Faciltation Of New Building For Chirayinkeezhu Block Panchayath Building Completion Works
Tender Value
22.31 Lakhs
Estimated cost
Bid Submission
25 Oct 2019
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2975
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chirayinkeezhu → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Faciltation Of New Building For Chirayinkeezhu Block Panchayath Building Completion Works
BOQ
| Work Name: Proj. No.66/20 Chirayinkeezhu Block Panchayath : -FACILTATION OF NEW BUILDING FOR CHIRAYINKEEZHU BLOCK PANCHAYATH | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Appendix A-Buiding esimate | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 26.22.1 : Providing and fixing false ceiling at all heights with integral densified calcium\nsilicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595\nmm of approved texture, design and patterns having NRC (Noise Reduction\ncoefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%\n(minimum). Non combustible as per BS:476 (part-4), fire performance as per\nBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043\nW/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking\nmetal T-Grid of hot dipped galvanised iron section of 0.33mm thick\n(galvanized @ 120 grams per sqm including both sides) comprising of main-\nT runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of\nlength 1200 mm and secondary intermediate cross-T of size 24x32 mm of\nlength 600mm to form grid module of size 600 x 600 mm, suspended from\nceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)\ni.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully\nthreaded hanger rod upto 1000 mm length and L-shape level adjuster of size\n85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm\nof length 3000 mm to be fixed on periphery wall / partition with the help of\nplastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S\nscrews. The work shall be carried out as per specifications, drawing and as\nper directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. | BI01010001010000000000000515BI0100001114 | 222.05 | sqm |
| 3 | 1.002 | 26.24.1 : Providing and fixing in position wall panelling at all heights with integral\ndensified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise\nReduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance\nof 85% (minimum). Non combustible as per BS:476 (part-4), fire performance\nas per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <\n0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially\nfabricated galvanised mild steel sheet 0.50 mm thick pressed section\n(galvanizing @120 grams per sqm including both sides) i.e.vertical studs of\nsize 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling\nchannel section of size 50 x 32m fixed to the floor and soffit at 600mm centers\nusing 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with\n10mm bolt. This same channel is then to be fixed in horiziontal direction at\n600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of\n50mm thickness is then to be inserted in the slots and finally calcium silicate\nnon combustible panels/tiles are to be screw fixed with self tapping pan head\nnickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an\neven groove of 1 mm between the panels. The joints between the panels are to\nbe duly jointed and finished using recommended jointing calcium silicate based\ncompound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of\nprimer suitable for panelling as per manufacturer's specification as per\ndirection of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicatepanels/ tiles | BI01010001010000000000000515BI0100001115 | 271.104 | sqm |
| 4 | 1.003 | od290889/2019_2020 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.<br>Hot finished welded type tubes | BI01010001010000000000000515BI0100001116 | 193.905 | sqm |
| 5 | 1.004 | 25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. | BI01010001010000000000000515BI0100001117 | 106.905 | sqm |
| 6 | 1.005 | od292380/2019_2020 : Supplying and fixing granite name board 75*60 cm size on brick wall with engraving letters as per the direction Dept Enginieers | BI01010001010000000000000515BI0100001118 | 1 | each |
| 7 | 2 | Electrification(Rs.2,00000/-) | BI01010001010000000000000515BI0100001119 | 1 | each |
AI Tender Summary
Tender Timeline
Oct 17, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 30, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender