Military Engineer Services-MES has published Repair Maintenance Of Rusted Ci Gi Di Pipe Line Pump Motor Cleaning Of Rcc Tank And Allied Works At Sdo Muzaffarpur Under Ge Danapur Cantt. Submission Date for this Tender is 04-11-2019. Motor Work Tenders in MUZAFFARPUR Bihar. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR /MAIN OF RUSTED CI/GI PIPR LINE ,PUMP, MOTER, CLEANING OF RCC TANK AND ALLIED WORKS AT MUZAFFER PUR UNDER GE DANAPUR CANTT . | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking out submersible pump of 20 HP capacity including motor from bore well by disconnecting all electric / water connections dismantling of motor and pump for repair including transportation from work site to workshop and back, lowering of pump set, connecting and testing complete all as specified and directed. | BI01010001010000000000000515BI0100001113 | 3 | Each Job |
2 | 2 | M&L for opening of submersible motor of 20 HP capacity and taking out the rotor from the body and cutting the burnt coils / winding, cleaning the starter slots properly by using cleaning material and re-winding / reassembling the same including replacement of parts/components complete including cleaning, scraping out old rubbed paint / rust & appling two coat of rubber synthetic paint (first class) by spray painting machine over a coat of primer of any capacity of motor complete all as specified and directed.\nNote:- Replacement of parts / components shall be measured and paid separately under respective item of Schedule 'A' as supply only. | 2 | Each Job | |
3 | 3 | Overhauling of 20 HP submersible pump set of Pump House by dismantling each part cleaning properly, oiling greasing with replacing bearing, bushes, oil seal, gland packing set and reassembling of pump set all as specified and directed as per existing size and making connection with proper size of lugs, nuts bolts including cleaning , scraping out old rubbed paint / rust & applying two coat of rubber synthetic paint ( first class ) by spray painting machine over a coat of primer commissioning and testing complete all as specified and directed. | 1 | Each Job | |
4 | 4 | Taking out submersible pump of 12.5 HP capacity including motor from bore well by disconnecting all electric / water connections dismantling of motor and pump for repair including transportation from work site to workshop and back, lowering of pump set, connecting and testing complete all as specified and directed. | 1 | Each Job | |
5 | 5 | M&L for opening of submersible motor of 12.5 HP capacity and taking out the rotor from the body and cutting the burnt coils / winding, cleaning the starter slots properly by using cleaning material and re-winding / reassembling the same including replacement of parts/components complete including cleaning, scraping out old rubbed paint / rust & appling two coat of rubber synthetic paint (first class) by spray painting machine over a coat of primer of any capacity of motor complete all as specified and directed.\nNote:- Replacement of parts / components shall be measured and paid separately under respective item of Schedule 'A' as supply only. | 1 | Each Job | |
6 | 6 | Overhauling of 12.5 HP submersible motor of pump set of filtration plant by dismantling each part cleaning properly, oiling greasing with replacing bearing, bushes, oil seal, gland packing set and reassembling of pump set all as specified and directed as per existing size and making connection with proper size of lugs, nuts bolts including cleaning , scraping out old rubbed paint / rust & applying two coat of rubber synthetic paint ( first class ) by spray painting machine over a coat of primer commissioning and testing complete all as specified and directed. | 1 | Each \nJob | |
7 | 7 | M&L for Lath work including all materials as required for the following items/components of motor of 20 HP capacity complete as under :-\n(a) Making the strip on rotor including pressing the core of rotor and polishing the shaft.\n(b) Making the proper size of motor cover (housing) including welding etc.\n(c) Re-metaling of thrust plate and replacement of ebonite sheets complete. | 3 | Each \nJob | |
8 | 8 | M&L for lath work including all materials as required for re-metaling of impellers, polishing, turning of pump shaft, welding, facing of impellers of submersible pumps capacity 20 HP complete all as specified and directed. | 2 | Each \nJob | |
9 | 9 | Supply only Gun metal neck ring as per sample complete all as specified and directed. | 3 | Each | |
10 | 10 | Supply only Top gun metal bush as per sample complete all as specified and directed. | 9 | Each | |
11 | 11 | Supply only Gun metal sockets as per sample complete all as specified and directed. | 6 | Each | |
12 | 12 | Supply only Gun metal body housing bush as per sample complete all as specified and directed. | 6 | Each | |
13 | 13 | Supply only steel guide bush as per sample complete all as specified and directed. | 3 | Each | |
14 | 14 | Supply only nuts, bolts and washers complete as per sample complete all as specified and directed. | 10 | Each | |
15 | 15 | Supply only Gun metal bushes for top cover of motor as per sample complete all as specified and directed. | 3 | Each | |
16 | 16 | Supply only Gun metal bushes for bottom cover of motor as per sample complete all as specified and directed. | 4 | Each | |
17 | 17 | Supply only mild steel stud bolts and washers suitable for 20 HP motor as per sample complete all as specified and directed. | 90 | Each | |
18 | 18 | S & F in repair GI wire 4 mm dia or existing size for support / fixing of pump assembly by binding and archeries on the top of bore well complete all as specified and directed. | 7 | Kg | |
19 | 19 | M&L for prepration of old surfaces of steel/iron of any description over 10 cm in width or girth not otherwise described and applying two coat of Aluminium paint over a coat of red oxide primer complete all as specified and directed . | 30 | Sqm | |
20 | 20 | M&L for draining out existing water from RCC OH tank of capacity 20000 gallons of 18 to 21 feet and staging after scraping, cleaning inside surfaces with steel brush, removing the sediment ring material accumulated at the bottom of the tank, cleaning throughly the inside surfaces with bleaching powder and wash the same with clean water and applying one coat of cement base paint @ 0.30 Kg per sqm and marking the date of cleaning with synthetic enamel paint on external surface including two coats of synthetic enamel paint on all pipes of different sizes such as rising main, delivery pipe, over flow pipe & wash out pipe etc. as per colour code complete all as directed. | 1 | Each Job | |
21 | 21 | Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe in soft / loose type of soil and getting out complete all as specified | 80 | Cum | |
22 | 22 | Returning filling in, including spreading, leveling watering & well ramming in layers not exc 25cm thick complete all as specified and directed by EIC | 72 | Cum | |
23 | 23 | Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed. | 8 | Cum | |
24 | 24 | Taking up or down steel water tubing and connections of the following sizes:-( Note:- Excavation and earth work shall be measured and paid for seperately) | |||
25 | 24.01 | (a) 80 mm bore. | 80 | RM | |
26 | 24.02 | (b) 50 mm bore | 88 | RM | |
27 | 24.03 | (c) 40 mm bore | 68 | RM | |
28 | 24.04 | (d) 25 mm bore | 56 | RM | |
29 | 24.05 | (e) 20 mm bore | 227 | RM | |
30 | 24.06 | (f) 15 mm bore | 177 | RM | |
31 | 25 | Refixing only GI steel tubing and connections in new or old position including cleaning internally and externally, any grade / make in trenches / wall / floor / ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of following size:- | |||
32 | 25.01 | (a) 50 mm bore | 18 | RM | |
33 | 25.02 | (b) 40 mm bore | 18 | RM | |
34 | 25.03 | (c) 25 mm bore | 18 | RM | |
35 | 25.04 | (d) 20 mm bore | 27 | RM | |
36 | 25.05 | (e) 15 mm bore | 27 | RM | |
37 | 26 | M&L for GI Pipe medium grade with all necessary fittings such as bend, elbow, socket, tee, Union, Reducer socket etc laid in trenchs including making connection to existing GI tubing complete all as specified and directed for the following sizes :- | |||
38 | 26.01 | (a) 80 mm bore. | 80 | RM | |
39 | 26.02 | (b) 50 mm bore | 70 | RM | |
40 | 26.03 | (c) 40 mm bore | 50 | RM | |
41 | 26.04 | (d) 25 mm bore | 38 | RM | |
42 | 26.05 | (e) 20 mm bore | 200 | RM | |
43 | 26.06 | (f) 15 mm bore | 150 | RM | |
44 | 27 | S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixeding for following size:- | |||
45 | 27.01 | (a) 50 mm bore | 5 | Each | |
46 | 27.02 | (b) 40 mm bore | 4 | Each | |
47 | 27.03 | (c) 25 mm bore | 8 | Each | |
48 | 27.04 | (d) 20 mm bore | 10 | Each | |
49 | 27.05 | (e) 15 mm bore | 10 | Each | |
50 | 28 | S&F 25 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed by EIC. | 8 | Each | |
51 | 29 | S&F 20 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed by EIC. | 10 | Each | |
52 | 30 | Taking out CI/DI pipe any type including fittings with spigot and socketed end centrifugally cast laid in trenches including removing of lead following sizes :- | |||
53 | 30.01 | 100 mm bore | 72 | RM | |
54 | 30.2 | 150 mm bore | 102 | RM | |
55 | 31 | Refixing CI pipe of any type laid in trenches after cleaning internally and externally, drawing out forrigen material/rust complete up to satisfaction of Engr in Charge of following sizes :- | |||
56 | 31.01 | 100 mm bore | 12 | RM | |
57 | 31.02 | 150 mm bore | 12 | RM | |
58 | 32 | Supply, laying and testing ductile iron pressure flanged type, class K-9 suitable for rubber gasket joints in standard working length confirming to IS-8329/2000 with inside cement mortar lining duly ISI marked laid in trenches complete all as specified and directed of following sizes:. | |||
59 | 32.01 | 100 mm bore | 60 | RM | |
60 | 32.02 | 150 mm bore | 90 | RM | |
61 | 33 | M&L push on rubber type gasket joint (tyton joint best quality ISI mark) for spigot and socket DI pipe and fittings of following sizes: | |||
62 | 33.01 | 100 mm bore | 10 | Each | |
63 | 33.02 | 150mm bore | 7 | Each | |
64 | 34 | Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition / alternation of existing system for following sizes :- | |||
65 | 34.01 | 100 mm bore | 2 | Each | |
66 | 34.02 | 150 mm bore | 2 | Each | |
67 | 35 | M&L DI fittings such as bends, tapers, Tee piece, collars, caps, plugs, tail piece etc( any type, radius, angle) of socket and spigot ends or all socketed suitable for 80 to 150 mm bore complete all as specified and directed. | 50 | Kg | |
68 | 36 | Supply and fix cast iron flanged sluice valve of class 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel all as specified and directed by EIC including taking down old unserviceable one of following size | |||
69 | 36.01 | (a) 80 mm bore | 2 | Each | |
70 | 36.02 | (b) 100 mm bore | 1 | Each | |
71 | 36.03 | (c) 150mm bore | 1 | Each | |
72 | 37 | Supply and fix Non return Valve of size 80 mm dia as per IS5312 (Part-I) latest edition and cast iron flanged type incl jointing with rubber insertion joints bolts, nuts and washers all as specified and directed by EIC including taking down old unserviceable one | 1 | Each | |
73 | 38 | M&L for brick with sub class B brick straight or curved on plain exc 6 m mean radius built in cm 1:4 complete all as directed | 2 | Cum | |
74 | 39 | M&L for PCC 1:2:4 type B1 using 20 mm stone aggregate as in copping/support both including necessary form work etc complete all as directed | 2 | Cum | |
75 | 40 | M&L for rendering 15mm thick on fair face of brick work in CM 1:4 finished aven and smooth wiyh out using extra cement complete all as specified and directed. | 10 | Sqm | |
76 | 41 | M & L for framed work for valve pit chamber cover made of MS equal angle and MS sheet including welding, cutting, hinges, locking arrangements including painting complete all as specified and directed. | 156 | Kg | |
77 | 42 | S & F MS Clamp Made out of MS flat/Angle iron grade E-250 for any dia of CI / GI pipe and MS base frame of chemical dozing pump sets complete all as specified and directed. | 20 | Kg | |
78 | 43 | S&F Ball brass valve ,high presuure,with polythlene float & fly nut complete screwed for iron pipe of the following size complete all as spfd. | |||
79 | 43.01 | 15 mm bore | 20 | Each | |
80 | 43.02 | 20 mm bore | 15 | Each | |
81 | 43.03 | 25 mm bore | 10 | Each | |
82 | 44 | Supply & replacement of submersible flat cable flexible 3 core copper flat of size 16 sqmm x 3 core 150/0.25 including testing complete all as directed to Engr-in-charge. | 75 | RM | |
83 | 45 | Supply and fixing fully automatic star delta starter ML - 4 in sheet steel enclosure type MN with single phase protection feature (motor rating AC-3 duty, 415 V, 50 Hz, 3 Ph) cap 12.5 HP to 20 HP, 55 KW relay range 45-75 all as specified and directed to Engr-in-charge. Make : L&T or equivelent | 1 | Each | |
84 | 46 | Supply only Calcium Hypo Chlorite having 65% - 70% Chlorine cement (Calcium based granular disinfectant) for general water treatment and swimming pool water treatment in factory sealed container / drum (45 KG packing) complete all as specified and directed.\n | 5 | Each Pkt 45 Kg | |
85 | 47 | S&F in repair rotational moulded polythlene water storage tank of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Part I. | 12 | Each | |
86 | 48 | Supply and lowering in bore hole galvanized iron column pipe 80 mm dia medium grade (approximately 3 mtr length) each duly flanged at both ends by welding with special provn such as slots for housing two Nos submersible cable and holes for fixing nut bolts including painting with one coat of synthetic enamel paint over a coat of primer complete as specified and directed. | 18 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail