Repairs/Maintenance To Security Lights Alongwith Control Panel , Lt Panels And Feeders In Nishat And Domestic Area And Repair/Maint To Runway Lighting System At 8 Fbsu Af Station Awantipur
Tender Value
16.95 Lakhs
Estimated cost
Bid Submission
04 Nov 2019
0 days left
EMD
33900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (AF) AWANTIPUR → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs / Maintenance To Security Lights Alongwith Control Panel , Lt Panels And Feeders In Nishat And Domestic Area And Repair / Maint To Runway Lighting System At 8 Fbsu Af Station Awantipur
BOQ
| Name of Work: REPAIRS/MAINT TO SECURITY LIGHTS ALONGWITH CONTROL PANEL, LT PANELS AND FEEDERS IN NISHAT AND DOMESTIC AREA AND REPAIR/MAINT TO RUNWAY LIGHTING SYSTEM AT 8 FBSU AF STATION AWANTIPUR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre deep and getting out in any type of soil, complete all as specified and as directed. | 494 | Cubic Metre | |
| 2 | 2 | Sand cushioning to underground cable 8 cm thick layers below the cable and 15 cm thick above the cable in trenches using fine screened river sand, complete all as specified and as directed.\nNote :- Punned thickness shall be measured and paid. | 148 | Cubic Metre | |
| 3 | 3 | Well burnt old size sub class 'B' bricks of nominal size 230X115X075 mm abutting each other for cable protection, complete all as specified and as directed. | 9440 | Each | |
| 4 | 4 | Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, all as specified and as directed. | 301 | Cubic Metre | |
| 5 | 5 | Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point in any type of soil, complete all as specified and as directed. | 193 | Cubic Metre | |
| 6 | 6 | Cutting of bitumen road/PCC road/hard standing for laying of GI pipe and passing of cable including making good to disturbed surface with PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate and matching with existing surface, complete all as specified and as directed. | 12 | Running Metre | |
| 7 | 7 | GI tubing light grade of size 50mm bore for cable protection, laid in trenches, including taking out old unserviceable pipes of any description, complete all as specified and as directed.\n | 12 | Running Metre | |
| 8 | 8 | Taking out old underground serviceable/unserviceable cable of any size and any type and keeping aside for the purpose of rerouting/relaying in new location or for requisite replacement/further disposal including taking out bricks, complete all as specified and as directed.\nNote: Earth work shall be measured and paid separately. | 900 | Running Metre | |
| 9 | 9 | Labour only for re-laying of serviceable cable (as obltained from taking out of cable ) of any type and size includng making all electrical connections, complete all as specified and as directed. | 100 | Running Metre | |
| 10 | 10 | Supply, laying or passing through pipe underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 50Sqmm, 3.5 core including making electrical connections, complete all as specified and directed. | 100 | Running Metre | |
| 11 | 11 | Supply, laying or passing through pipe underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 35Sqmm, 3.5 core including making electrical connections, complete all as specified and as directed. | 200 | Running Metre | |
| 12 | 12 | Supply, laying or passing through pipe underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 25Sqmm, 3.5 core including making electrical connections, complete all as specified and directed. | 200 | Running Metre | |
| 13 | 13 | Supply, laying or passing through pipe underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 10Sqmm, 2 core including making electrical connections, complete all as specified and as directed. | 300 | Running Metre | |
| 14 | 14 | Straight through joints suitable for 70 to 120 Sqmm 3.5 core armoured LT cable 1.1 KV rating, heat shrinkable type, including cutting of faulty cable, complete all as specified and as directed. | 2 | Each | |
| 15 | 15 | Straight through joints suitable for 25 to 50 Sqmm 3.5/4 core armoured LT cable 1.1 KV rating, heat shrinkable type, including cutting of faulty cable, complete all as specified and as directed.\nMake: DENSON/M-SEAL/VENUS/3M. | 4 | Each | |
| 16 | 16 | Painting of steel tubular poles complete with bracket, cable pipe and junction box of approx height 9 Mtrs /8.5 Mtrs long with two coats of aluminium paint after duly preparing the surface by cleaning with scrapers and emrey paper and including 30 cm wide alternate strips (05 Nos of strips) of two colours white & sky blue synthetic enamel paint (Ist quality) including sign writing letters or figures (Pole Number) not exc. 30 cm high, complete all as specified and as directed. | 70 | Each Job | |
| 17 | 17 | Preparation of old painted steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enameled spray painting of approved shade, complete all as specified and as directed. | 60 | Square Metre | |
| 18 | 18 | Replacement of junction box of minimum size 30cm (height) x 30cm (width) x 10cm (depth) made of steel sheet 1.6 mm thick duly painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 4 Nos of capacity 100 Amps with minimum 04 Set of nuts, bolts & washers on each busbar mounted on porcelain/PVC insulator having 01 No MCB, SP, 16 Amps. Junction box shall be fixed on perimeter wall & including suitable anchor fastner, nuts, bolts & washers suitable for bottom entry of cable of size upto 25 sqmm including making electrical connection with & including suitable cable glands, thimbles, complete all as specified and as directed. | 25 | Each | |
| 19 | 19 | Replacement of weather proof control gear boxe 400 watts complete with 400 watt balast, iginitor and capcitor suitable for HPSV/MH lamp 400 W fittings grey powder coated deep drawns CRCA sheet steel box with rubber gasket complete with ballast, ignitors, connector blocks, capacitor, terminals, complete all as specified and as directed.\n Make:- Bajaj/Havells/Crompton | 5 | Each | |
| 20 | 20 | Supply, installation, testing & commisioning in replacement of factory made (CPRI test certified manufacturer) LT feeder pillar box of minimum size 110 cm (Height) x 100 cm (Width) x 50 cm (Depth), outdoor type, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire, 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 300 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3 mm (outer) & 2 mm (inner compartment door) CRCA sheet duly power coated finished and 40x40x6 mm angle iron frame work duly powder coated, panel mounted on angle iron 40x40x6 mm frame having 4 Nos legs 45 cm long of 40x40x6 mm angle iron, 15 mm grouted in PCC of ratio 1:2:4 and 30 cm clear space fron ground level. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size, thimbling and cable entry boxes with cable glands. The scope of the work also includes supply and fixing the following:-\n | 2 | Each | |
| 21 | 20.1 | INCOMING:-\n(a) MCCB 160 Amps, 25 kA rupturing capacity, 4 pole, 415 Volts, 50 Hz, thermal magnetic release type - 01 No. \n(b) Voltmeter digital type 0-500 Volts, flush type with 3 way rotary selector switch -01 No\n(d) Ammeter digital type 0-160 Amps, flush type with 3 way rotary selector switch and 3 Nos CTs of ratio 160/5 Amps - 01 No\n(e) Indicating lamp (LED type) RYB - 01 Set of three.\nOUTGOING:-\n(a) MCCB 100 Amps, 25 kA rupturing capacity, 3 pole, 415 Volts, 50 Hz AC, thermal magnetic release type connected through solid busbar of suitable size in both incoming & outgoing side - 03 Nos. | |||
| 22 | 21 | Replacement of warm white LED street light of rating minimum 100 watt with pressure die cast ousing and toughened glass and individual LEDs confirming IP 66 protaction, complete all as specified and as directed. Make:- Bajaj cat part No. BRTFG 100 W LED WW or equivalent as approved by GE | 20 | Each | |
| 23 | 22 | Replacement of LED street light luminaire in pressure die-cast housing minimum 72 watt, 230 volts, 50 Hz, , IP66 protection including high power LEDs lamp and driver, complete all as specified and as directed.\nMake:- Bajaj cat part No BRTFG72W LED V3 or equivalent to CG/Havells | 25 | Each | |
| 24 | 23 | Replacement of LED street light luminaire in pressure die-cast housing 60 watts, 230 volts, 50 Hz, 5700K, IP66 protection including high power LEDs lamp and driver, complete all as specified and as directed. \nMake:- Bajaj cat part No BRTFG 60 W LED V 3 or equivalent to CG/Havells | 25 | Each | |
| 25 | 24 | Replacement of LED flood light luminaire with high power LED as light source in die-cast housing with IP65 protection 200 watts, 230 volts, 50 Hz including LEDs lamp and driver, complete all as specified and as directed.Make:- Bajaj Cat part No BARFEG 200 W LED or equivalent in Philips/Havells | 7 | Each | |
| 26 | 25 | Replacement of 35 W LED post top light fitting New generation, , energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source lts, 50 Hz including LEDs lamp and driver, complete all as specified and as directed. \nMake:- Havells cat part No LHEVBGP7PN6K040 or equivalent in Bajaj/CG. | 14 | Each | |
| 27 | 26 | Replacement Decorative LED bollards 9 watt complete with LED driver and lamp including diffuser at the upper portion, twin core cable for making connection, complete all as specified and as directed.\nMake:- Bajaj cat part No BGBOM 650 9 W LED or eqvlt in Havells/CG. | 10 | Each | |
| 28 | 27 | Plain cement concrete type B-1 ,1:2:4, using 20 mm graded crushed stone aggregate as in foundation and sides of bollards,poles, pipes and finishing exposed surface without using extra cement, complete all as specified and as directed. | 1 | Cubic Metre | |
| 29 | 28 | Replacement PVC insulated, sheathed, multi stranded, three core, 1100 volts grade copper conductor cable of size 2.5 sqmm, complete all as specified and as directed. \nMake: Finolex/Havells/Plaza. | 400 | Running Metre | |
| 30 | 29 | Replacement Open construction copper ballast suitable for 400 watts, HPSV/MH lamp, 230 Volts, 50 Hz, complete all as specified and as directed.\nMake: Bajaj/Havells/Crompton. | 10 | Each | |
| 31 | 30 | Replacement Open construction copper ballast suitable for 250 watts, HPSV/MH lamp, 230 Volts, 50 Hz, complete all as specified and as directed. \nMake: Bajaj/Havells/Crompton. | 30 | Each | |
| 32 | 31 | Replacement Tubular shaped single ended HPSV/MH lamp 400 watts, 230 Volts, 50 Hz, complete all as specified and as directed. Make: Bajaj/Havells/Crompton. | 15 | Each | |
| 33 | 32 | Replacement Tubular shaped single ended HPSV/MH lamp 250 watts, 230 Volts, 50 Hz, complete all as specified and as directed. Make: Philips/Havells/Crompton. | 50 | Each | |
| 34 | 33 | Replacement Lamp ignitor suitable for HPSV/MH lamp, complete all as specified and as directed. \nMake: Philips/Havells/Crompton. | 15 | Each | |
| 35 | 34 | Replacement Capacitor 33/20 MFD, 230 volts, 50 Hz, complete all as specified and as directed. \nMake: Epcos/Havells/Crompton. | 15 | Each | |
| 36 | 35 | Replacement Lamp holder suitable for 4 x 24 watt street ligh fitting, complete all as specified and as directed. \n Make: As per sample | 20 | Each | |
| 37 | 36 | Replacement T5 high efficiency 24 watt rod suitable 4 x 24 watt street light fitting, complete all as specified and as directed. | 40 | Each | |
| 38 | 37 | Replacement electronic choke 2 x 24 watt suitable 4 x 24 watt street light fitting, complete all as specified and as directed. | 20 | Each | |
| 39 | 38 | Replacement bipin holder suitable 4 x 24 watt street light fitting, complete all as specified and as directed. | 20 | Each | |
| 40 | 39 | Taking out Runway armoured cable of size 6 sqmm 3.3KV and keeping aside for the purpose of rerouting/relaying in new location/for requisite replacement/further disposal complete including taking out bricks, complete all as specified and as directed. \nNote: (i) Earth work shall be measured and paid separately \n(ii) cable to be taking down are for singnal communication having solid joints. special care should be taken to stack the cable. | 1500 | Running Metre | |
| 41 | 40 | Re-Laying of serviceable bricks obtained from taking out of cable perpendicular to the axis of the cable, for protection of cable , complete all as specified and as directed. | 5760 | Each | |
| 42 | 41 | Labour only for relaying, connecting and testing of Runway cable of any size and rating as retrived from serial item No 39 here-in-before, complete all as specified and as directed. | 1500 | Running Metre | |
| 43 | 42 | Labour only for jointing of cable with straight through heat shrinkable joints for runway cables of 6 sqmm copper cable 3.3 KV HT including testing, complete all as specified and as directed. \nNote:-Joints will be provided by Airforce Authority. | 10 | Each | |
| 44 | 43 | Taking out runway lights of any type and refixng in the position as directed including taking out loop connections and refixing of loop connections,complete all as specified and as directed. | 8 | Each Job | |
| 45 | 44 | Note :- An amount of Rs. 13,390.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. |
AI Tender Summary
Tender Timeline
Oct 21, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 06, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender