L&T/Havells/Standard/MEI/GEC/Kilburn 1 No,3 Phase indicating lamps (15 Watt) complete with toggle switches for individual motors 15 watt 2 Nos, Earth leakage circuit breaker 125 Amp, Hour run meter of CEE/NEE make 2 Nos, Suitable three phase voltage monitor relay 1 No ,Change over switch of Havells/L&T/Crompton make 100 Amp, Single phase preventor of reputed make Suitable for 2x20 HP motor 1 No 4) Fixing of Cast steel sluice valve Kirloskar/Leader/KSB/Pelican make of 50mm dia size ASA-150 pressure of 21 Kg/cm^² 2 Nos, 5) Fixing of cast steel reflux valve Kirloskar/Leader/KSB/Pelican of 50mm dia size ASA-150 pressure of 21 Kg/cm^² 2 Nos, 6) Fixing of Cast steel Reflux valve Kirloskar/Leader/KSB/Pelican of 150mm dia ASA-150 pressure of 21 Kg/cm^² 1 No, 7) Fixing of Cast iron Sluice valve Kirloskar/Leader/Kartar/Bir/KSB of reputed make of 150mm dia cast iron class PN 1, 2Nos 8) Fixing of copper pVC insulated armoured power 3.5 mm² core cable 1Job, 9) laying 4mm² copper PVC insulated armoured power three core cable 1Job, 10) Laying double loop earthing with copper plate 600x600x3mm thick electrode complete 1job, 11) erretion of floor/wall mounted power factor shunt capacitor 2Nos 5 KVAR 12) Fixing of 100mm dia circular dial pressure gauge 2Nos 13) Fixing of pipe arrangement will be 250mm (M)x50mm(H)x150mm(H) dia in suction, delivery and common header 1Job 14) Fixing of Antivibration pads conforming to BIS 6337-1971 or latest with upto date ammendments of suitable size for above machinery 2Nos. Any other fittings as required as per site conditions & as per directions of Engineer-in-Charge. complete in all leads & lifts | 1 | Job |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender