Renovation Of Kitchen And Bathroom , Replacement Of Damaged Door Aluminum Work In Almari , Window
Tender Value
3.46 Lakhs
Estimated cost
Bid Submission
25 Oct 2019
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
34600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Kitchen And Bathroom , Replacement Of Damaged Door Aluminum Work In Almari , Window
BOQ
| Name of Work 4216 Jeernodhar sudharikaran ke antergat Vidhayak Niwas-4, Royal hotel stith awas no-3 me kitchen avem bathroom ka navinikaran avem shatigrast darwaza badalne tatha almari avem khidkiyon me aluminium ka karya | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling existing plaster & racking out joints of brick work including disposal of refuse as directed by the E/I. | 117.65 | sqm | |
| 2 | 2 | Providing and laying Ceramic glazed floor rectified floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Premium quality conforming to IS : 15622, of approved make, in all colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white and matching pigment etc., complete. (Kajaria/Johnson/ RAK) | 13.79 | sqm | |
| 3 | 3 | Providing and fixing 1st quality ceramic glazed wall tiles (bell/kajaria/somany)conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, non rectified ordinary tile, (size of Tile 300x450mm) | 117.65 | sqm | |
| 4 | 4 | 12 mm Cement plaster with( 1 :4 )cement and coarse sand including all labour material. | 82.81 | sqm | |
| 5 | 5 | Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. | 11.7 | sqm | |
| 6 | 6 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 30.36 | sqm | |
| 7 | 7 | Distempring with oil bound distemper 2 coat with primer coat on previously surface including all labour material. | 292 | sqm | |
| 8 | 8 | Painting 2 coat with super synthetic enamel paint with primer coat including all labour material. | 32.2 | sqm | |
| 9 | 9 | Supply and fixing of steel kitchen sink 610X510X200 mm without drain board.withC.P.jali, P.V.C. wastepipe,bracket,including supply of all material, labour, T&P etc. for proper completion of work. | 1 | no | |
| 10 | 10 | Supply and fixing of P.V.C low level cistern with all internal fittings, M.S. Bracket, P.V.C. Connection, C.P. angle valve 15mm dia, brass ball cock complete including suplly of all material, labour, T&P etc. required for proper completion of the work. | 2 | no | |
| 11 | 11 | Providing and fixing white vitreous (European type-W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid | 1 | no | |
| 12 | 12 | Supply and fixing of white glazed earthen ware wash hand basin with C.P. jail, PVC waste pipe, pillar cock, bracket, etc complete including upply of all materials, Labour, T&P etc. required for proper completion of the work(550×400mm size) | 1 | no | |
| 13 | 13 | Providing and fixing Aluminum work for doors windows, ventilators and partitions with struts built up standard tubular section appropriate Z section and other section of approved mark conforming to IS : 733 & IS : 1285 fixed with rawl plug and screws or with fixing clip or with expansion hold fastner including necessary filling of gap and junction at top bottom and sides with required PVC /neoprene felt etc . Aluminum section shall be smooth rust free straight miter and jointed mechanically where ever required including cleats, angles, aluminum snap beading for glazing / paneling C. P. Brass stainless stellecrews all completed as per architectural drawing and as per direction of engineer incharge. ( Glazing and paneling to be paid for separately ) | 205.68 | kg | |
| 14 | 14 | Supply and fixing C.P. Hand Shower (Health Faucet) with 8mm Dia 1.00 mtr. Long Flexible tube & wall huke (L & K make] including supply of all material, labour T&P etc. complete. | 1 | no | |
| 15 | 15 | Providing and fixing Nahani trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet Sand Cast Iron S&S as per IS: 1729 (100×75 Nahani, Trap 4 kg) | 3 | no | |
| 16 | 16 | Providing and fixing 600x450 mm size with bevelied edge mirror of superior glass ( of approved quality) complete with 6mm thick hard board ground fixed with rawal plug with iron screws and washers complete. | 2 | no | |
| 17 | 17 | Providing and fixing C.P. Brass Bib cock 15 mm dia( L&K make) with wall flange including supply of all material, labour T&P etc. complete. | 4 | no | |
| 18 | 18 | Providing and fixing Curtain rod 20 mm including its rings. brackets and fancy balls at ends complete. | 24.2 | rmt | |
| 19 | 19 | Providing and fixing HCI pipe HEP make pipe: 100 mm dia including of all materials, labour and T&P etc. required for proper completion of the work. As per IS. | 7.2 | rmt | |
| 20 | 20 | P/F GI Pipes complete with GI Fitting and clamps including making good the wall etc concealed pipes cutting chases and making good the wall 15mm dia nominal bore. | 8.5 | rmt | |
| 21 | 21 | Providing and fixing 2 way bib cock of approved quality with wall flange including supply of all material labour T& P etc complete. | 1 | no | |
| 22 | 22 | Providing and fixing CP Brass concealed stop cock ( l& k equilevent make) for basin mixture and geasure point of approved quality 15mm nominal bore. | 3 | no | |
| 23 | 23 | Providing and fixing C.P. Brass soap dish, jaquar, ESSCO, cera, hindware including supply of all material, labour . | 2 | no | |
| 24 | 24 | Providing and fixing C.P. Brass towel rail 750×20mm together with pair of C.P. Brass bracket to the fit of towel rail including all labour material. | 2 | no | |
| 25 | 25 | Providing and fixing C.P. Angle wall 15mm dia ( L&K, Jaguar, ESSCO or equivalent) including all labour material. | 4 | no | |
| 26 | 26 | Providing and fixing Indian type glazed earthen ware W.C pan of approved quality size 580mm Orrisa pattern (Jaguar, ESSCO, cera, hindware) etc. including labour and T&P required for the proper completion of the work including removal of old pan etc if so required. | 1 | no | |
| 27 | 27 | Providing and fixing 4 mm thick ACP Sheet in panneling in fixed alluminium door window shutter and partition frame with CP brass/ss screw ec complete as per architectural drawing excluding the cost of snap beading and EPDM gasket Rubber as per direction fo E/I. | 15.98 | sqm | |
| 28 | 28 | Providing and fixing of glazing in Aluminium door/window, Ventilator shutter and Partitions etc, with EPDM Rubber/ neoprene gasket etc, complete as per the architectural drawings and the direction fo E/I (Cost of aluminium snap beading shall be paid in basic item with Plain Glass Panes of 6 mm thickness. | 9.74 | sqm | |
| 29 | 29 | Providing and fixing Black granite (polished) in big slab 18(+/-2) mm thick saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm | 1.4 | sqm |
AI Tender Summary
Tender Timeline
Oct 17, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender