Heavy Industries and Public Enterprises Government Departments Closing in 0 days TDR #22238065

Construction Of School Building At Govt . Sr . Sec . School Randal Distt . Kullu ( Hp ) .

Issued by Government Departments · Randal (Kullu), Himachal Pradesh
Tender Value
12.26 Lakhs
Estimated cost
Bid Submission
13 Nov 2019
0 days left
EMD
24400
Bank guarantee accepted
Document Fee
1400
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Randal (Kullu) → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of School Building At Govt . Sr . Sec . School Randal Distt . Kullu ( Hp ) .

BOQ

Name of Work: Construction of School building at G.S.S.S. Randal Distt. Kullu (HP).
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Cutting in all kind of soil earth work and disposal of excavated earth upto all leads and lifts as per direction of Egineer -in-ChargeBI01010001010000000000000515BI0100001113182Cum
22Excavation in foundation, trenches etc. in earth work in all kind of soil lift upto 1.50 mtr Stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed.BI01010001010000000000000515BI0100001114186.75Cum.
33Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.BI01010001010000000000000515BI01000011209.12Cum.
44.01Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling in all height and removal of the same for in-stureinforced concrete and plain concrete work in:- a) Foundation, footing bases of colums etc. and mass concrete.BI01010001010000000000000515BI010000112173.62Sqm
54.02b) Columns, pillars, post and struts, square, rectangular or polygonal in plain.BI01010001010000000000000515BI010000112234.02Sqm
64.03c) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.BI01010001010000000000000515BI0100001123100.05Sqm
74.04d) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.BI01010001010000000000000515BI010000112462.43Sqm
84.05(e) Vertical Surfaces such as walls.BI01010001010000000000000y515BI010000112590Sqm
95.01Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all hight. a) Foundation footing bases of columns etc. and mass concrete.BI0101000101000000yy0000000515BI010000112523.6Cum.
105.02b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain.BI01010001010000000000000515BI01000011262.98Cum.
115.03c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and cantilever upto floor two level.BI0101000101000000000000660515BI010000112719.18Cum.
126Providing tor steel reinforcement(Fe 415/500 D as per design) for R.C.C. work including bending binding and placing in position complete upto all floor level. Tor Steel.BI0101000101000000000550000515BI010000112854.91Qtl.
137Providing & fixing angle iron door, window, clerestorey window frame manufactured from M.S. Angle iron section of 50 x 50 x 6mm thicness i/c hinges jambs locks & if required angle threshold of MS angle 50 x 25mm welded or rigidly fixed by mechanical means lugs with split & tail to each jamb i/c steel butt hinges 2.5mm thick with provision for locking arrangement & shock absorber specified & applying coat of approved steel primer after proper pretreatment of surfaces as directed by Engineer-In-Charge67866BI01010001010000000000000515BI010000112916.6Rmt.
148Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and embeding in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size).BI01010001010000000000000515BI010000113112Each
159Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd Class Deodar Wood.BI0101000108810000000000000515BI01000011285.04Sqm
1610Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a) 300mm x 16mm.BI0199010001010000000000000515BI01000011292Each
1711Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. a)200x10mm.BI01010001099910000000000000515BI01000011314Each
1812Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete. (a)125mm.BI01010001010000000000000515BI01000011334Each
1913Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height.BI01010001010000000000000515BI010000113416.49Cum.
20146mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand).65546485689.7Sqm
211515mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).BI010100010100003000000000515BI0100001135108.06Sqm
221615mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement :6sand).BI010100010100000000000g00515BI0100001136103.39Sqm
2317Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement.BI0101000101000000000099000515BI01000011375.6Sqm
2418White glazed tile 6mm thick in skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry.23423465475616.2Sqm
2519Precast terrazoo tiles hydraulic compressed 20mm thick with marble chips of specified sizes laid in floors treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6 (1cement: 6sand) jointed with cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing compelete with tiles. Grey shade.BI010310001010000000000000515BI0100001139136.65Sqm
2620Precast terrazoo tiles hydraulic compressed 20mm thick with marble chips of specified sizes in skirting and risers of steps steps not exceeding 30cm in height on 10mm thick cement plaster 1:3 (1cement: 3sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing compelete with tiles. Grey shade.BI010100010100000000000030515BI99010000114016.61Sqm
2721P/F double steel windows side, top hung & fixed glazed & wire gauge of standard rolled steel section joints mitred & welded & manufactured or relevant ISI standard specification with 16 x 3.15mm lugs 10cm long embedded in cement concrete blocks 15 x 10 x 10 cm size in cement concrete 1:3:6 (1cement : 3sand : 6graded crushed stone aggregate 20mm nominal size with wooden steel plugs or screws rawl plug opr with fixing clips or with bolts & nuts as required i/c P/F of projected lugs handles prestaged bolting & fixing 4mm thick glass panes with special metal putty of approved make for glazed windows & wire gauge of IS designation SS 85G with metal beading complete & frame with ISLC 75 x 40mm size mild steel TEE of 20 x 12mm for fixing glass pans,angle size 20 x 20mm & flat size 20mm of Z section & mild steel angle 20 x 12mm or fixed coat of read lead paint & carriage of materials witin all leads & lifts & other incidential complete in all respect as per instruction of Engineer-In-Charge.BI010100010100000000000300515B232I88010000114014.4Sqm
2822Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square bars with round headed bolts and nuts or by screws. Plain grill.4BI0101000101000000000022000515BI088100001140216Kg.
2923Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.65464566.83Cum.
3024Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.54654622.81Sqm.
3125Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.65465.04Sqm.
3226Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint.565465.04Sqm.
3327Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.34534537677.2Sqm.
3428Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint other than white.4654614.4Sqm.
3529Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.234242342301.14Sqm.
3630Distempering (two coats) with oil boud washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth .456546197.76Sqm.
3731Finishing wall with weather proof exterior grade emulsion Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.756756103.39Sqm.
3832Stone soling prperly handpacked filling interstices with kharnja stone complete in all respect.665553453423.68Cum.
3933Providing and fixing Glass panes of sizes 4mm thick3534531.2Sqm.
4034Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 25mm nominal size) and curring complete excluding cost of form work in foundation and plinth in breast and retaining walls etc.53454354103.5Cum.
4135Providing and laying PVC pipes in weep holes. 100mm dia.8967893463470Mtr

AI Tender Summary

OUR REF NO 22238065
AUTHORITY Government Departments
TENDER VALUE 12.26 Lakhs
LAST DATE 13-11-2019
Authority
Authority Name Himachal Pradesh State Industrial Development Corporation Limited
Work Description Construction Of School Building At Govt . Sr . Sec . School Randal Distt . Kullu ( Hp ) .
Basic Detail
Tender No Job No. 7
Bidding Type Tender
Location
City Randal (Kullu)
State Himachal Pradesh
Key Dates
Publish Date 23 Oct 2019
Submission Date 13 Nov 2019
Open Date 14 Nov 2019
Finance
Tender Value 12.26 Lakhs
Tender Fee 1400
EMD 24400
Exemption Not Available
Document List
Agreement.pdf
BOQ_46388.xls
48C1D519-8BFC-4D42-9C74-1E97FD81BB1E.html
specialconditions.pdf
Tendernotice_1.pdf
Scheduledf.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 23, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 13, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 14, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Agreement.pdf

xls

BOQ_46388.xls

html

48C1D519-8BFC-4D42-9C74-1E97FD81BB1E.html

pdf

specialconditions.pdf

pdf

Tendernotice_1.pdf

pdf

Scheduledf.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders