Road Transport and Highways Government Departments Closing in 0 days TDR #22152141

Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I Total Length -10 . 225 Km Ut 03-23 Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I , Total Length -10 . 225 Km

Issued by Government Departments · Pokhari, Uttarakhand
Tender Value
5.38 Crore
Estimated cost
Bid Submission
07 Nov 2019
0 days left
EMD
10.77 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Pokhari → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I Total Length -10 . 225 Km Ut 03-23 Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I , Total Length -10 . 225 Km

BOQ

Name of Work: Construction of Kalsir to Nail-Nauli-Gudam ( Stage-I) Motor Road in Length of 10.225 Km under PMGSY
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Earth work in hill road (hill side cutting):- Excavation in hilly area for construction of road in all types of soils & rocks as met at site , true to lines as per plan, L section , camber, super elevation as required , also including uprooting & cutting of bushes, dressing of road surface to the required level and slopes, with all lead, lift and safe disposal of surplus excavated material at suitable dumping places by mechanical means/ manual means as directed by Engineer in charge without damaging forest , forest land , utility and private properties ,including slip clearance during hill side cutting as directed by Engineer-in-charge and as per MORD specifications clause 1600item 11LS Job
23Removal of landslide (Slip clearance) in all types of soil and rock by mechanical means/ manual means and disposal of safe side only in after completion of hill side cutting as per road design as directed by Engineer in charge and MORD specification, clause 1611(Slip clearance considered only those reaches where the Hill side cutting has been completed and handed over to Engineer in charge)item 316077.9cum
34Excavation for Structures: - Earth work in Excavation foundation for cross drainage structures, retaining walls, breast walls & other similar structures in all types of soils and rocks as met at site with all leads, lifts and disposal of surplus earth as directed by engineer in charge including supply of all material labour, T&P etc. required for proper completion of work in accordance with the MORD specification.item 48495.97Cum
45Random Rubble Stone Masonry laid in 1:5 cement and sand mortar by locally available approved stone and sand from approved querry, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.(As per PWD Uttarakhand specifications)item 52409.82Cum
56Random Rubble stone masonry for structure laid dry by locally available approved stone and sand from approved querry including supply of all materials, labour, T&P etc required for proper completion of work as per drawing & as per MORD specification for retaining walls, breast walls & other similar structures as directed by Engineer-in-Charge.item 64404.85cum
67Providing & laying filter media as Hand packed stone filling in the back of retaining walls, abutments, wing walls etc. by locally available approved stone including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge.item 7933.5Cum
78Providing edge stones on valley side of formation as directed by Engineer-in-charge and MoRD Specification Clause 1608.4item 810225mtr
89Providing and laying of boulder apron laid in wire crates with 4 mm dia G.I. Wire conforming to IS: 280 & IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification of MORD and as directed by Engineer in charge.item 9496.88Cum
910Construction of parapet in RR stone masonry laid in 1:5, C/S mortar providing M10 cement concrete in top, plaster in 1:4 C/S mortar & flush pointing in 1:3 C/S mortar as required and specified in detailed drawing with white washing complete as per the direction of Engineer in charge.( witht base CC M10 )item 10260Rmt.
1011Construction of hill side Pucca drains as per drawing including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.item 111000Rmt.
1112Construction of hill side KUCCHA drainsIn according with the requirment of specfication true to line and grades. required for proper completion of the work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.`item 128493Rmt.
1213Granular sab-bas /base /surface course with lacal materials by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared sueface,mixing by mix in place mothod with smooth wheeled roller to achieve the desired density complete as per clause 401.4 and as per technical specification clause 408.SI No 4.11 (1)(ii)item 133497.86Cum
1314Construction of pucca scupper including catch pit including supply of all materials, labour, T&P etc required for proper completion of work as per drawing mord specification as directed by Engineer-in-Chargewith catchpititem 14335Rmt.
1415Construction of Dry scupper including catch pit including supply of all materials, labour, T&P etc required for proper completion of work as per drawing mord specification as directed by Engineer-in-Charge with catchpit.item 1650Rmt.
1516Providing & laying M10 grade plain cement concrete in open foundation asper MORD material labour specification including all material labour T&P etc. as directed by Engineer in charge.(for causeway)item 1772.8Cum
