Military Engineer Services-MES has published Repair/Replacement To Solar Heating System And Connected Allied Work Under Age E/M At Yol Cantt. Submission Date for this Tender is 07-11-2019. Solar Heater Tenders in YOL CANTT Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work :REPAIR/REPLACEMENT TO SOLAR HEATING SYSTEM AND CONNECTED ALLIED WORK UNDER AGE E/M AT YOL CANTT. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART-I Taking down carefully from roof of building and opening of solar collector including dismantling complete and washing and cleaning complete with acid and refixing the same as specified. | 40 | Each Job | |
| 2 | 2 | Supply & filling heat exchanger (Glycol), all as specified. | 40 | Litres | |
| 3 | 3 | Renewal of rubber flange of 25 mm including nut bolts and screw as required at site as specified and directed. | 30 | Each | |
| 4 | 4 | Taking down damaged collector carefully from roof of building and transporting to civil repairing shop for reparing supply and fixing of broken foil sheet solar collector, copper pipe etc, including gas welding/breazing and complete testing complete all as specified. | 40 | Each Job | |
| 5 | 5 | Lagging over 15mm bore GI tubing to avoid heat losses by wrapping all around 25mm thick layer of bonded mineral wool/rock wool of density preformed 'SNAP ON' pipe sections of density 48Kg per cubic metre conforming to IS 9842 duly covered all around with 0.01mm thick aluminium sheet all as specified. | 70 | Running metre | |
| 6 | 6 | Repair to existing angle iron tank stand by welding and shifting to other location, properly grouting in PCC M-15, type B-I using 20 mm graded crushed stone aggregate with necessary excavation and earth work including preparing surfaces of stand and applying one coat of black paint all as specified. | 10 | Each Job | |
| 7 | 7 | Renewal of GI Tee (ISI marked) of size 20 mm , complete all as specified. | 25 | Each | |
| 8 | 8 | Renewal of GI Tee (ISI marked) of size 25 mm , complete all as specified. | 25 | Each | |
| 9 | 9 | Renewal of GI Elbow (ISI marked) of size 20 mm, complete all as specified. | 25 | Each | |
| 10 | 10 | Renewal of GI Elbow (ISI marked) of size 25 mm, complete all as specified. | 25 | Each | |
| 11 | 11 | Renewal of GI Union (ISI marked) of size 20 mm, complete all as specified. | 25 | Each | |
| 12 | 12 | Renewal of GI Union (ISI marked) of size 25 mm, complete all as specified. | 25 | Each | |
| 13 | 13 | Renewal of GI Nipple (ISI marked) of size 20 mm x 150 mm, complete all as specified. | 25 | Each | |
| 14 | 14 | Renewal of GI Nipple (ISI marked) of size 25 mm x 150 mm, complete all as specified. | 20 | Each | |
| 15 | 15 | Renewal of GI Nipple (ISI marked) of size 20 mm x 100 mm, complete all as specified. | 25 | Each | |
| 16 | 16 | Renewal of GI Nipple (ISI marked) of size 20 mm x 50 mm, complete all as specified. | 25 | Each | |
| 17 | 17 | Renewal of GI Nipple (ISI marked) of size 25 mm x 50 mm, complete all as specified. | 25 | Each | |
| 18 | 18 | Renewal of GI Tank Nipple (ISI marked) of size 20 mm, complete all as specified. | 25 | Each | |
| 19 | 19 | Renewal of GI Tank Nipple (ISI marked) of size15 mm, complete all as specified. | 25 | Each | |
| 20 | 20 | Renewal of brass flange (ISI marked) of size 25mm dia, complete all as specified | 25 | Each | |
| 21 | 21 | Renewal of Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore and fixed complete, all as specified. | 10 | Each | |
| 22 | 22 | Renewal of Ball valves high pressure of PTMT of size 25mm bore with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, (Min weight 455 gms) complete all as specifed and directed by Engr -in- Charge. \n | 10 | Each | |
| 23 | 23 | Renewal of Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed, all as specified. | 10 | Each | |
| 24 | 24 | Mild steel galvanised iron water tubing in replacement of 25mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed. | 120 | Running metre | |
| 25 | 25 | Mild steel galvanised iron water tubing in replacement of 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor complete, all as specified and directed. | 90 | Running metre | |
| 26 | 26 | Plain cement concrete M-10, nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, sunken floor, all as specified. | 2 | Cubic Metre | |
| 27 | 27 | Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylinderical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/PVC storage tank, all as specified. | 5 | cum | |
| 28 | 28 | Toughened glass, 6mm thick, of size 1.83 metres x 1.22 metres, hose pipe and clamps as required at site including taking out old damaged glass, complete all as specified. | 10 | Each | |
| 29 | 29 | Opening dismantling and taking down of hot water tank of capacity 500LPD for repair to damaged hot water tank with Argon welding complete testing including replacement of PUF glass wool of damaged parts, cutting breaking, welding, breezing of new sheet of suitable size of tank and ensuring the testing in accordance with IS coded IS-12976, complete all as specified. | 10 | Each Job | |
| 30 | 30 | Opening dismantling and taking down of hot water tank of capacity 300LPD for repair to damaged hot water tank with Argon welding complete testing including replacement of PUF glass wool of damaged parts, cutting breaking, welding, breezing of new sheet of suitable size of tank and ensuring the testing in accordance with IS coded IS-12976, complete all as specified. | 10 | Each Job | |
| 31 | 31 | Opening dismantling and taking down of hot water tank of capacity 200LPD for repair to damaged hot water tank with Argon welding complete testing including replacement of PUF glass wool of damaged parts, cutting breaking, welding, breezing of new sheet of suitable size of tank and ensuring the testing in accordance with IS coded IS-12976, complete all as specified. | 2 | Each Job | |
| 32 | 32 | Opening dismantling and taking down of hot water tank of capacity 100LPD for repair to damaged hot water tank with Argon welding complete testing including replacement of PUF glass wool of damaged parts, cutting breaking, welding, breezing of new sheet of suitable size of tank and ensuring the testing in accordance with IS coded IS-12976, complete all as specified. | 4 | Each Job | |
| 33 | 33 | Renewal of Geyser elements of capacity 03 KW with gasket all as specified. | 15 | Each | |
| 34 | 34 | Renewal of Geyser elements of capacity 05 KW with gasket all as specified. | 10 | Each | |
| 35 | 35 | Renewal of thermostat of capacity 0 to 900 for upto 5 KW element including taking down old unserviceable thermostat of any capacity, all as specified. | 25 | Each | |
| 36 | 36 | Taking down old unserviceable/ defective solar security light fitting any type for repair and replacing of brunt/ worn out accessories/ parts and refixing on its original place and testing complete all as specified guideline of MNRE.\nNote : (a) Accessories/ parts shall be measured and paid separately under relevant items as "Supply Only".\n(b) Labour charges for fixing shall deemed to be included in unit rate quoted.\n\n\n | 5 | Each Job | |
| 37 | 37 | (i) Supply only CFL lamp 11 Watts, pin type complete all as specified.\n\n | 5 | Each | |
| 38 | 38 | (ii) Supply only Distilled water for batteries complete all as specified.\n | 20 | Ltrs | |
| 39 | 39 | (iii) Supply only Battery terminals set complete all as specified.\n | 10 | Each set | |
| 40 | 40 | (iv) Supply only Batteries, 12 Volts, 40/50 AH, maintenance free with three years warranty complete all as specified.\n | 5 | Each | |
| 41 | 41 | (v) Supply only Charger with PCB controller complete all as specified.\n | 2 | Each | |
| 42 | 42 | Heavy duty Anti traffic light fittings complete with LED lights, blinkers and frame suitable for working 24 hours, seven days complete including taking down old unserviceable all as specified.\nMake :as per existing make Electro Expo System or Equivalent Techno Commercial as approved by GE | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