1617Providing & laying RCC M25 grade plain cement concrete in open foundation asper MORD material labour specification including all material labour T&P etc. as directed by Engineer in charge.(for causeway)item 1836.4Cum
1718providing and fixing 5 Kilometer stone as per standard drawing made of Precast R.C.C. M15 grade fixed with pcc M10 grade .including excavation of pit, painting and printing letters on kilometer stone with two coat of synthetic enamel paint of approved quality as directed by engineer in charge.item 192Nos
1819providing and fixing per Kilometer stone as per standard drawing made of Precast R.C.C. M15 grade fixed with pcc M10 grade .including excavation of pit, painting and printing letters on kilometer stone with two coat of synthetic enamel paint of approved quality as directed by engineer in charge.item 2011Nos
1920providing and fixing of hectometer stone as per standard drawing made of Precast R.C.C. M15 grade fixed with pcc M10 grade .including excavation of pit, painting and printing letters on kilometer stone with two coat of synthetic enamel paint of approved quality as directed by engineer in charge.item 2141Nos
2021Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and written as per the MORD specification and direction given by Engineer in charge.item 221Nos
2122Providing & fixing of semi reflective traffic sign board (cautionary mandatory & informatory) as per attached drawing dully painted and written as per the mord specification and as direted by Engineer in chargeitem 23100Nos
2223Providing fixing of PMGSY Logo board at suitable place in the starting of the road as per attached standard drawing duly painted and written as per the MORD specification and direction given by Engineer in charge.item 247Nos
2324Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.item 253Nos
2425Providing & fixing of semi reflective Direction and place identification sign board up to 0.90sqm as per attached standard drawing dully painted and written as per the MORD specificationitem 269Sqm
2526Construction ofreference pillar (totally under ground) of length km 200mm, width 200mm and height 300mm) as per 1600.1 (b) and Technical specification clause 1602.3 of MORD specifications for rural roadsitem 27409Nos
2627Construction of back pillrs, of length 300mm,width 300mm and km height 400mm of which 100mm shall be below ground level as per Fig. 1600.1 (b) and Technical specification clause 1602.3 of MORD specifications for rural roadsitem 28409Nos
2728Construction of job pillar of length 400mm,width 400mm and km height 600mm of which 100mm shall be below ground level as per Fig.1600.1 (d) and Technical specification clause 1602.4 of MORD specifications for rural roads.item 292Nos
2829EMMERGENCY MAINTENANCEitem 30
2930Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611item 31
3030.1Ist Yearitem 32818cum
3130.2Iind Yearitem 33736.2cum
3231Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, and all other charges required for proper compeletion of workitem 34
3331.1Ist Yearitem 3540.9hours
3431.2Iind Yearitem 3636.81hours
3532Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301item 37
3632.1Ist Yearitem 3830.675cum
3732.2Iind Yearitem 3927.608cum
3833Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only)item 40
3933.1Ist Yearitem 4140.9cum
4033.2Iind Yearitem 4236.81cum
4134Routine Maintenance Under PBMC:item 117
4235Maintenance under PBMC for \n1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. \n2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907.\n3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 .\n4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908.\n5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909.item 119
43366] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910.\n7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912.\n8] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.item 120
4436.1Ist Yearitem 12110.225Km
4536.2Iind Yearitem 12210.225Km

AI Tender Summary

OUR REF NO 22152141
AUTHORITY Government Departments
TENDER VALUE 5.38 Crore
LAST DATE 07-11-2019
Authority
Authority Name Pradhan Mantri Gram Sadak Yojana
Work Description Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I Total Length -10 . 225 Km Ut 03-23 Construction And Maintenance Of Kalsir To Godam-Nail-Nauli-Kunji Motor Road Stage-I , Total Length -10 . 225 Km
Basic Detail
Tender No UT0323
Bidding Type Rate Contract
Location
City Pokhari
State Uttarakhand
Key Dates
Publish Date 16 Oct 2019
Submission Date 07 Nov 2019
Open Date 07 Nov 2019
Finance
Tender Value 5.38 Crore
Tender Fee 5000
EMD 10.77 Lakhs
Exemption Not Available
Document List
9F7ADFF9-8B23-4BAD-BB05-A9E3219A450C.html
Tendernotice_1.pdf
BOQ_148136.xls
323SBD.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 16, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 07, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 07, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

9F7ADFF9-8B23-4BAD-BB05-A9E3219A450C.html

pdf

Tendernotice_1.pdf

xls

BOQ_148136.xls

pdf

323SBD.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders