Uttar Pradesh Rajya Nirman Sahkari Sangh Limited has published Construction Of Pashu Chikitsalaya At Makdoom Saraini Distt Ambedkarnagar For Material. Submission Date for this Tender is 21-10-2019. Brushes Tenders in makdoom sarain distt ambedkarnagar Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of PAashu Chikitsalaya Building (remaining work) at - Makdoom Sarin, DISTT. - AMBEDKAR NAGAR (U.P.) for material. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply of Ordinary Portland Cement | 447 | BAGS | |
| 2 | 2 | Supply of Class M-150 1st Class Bricks | 71791 | NOS. | |
| 3 | 3 | Supply of Coarse Sand (2.25 FM & above) | 31.85 | CUM | |
| 4 | 4 | Supply of Stone Grit (20 mm) | 29.32 | CUM | |
| 5 | 5 | Supply of Stone Ballast | 11.3 | CUM | |
| 6 | 6 | Supply of Steel Bars TMT-Fe 415 | 25.93 | QTL | |
| 7 | 7 | Supply of Vitrified Floor Tiles (600x600 mm.) | 179.53 | SQM | |
| 8 | 8 | Supply of Kota Stone | 31.42 | SQM | |
| 9 | 9 | Supply of Bending Wire | 30.29 | KG | |
| 10 | 10 | Providing and fixing of ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick | 10.5 | SQM | |
| 11 | 11 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502) Fabrication of hold fast for door chaukhats and windows. | 44.4 | KG | |
| 12 | 12 | Fabrication of grill / stair case railing. | 259.2 | KG | |
| 13 | 13 | Fabrication of Z-section steel windows. | 324 | KG | |
| 14 | 14 | Angle iron chaukhats (40*40*5) | 78 | KG | |
| 15 | 15 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | 21.6 | SQM | |
| 16 | 16 | Fixing of steel or wooden chaukhats in position for Door chaukhats | 5 | NOS | |
| 17 | 17 | Fixing of steel or wooden chaukhats in position for Window chaukhats | 11 | NOS | |
| 18 | 18 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | 37.23 | SQM | |
| 19 | 19 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work but on new wood surface. | 21 | SQM | |
| 20 | 20 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 199.84 | SQM | |
| 21 | 21 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | 204.76 | SQM | |
| 22 | 22 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost of all materials. (PWD 649+650) | 85.23 | SQM | |
| 23 | 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 489.83 | SQM | |
| 24 | 24 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete work. | 21.6 | SQM | |
| 25 | 25 | Providing & fixing of Strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level of 35mm depth | 245.14 | RM | |
| 26 | 26 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. 250x16 mm | 5 | NOS | |
| 27 | 27 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete 250x10 mm | 5 | NOS | |
| 28 | 28 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm | 10 | NOS | |
| 29 | 29 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 5 | NOS | |
| 30 | 30 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 9.33 | SQM | |
| 31 | 31 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | 9 | PT | |
| 32 | 32 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects but for 5 Amp plug point with piano type switch and socket etc. | 9 | PT | |
| 33 | 33 | Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. | 25 | Rmt. | |
| 34 | 34 | Sq.mmWith 1X4 sq.mm. Earth wire in 25 mm dia conduit. Sq.mm. In 25 mm dia conduit. | 30 | Rmt. | |
| 35 | 35 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. | 2 | Each | |
| 36 | 36 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. | 1 | Each | |
| 37 | 37 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. | 3 | Each | |
| 38 | 38 | Supply & fixing of factory wired HPF box type flourescent tube light fitting suitable for following fluorescent tube including tubes etc. complete as required.1x40 Watt. | 5 | Nos. | |
| 39 | 39 | Supply & fixing of fbatten/ angle holder complete in all respect. | 2 | Each | |
| 40 | 40 | supply and erection of AC 1400mm Sweep 230/250 Volts, 50 Hz ceilling with regulater standar down rod, blades including conection etc. complete as required. | 3 | Nos. | |
| 41 | 41 | Supply of AC 230/250 volts 50 HZ exhaust fans including providing bolts, mounting frame and cther accessories etc. complete | 1 | Nos. | |
| 42 | 42 | Supply & fixing of sodium vapour lamp. | 2 | Nos. | |
| 43 | 43 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size | 1 | Nos. | |
| 44 | 44 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size | 1 | Nos. | |
| 45 | 45 | Supply and fixing of flush/surface mounting distribution boards complete in all respects. 4 Way TPN | 1 | Nos. | |
| 46 | 46 | Supply fixing of 240 volts ' L' series miniature circuit breaker 9 K.A/ . In existing MCB, DB complete with connections as required. 32 amp | 2 | Nos. | |
| 47 | 47 | Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 40 Amp. 4 Pole | 1 | Nos. | |
| 48 | 48 | Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. | 8 | Each | |
| 49 | 49 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. | 1 | Each | |
| 50 | 50 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. | 15 | Rmt. | |
| 51 | 51 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. | 15 | Rmt. | |
| 52 | 52 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 95 sqmm 3.5 core | 25 | Mtr | |
| 53 | 53 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick | 3.15 | SQM | |
| 54 | 54 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502) Fabrication of hold fast for door chaukhats and windows. | 9.6 | KG | |
| 55 | 55 | Fabrication of grill / stair case railing. | 6.48 | KG | |
| 56 | 56 | Fabrication of Z-section steel windows. | 8.1 | KG | |
| 57 | 57 | Angle iron chaukhats (40*40*5) | 29.7 | KG | |
| 58 | 58 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | 0.54 | SQM | |
| 59 | 59 | Fixing of steel or wooden chaukhats in position for Door chaukhats | 2 | NOS | |
| 60 | 60 | Fixing of steel or wooden chaukhats in position for Ventilator chaukhats | 2 | NOS | |
| 61 | 61 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | 2.43 | SQM | |
| 62 | 62 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work but on new wood surface. | 6.3 | SQM | |
| 63 | 63 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. | 40.82 | SQM | |
| 64 | 64 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost of all materials. | 11.81 | SQM | |
| 65 | 65 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost of all materials. | 6.77 | SQM | |
| 66 | 66 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete work. | 0.54 | SQM | |
| 67 | 67 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 48.12 | RM | |
| 68 | 68 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | 2 | NOS | |
| 69 | 69 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250 mm x 10mm | 2 | NOS | |
| 70 | 70 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | 4 | NOS | |
| 71 | 71 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement. | 2 | Nos. | |
| 72 | 72 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. | 2 | Nos. | |
| 73 | 73 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete of 32mm dia | 2 | Nos. | |
| 74 | 74 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete of 40mm dia | 1 | Nos. | |
| 75 | 75 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. | 2 | Nos. | |
| 76 | 76 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm | 1 | No. | |
| 77 | 77 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe of 32mm dia | 2 | Nos. | |
| 78 | 78 | Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. | 2 | Each | |
| 79 | 79 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms | 3 | Each | |
| 80 | 80 | Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe. | 3 | Rm. | |
| 81 | 81 | Providing & fixing soil, waste and vent pipes. b) 75mm dia centrifugally cast iron S & S pipe. | 5 | Rm. | |
| 82 | 82 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters.a) 100mm | 3 | No. | |
| 83 | 83 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters.b) 75mm | 5 | No. | |
| 84 | 84 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron / cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.a) for 100mm dia pipe. | 1 | Nos. | |
| 85 | 85 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls & floors. a) 100mm inlet & 100mm outlet. | 1 | Nos. | |
| 86 | 86 | b) 100mm inlet & 75mm outlet. | 1 | Nos. | |
| 87 | 87 | Providing & fixing sand cast iron S and S bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete. a) 100mm dia. | 1 | Nos. | |
| 88 | 88 | b) 75mm dia. | 1 | Nos. | |
| 89 | 89 | Painting sand cast iron/centrifugally cast (spum) iron pipes and fittings with paint of any colour over a coat of primer of approved quality. (for new work) a) 100mm | 1 | Nos. | |
| 90 | 90 | b) 75mm | 1 | Nos. | |
| 91 | 91 | Providing and fixing PTMT towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.450mm. Long with total length of 495mm, width 78mm and effiective height of 88mm. | 1 | Nos. | |
| 92 | 92 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter | 3 | Mtr | |
| 93 | 93 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm | 2 | Nos. | |
| 94 | 94 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work). Exposed on wall a) 25mm dia nominal bore (medium duty) | 2 | Rm. | |
| 95 | 95 | c) 15mm dia nominal bore | 3 | Rm. | |
| 96 | 96 | d) 20mm dia nominal bore | 2 | Rm. | |
| 97 | 97 | Painting G.I. pipes and fittings with two synthetic enamel white paint over a ready mixed priming coat, both of paint of approved quality for new work. a) 25mm dia nominal bore. | 2 | Rm. | |
| 98 | 98 | c) 15mm dia nominal bore. | 3 | Rm. | |
| 99 | 99 | d) 20mm dia nominal bore. | 2 | Rm. | |
| 100 | 100 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore | 1 | Nos. | |
| 101 | 101 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore | 1 | Nos. | |
| 102 | 102 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore | 1 | Nos. | |
| 103 | 103 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore | 2 | Nos. | |
| 104 | 104 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). a) 25mm. Nominal bore | 1 | Nos | |
| 105 | 105 | Providing and fixing gun metal gate valve with wheel of approved quality. a) 25mm dia nominal bore | 1 | Each | |
| 106 | 106 | Capacity 500 litre | 300 | Ltrs. | |
| 107 | 107 | Providing and fixing brass stop cock of approved quality. a) 20 mm nominal bore | 1 | Nos. | |
| 108 | 108 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. | 3 | RM | |
| 109 | 109 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 150mm diameter | 3 | M | |
| 110 | 110 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.a) 100mm diameter S.W. Pipe | 3 | M | |
| 111 | 111 | Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.a) 150 x 100 mm. size P type | 1 | Nos | |
| 112 | 112 | Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. | 1 | Nos | |
| 113 | 113 | Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729 | 2 | RM | |
| 114 | 114 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) | 18 | NO. | |
| 115 | 115 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 1 | NO. | |
| 116 | 116 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.(PWD-660+661) | 78.53 | SQM | |
| 117 | 117 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | 47.94 | SQM | |
| 118 | 118 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | 14.95 | SQM | |
| 119 | 119 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 128.76 | RM | |
| 120 | 120 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502) Fabrication of grill / stair case railing. | 96.75 | KG | |
| 121 | 121 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.(PWD-660+661) | 21.39 | SQM | |
| 122 | 122 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | 15.87 | SQM | |
| 123 | 123 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | 18.84 | SQM | |
| 124 | 124 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 123.12 | RM | |
| 125 | 125 | Using M.S. Angles 40x40x5mm for diagonal braces. | 154.05 | KG | |
| 126 | 126 | Mild steel or iron work of small size and sections such as holding down bolts hold fast, tie rods, grating etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc. including supply of steel and its wastage including cost of bolts, nuts if required, welding ,grinding and making holes as required for completion of work. M.S or iron work in Door/Window/Ventilator | 48 | KG | |
| 127 | 127 | Fabrication of Z section fixed / Open able steel windows including necessary steel fitting such as handles stay etc. | 129.95 | KG | |
| 128 | 128 | Fabrication of window/Fixed Grill. | 103.95 | KG | |
| 129 | 129 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | 8.67 | SQM | |
| 130 | 130 | Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats | 10 | NOS | |
| 131 | 131 | Fixing of Door, windows / ventilators chaukhats in position. (b) Window chaukhats | 4 | NOS | |
| 132 | 132 | Fixing of Door, windows / ventilators chaukhats in position. (c) Ventilator chaukhats | 2 | NOS | |
| 133 | 133 | Providing and fixing of flush door shutters commercial quality conforming to IS : 2202 Part I (1983) including fixing fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 35 mm thick Single leaf | 19.64 | SQM | |
| 134 | 134 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . | 10 | NOS | |
| 135 | 135 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250mm x 10mm . | 10 | NOS | |
| 136 | 136 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm | 20 | NOS | |
| 137 | 137 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 10 | NOS. | |
| 138 | 138 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an evem shade : Two or more coats on new work ( Ist quality (Royal, Silk)Aslan/Berger) | 169.83 | SQM | |
| 139 | 139 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer | 278.28 | SQM | |
| 140 | 140 | Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. | 237.37 | SQM | |
| 141 | 141 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Two Coat) | 381.87 | SQM | |
| 142 | 142 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 1067.35 | SQM | |
| 143 | 143 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. | 8.67 | SQM | |
| 144 | 144 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | 20.45 | SQM | |
| 145 | 145 | Painting two coats over priming coat on wood surfaces up to 10 cm width or small articles not exceeding 0.10 SqM in area with superior synthetic enamel such Luxol 3, High gloss apcolite super lac dulux or equivalent, specified brushing to give even shade including cleaning the surface if all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labours ,Tools and plants etc. required for proper completion of work. | 39.27 | SQM | |
| 146 | 146 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 187.425 | RM | |
| 147 | 147 | Providing & fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware/Hindware/ Seabird/Orient (Coral) with all fittings andfixtures complete including cutting and ,making good the walls and floors whereever required.White vitreous china Orissa Pattern W.C.pan of size 550x440 mm with inetgeral type foot rests | 2 | Each | |
| 148 | 148 | Providing & fixing wash basin with C.I./MS brackets 15mm. CP brass pillar taps, 32mm. C.P. brass wasre of standard pattern, including painting of fittings & brackets, cutting & making good the walls where ever requiredFlat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap. | 2 | Each | |
| 149 | 149 | Providing & fixing Salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm. including painting of fittings and brackets, cutting and making good the walls wherever requirewd. 460x915 mm. Bowl depth 178 mm. | 1 | Nos. | |
| 150 | 150 | Providing & fixing flexible PVC waste pipe for sink or wash basin including PVC waste fitting complete. 32mm dia (for wash basin) | 1 | Nos. | |
| 151 | 151 | Providing & fixing 600X450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers . | 2 | Nos. | |
| 152 | 152 | Providing & fixing Soil waste & vent pipe .100 mm dia Sand Cast iron S&S pipe | 10 | M | |
| 153 | 153 | Providing & fixing Soil waste & vent pipe . 75 mm. dia sand cast iron S&S pipe | 15 | M | |
| 154 | 154 | Providing and fixing coller sand cast iron S&S. 100mm dia Sand Cast iron S&S pipe | 2 | Nos | |
| 155 | 155 | Providing and fixing coller sand cast iron S&S. 75mm dia Sand Cast iron S&S pipe | 2 | Nos | |
| 156 | 156 | Providing lead chalked joints to sand cast iron pipes & fittings. 100 mm. dia | 2 | Nos. | |
| 157 | 157 | Providing lead chalked joints to sand cast iron pipes & fittings. 75 mm. dia | 2 | Nos. | |
| 158 | 158 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors.100mm inlet & 100mm. Outlet | 2 | Nos | |
| 159 | 159 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors.100mm inlet & 75mm. Outlet | 2 | Nos | |
| 160 | 160 | Providing and fixing G.I. pipe complete with G.I. fitting & clamps, including cutting & making good the wall etc.(a) 15 mm. Dia | 30 | RM | |
| 161 | 161 | (b) 20 mm. Dia | 20 | RM | |
| 162 | 162 | (c) 25 mm. Dia | 10 | RM | |
| 163 | 163 | Providing & Fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25mm. Nominal bore | 2 | Each | |
| 164 | 164 | Supplying pig lead at site of work | 1 | Qtl. | |
| 165 | 165 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 15mm. Dia | 30 | Mtr. | |
| 166 | 166 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work 20mm. Dia | 20 | Mtr. | |
| 167 | 167 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work 25mm. Dia | 10 | Mtr. | |
| 168 | 168 | Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI:12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet , outlet , and ove flow pipes but without fittings and the base support for tank | 1000 | Ltr | |
| 169 | 169 | Providing and fixing C.P. brass bib cock of approved quality conforming IS:8931.(a) 15 mm. Nominal bore | 4 | Each | |
| 170 | 170 | Providing and fixing C.P. brass stop cock concealed) of standard design & of approved make conforming to IS:8931.(a) 15 mm. nominal bore | 2 | Each | |
| 171 | 171 | Providing and fixing C.P. angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.(a) 15 mm. nominal bore | 2 | Each | |
| 172 | 172 | Providing & fixing towel rail 610x20 mm. size complete with CP brass brackets fixed to wooden cleats with CP brass screws . | 2 | Nos. | |
| 173 | 173 | Providing & fixing stainless steel jalli (grating) with or without hole for waste pipe for floor/nahani trap.(a) 100 mm. Dia. Weight not less than 100gms. | 4 | Nos | |
| 174 | 174 | Wiring point for light with 1.0 sq.mm. FR P.V.C. insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G. GI copper earth continuity wire.piano type switch & ceiling rose /angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects , as directed , including matching colour wash but in PVC conduit with 1.5 sqmm. FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside. | 18 | Nos. | |
| 175 | 175 | Wiring point for fan/fresh air fan ( light duty exhaust fan ) with 1.0 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch & ceiling rose on 3.0 mm thick backelite sheet etc. complete complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multstrand copper conductor cable earth wire drawn inside the conduit. | 7 | NOS | |
| 176 | 176 | Wiring point for plug with 1.0 sqmm.FR PVC insulated multistrand single core copper cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch and socket etc. complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multistrand copper conductor as earth wire drawn in side the conduit. | 6 | NOS | |
| 177 | 177 | Supply and fixing and concealing of 20 mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confiroming to IS No. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I/C. but 25 mm dia. 2 mm thick PVC conduit. | 150 | M | |
| 178 | 178 | Supply and fixing 2/3/4 ways round steel junction box confirming to ISS for 20mm. dia PVC conduit concealed in wall, keeping its level up to plaster duly provided with copper size cover screwed as directed at site by the Engineer I/C with the supply of all material labour and T&P required for proper completion of work but 25 mm dia.PVC conduit. | 60 | Nos. | |
| 179 | 179 | Supply and fixing of switch box made up of 16 SWG (1.5 mm.) thick M.S. sheet of 100 x 100 x 65 mm. size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the E/I.but of size 200 x 250 x 65 mm. size. | 18 | each | |
| 180 | 180 | Supply & wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 volts grade multistrand single core copper conductor cable in20mm. dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14S.W.G. G.I. Earth continuity wire (a)1 X 2.5 Sqmm in 20 mm dia conduit | 150 | M | |
| 181 | 181 | Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.Category A | 8 | Each | |
| 182 | 182 | Supply and burying of 600 mm.x600mmx 3.0 mm. copper plate plate vertically for earthing with its top at least 3 meter below ground level complete with 20 mm. G.I. Pipe & funnel for watering and one earthing lead of one no. 8 S.W.G. wire in 15mm. dia G.I. pipe upto switch board (from apronto switch board the cost of GI pipe & GI wire will be extra) 300mm Square C.I. frame with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm. thick alround etc. as per directions of engineer-in- charge complete in all respects | 1 | each | |
| 183 | 183 | Supply and Laying of 35x3 mm. G.I. strip from earth electrode directly in the ground as required complete in all respects. | 15 | Mtr. | |
| 184 | 184 | Supply and fixing of 6/10/16/20/25/30/32 amp. SP MCB (10K.A.) make - MDS/ABB | 8 | nos | |
| 185 | 185 | S/F Of surface/ flush mounting TPN distribution board without MCB complete in all respect as directed at site. (a) 4 ways | 4 | nos | |
| 186 | 186 | Erection and testing of ceiling fan and regulator, etc. excluding supply of down rod , complete in all respect. | 8 | Nos | |
| 187 | 187 | Supply & fixing of power plug with 15 amp. 240 volts flush type switch and 5pin 15 amp. 250volts flush type socket in suitable M.S. box of 175mm x100mmx50mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washer complete | 4 | nos | |
| 188 | 188 | S/F of hexagonal fan box with hexagonal side of approximate 80 mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm dia. MS. Round bar duly bend for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting along with supply of all material, labour and T&P etc. required for proper completion of the work. | 5 | nos | |
| 189 | 189 | Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod , blades, 2nos . Caps etc. complete.(a) 1200 mm sweep | 7 | Nos | |
| 190 | 190 | Supply of AC 230/250 volts, 50Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete ISI marked. 300mm. Sweep 1400 rpm | 2 | Nos | |
| 191 | 191 | Using M.S. Angles 35x35x5mm for diagonal braces. | 213.6 | KG | |
| 192 | 192 | Mild steel or iron work of small size and sections such as holding down bolts hold fast, tie rods, grating etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc. including supply of steel and its wastage including cost of bolts, nuts if required, welding ,grinding and making holes as required for completion of work. M.S or iron work in Door/Window/Ventilator | 69.6 | KG | |
| 193 | 193 | Fabrication of Z section fixed / Open able steel windows including necessary steel fitting such as handles stay etc. | 159.75 | KG | |
| 194 | 194 | Fabrication of window/Fixed Grill. | 127.8 | KG | |
| 195 | 195 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | 10.65 | SQM | |
| 196 | 196 | Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats | 14 | NOS | |
| 197 | 197 | (b) Window chaukhats | 6 | NOS | |
| 198 | 198 | (c) Ventilator chaukhats | 4 | NOS | |
| 199 | 199 | Providing and fixing of flush door shutters commercial quality conforming to IS : 2202 Part I (1983) including fixing fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 30 mm thick Single leaf | 26.04 | SQM | |
| 200 | 200 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | 14 | NOS | |
| 201 | 201 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250 mm x 10mm | 14 | NOS | |
| 202 | 202 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | 28 | NOS | |
| 203 | 203 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer | 338.44 | SQM | |
| 204 | 204 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. | 216.36 | SQM | |
| 205 | 205 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. | 10.65 | SQM | |
| 206 | 206 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | 26.28 | SQM | |
| 207 | 207 | Painting two coats over priming coat on wood surfaces up to 10 cm width or small articles not exceeding 0.10 SqM in area with superior synthetic enamel such Luxol 3, High gloss apcolite super lac dulux or equivalent, specified brushing to give even shade including cleaning the surface if all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labours ,Tools and plants etc. required for proper completion of work. | 52.08 | SQM | |
| 208 | 208 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 388.33 | RM | |
| 209 | 209 | Providing & fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware/Hindware/ Seabird/Orient (Coral) with all fittings andfixtures complete including cutting and ,making good the walls and floors whereever required.White vitreous china Orissa Pattern W.C.pan of size 550x440 mm with inetgeral type foot rests | 2 | Each | |
| 210 | 210 | Providing & fixing wash basin with C.I./MS brackets 15mm. CP brass pillar taps, 32mm. C.P. brass wasre of standard pattern, including painting of fittings & brackets, cutting & making good the walls where ever required. Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap. | 2 | Each | |
| 211 | 211 | Providing & fixing Salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm. including painting of fittings and brackets, cutting and making good the walls wherever requirewd. 460x915 mm. Bowl depth 178 mm. | 2 | Nos. | |
| 212 | 212 | Providing & fixing flexible PVC waste pipe for sink or wash basin including PVC waste fitting complete. 32mm dia (for wash basin) | 2 | Nos. | |
| 213 | 213 | Providing & fixing flexible PVC waste pipe for sink or wash basin including PVC waste fitting complete. 40mm dia (for wash basin) | 2 | Nos. | |
| 214 | 214 | Providing & fixing 600X450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws & washers . | 2 | Nos. | |
| 215 | 215 | Providing & fixing Soil waste & vent pipe.100 mm dia Sand Cast iron S&S pipe | 10 | M | |
| 216 | 216 | Providing & fixing Soil waste & vent pipe . 75 mm. dia sand cast iron S&S pipe | 15 | M | |
| 217 | 217 | Providing and fixing coller sand cast iron S&S. 100mm dia Sand Cast iron S&S pipe | 2 | Nos | |
| 218 | 218 | Providing and fixing coller sand cast iron S&S. 75mm dia Sand Cast iron S&S pipe | 2 | Nos | |
| 219 | 219 | Providing lead chalked joints to sand cast iron pipes & fittings.100 mm. dia | 2 | Nos. | |
| 220 | 220 | Providing lead chalked joints to sand cast iron pipes & fittings. 75 mm. dia | 2 | Nos. | |
| 221 | 221 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors.100mm inlet & 100mm. Outlet | 4 | Nos | |
| 222 | 222 | 100mm inlet & 75mm. Outlet | 4 | Nos | |
| 223 | 223 | Providing and fixing G.I. pipe complete with G.I. fitting & clamps, including cutting & making good the wall etc.(a) 15 mm. Dia | 30 | RM | |
| 224 | 224 | (b) 20 mm. Dia | 20 | RM | |
| 225 | 225 | (c) 25 mm. Dia | 10 | RM | |
| 226 | 226 | Providing & Fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) . 25mm. Nominal bore | 2 | Each | |
| 227 | 227 | Supplying pig lead at site of work | 1 | Qtl. | |
| 228 | 228 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 15mm. Dia | 30 | Mtr. | |
| 229 | 229 | 20mm. Dia | 20 | Mtr. | |
| 230 | 230 | 25mm. Dia | 10 | Mtr. | |
| 231 | 231 | Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI:12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet , outlet , and ove flow pipes but without fittings and the base support for tank | 1000 | Ltr | |
| 232 | 232 | Providing and fixing C.P. brass bib cock of approved quality conforming IS:8931. (a) 15 mm. Nominal bore | 4 | Each | |
| 233 | 233 | Providing and fixing C.P. brass stop cock concealed) of standard design & of approved make conforming to IS:8931. (a) 15 mm. nominal bore | 4 | Each | |
| 234 | 234 | Providing and fixing C.P. angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. (a) 15 mm. nominal bore | 2 | Each | |
| 235 | 235 | Providing & fixing towel rail 610x20 mm. size complete with CP brass brackets fixed to wooden cleats with CP brass screws . | 2 | Nos. | |
| 236 | 236 | Providing & fixing stainless steel jalli (grating) with or without hole for waste pipe for floor/nahani trap. (a) 100 mm. Dia. Weight not less than 100gms. | 4 | Nos | |
| 237 | 237 | Wiring point for light with 1.0 sq.mm. FR P.V.C. insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G. GI copper earth continuity wire.piano type switch & ceiling rose /angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects , as directed , including matching colour wash but in PVC conduit with 1.5 sqmm. FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside. | 24 | Nos. | |
| 238 | 238 | Wiring point for fan/fresh air fan ( light duty exhaust fan ) with 1.0 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch & ceiling rose on 3.0 mm thick backelite sheet etc. complete complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multstrand copper conductor cable earth wire drawn inside the conduit. | 6 | NOS | |
| 239 | 239 | Wiring point for plug with 1.0 sqmm.FR PVC insulated multistrand single core copper cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch and socket etc. complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multistrand copper conductor as earth wire drawn in side the conduit. | 2 | NOS | |
| 240 | 240 | Supply and fixing and concealing of 20 mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confiroming to IS No. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I/C but 25 mm dia. 2 mm thick PVC conduit. | 175 | M | |
| 241 | 241 | Supply and fixing 2/3/4 ways round steel junction box confirming to ISS for 20mm. dia PVC conduit concealed in wall, keeping its level up to plaster duly provided with copper size cover screwed as directed at site by the Engineer I/C with the supply of all material labour and T&P required for proper completion of work but 25 mm dia.PVC conduit. | 20 | Nos. | |
| 242 | 242 | Supply and fixing of switch box made up of 16 SWG (1.5 mm.) thick M.S. sheet of 100 x 100 x 65 mm. size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the E/I but of size 200 x 250 x 65 mm. size. | 4 | each | |
| 243 | 243 | Supply & wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 volts grade multistrand single core copper conductor cable in20mm. dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14S.W.G. G.I. Earth continuity wire (a)1 X 2.5 Sqmm in 20 mm dia conduit | 180 | M | |
| 244 | 244 | Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.Category A | 16 | Each | |
| 245 | 245 | Supply and burying of 600 mm.x600mmx 3.0 mm. copper plate plate vertically for earthing with its top at least 3 meter below ground level complete with 20 mm. G.I. Pipe & funnel for watering and one earthing lead of one no. 8 S.W.G. wire in 15mm. dia G.I. pipe upto switch board (from apronto switch board the cost of GI pipe & GI wire will be extra) 300mm Square C.I. frame with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm. thick alround etc. as per directions of engineer-in- charge complete in all respects | 1 | each | |
| 246 | 246 | Supply and Laying of 35x3 mm. G.I. strip from earth electrode directly in the ground as required complete in all respects. | 15 | Mtr. | |
| 247 | 247 | Supply and fixing of 6/10/16/20/25/30/32 amp. SP MCB (10K.A.) make - MDS/ABB | 4 | nos | |
| 248 | 248 | S/F Of surface/ flush mounting TPN distribution board without MCB complete in all respect as directed at site (a) 4 ways | 2 | nos | |
| 249 | 249 | Erection and testing of ceiling fan and regulator, etc. excluding supply of down rod , complete in all respect. | 4 | Nos | |
| 250 | 250 | Supply & fixing of power plug with 15 amp. 240 volts flush type switch and 5pin 15 amp. 250volts flush type socket in suitable M.S. box of 175mm x100mmx50mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washer complete | 2 | nos | |
| 251 | 251 | S/F of hexagonal fan box with hexagonal side of approximate 80 mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm dia. MS. Round bar duly bend for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting along with supply of all material, labour and T&P etc. required for proper completion of the work. | 4 | nos | |
| 252 | 252 | Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod , blades, 2nos . Caps etc. complete.(a) 1200 mm sweep | 4 | Nos | |
| 253 | 253 | Supply of AC 230/250 volts, 50Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete ISI marked. 300mm. Sweep 1400 rpm | 2 | Nos | |
| 254 | 254 | Using M.S. Angles 35x35x5mm for diagonal braces. | 151.8 | KG | |
| 255 | 255 | Mild steel or iron work of small size and sections such as holding down bolts hold fast, tie rods, grating etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc. including supply of steel and its wastage including cost of bolts, nuts if required, welding ,grinding and making holes as required for completion of work. M.S or iron work in Door/Window/Ventilator | 45.6 | KG | |
| 256 | 256 | Fabrication of Z section fixed / Open able steel windows including necessary steel fitting such as handles stay etc. | 92.48 | KG | |
| 257 | 257 | Fabrication of window/Fixed Grill. | 73.98 | KG | |
| 258 | 258 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | 6.17 | SQM | |
| 259 | 259 | Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats | 10 | NOS | |
| 260 | 260 | (b) Window chaukhats | 4 | NOS | |
| 261 | 261 | Providing and fixing of flush door shutters commercial quality conforming to IS : 2202 Part I (1983) including fixing fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 30 mm thick Single leaf | 18.06 | SQM | |
| 262 | 262 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | 10 | NOS | |
| 263 | 263 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250 mm x 10mm | 10 | NOS | |
| 264 | 264 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | 20 | NOS | |
| 265 | 265 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer | 199.61 | SQM | |
| 266 | 266 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. | 108.68 | SQM | |
| 267 | 267 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. | 6.17 | SQM | |
| 268 | 268 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | 29.34 | SQM | |
| 269 | 269 | Painting two coats over priming coat on wood surfaces up to 10 cm width or small articles not exceeding 0.10 SqM in area with superior synthetic enamel such Luxol 3, High gloss apcolite super lac dulux or equivalent, specified brushing to give even shade including cleaning the surface if all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labours ,Tools and plants etc. required for proper completion of work. | 36.12 | SQM | |
| 270 | 270 | Providing & fixing strips of 3.15mm. Thickness in joints of floor and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete of 35mm depth | 508.2 | RM | |
| 271 | 271 | Providing & fixing eater closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware/Hindware/ Seabird/Orient (Coral) with all fittings andfixtures complete including cutting and ,making good the walls and floors whereever required. White vitreous china Orissa Pattern W.C.pan of size 550x440 mm with inetgeral type foot rests | 2 | Each | |
| 272 | 272 | Providing & fixing Soil waste & vent pipe . 100 mm dia Sand Cast iron S&S pipe | 10 | M | |
| 273 | 273 | Providing & fixing Soil waste & vent pipe . 75 mm. dia sand cast iron S&S pipe | 5 | M | |
| 274 | 274 | Providing & Fixing M.S. holder-bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm. of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm. Nominal size) including cost of cutting holes and making good the walls etc. For 100mm. Dia pipe | 2 | Each | |
| 275 | 275 | Providing & Fixing M.S. holder-bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm. of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm. Nominal size) including cost of cutting holes and making good the walls etc. For 75mm. Dia pipe | 2 | Each | |
| 276 | 276 | Providing and fixing coller sand cast iron S&S. 100mm dia Sand Cast iron S&S pipe | 2 | Each | |
| 277 | 277 | Providing and fixing coller sand cast iron S&S. 75mm dia Sand Cast iron S&S pipe | 2 | Each | |
| 278 | 278 | Providing lead chalked joints to sand cast iron pipes & fittings. 100 mm. dia | 2 | Nos. | |
| 279 | 279 | Providing lead chalked joints to sand cast iron pipes & fittings. 75 mm. dia | 2 | Nos. | |
| 280 | 280 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors.100mm inlet & 100mm. Outlet | 2 | Nos | |
| 281 | 281 | Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors.100mm inlet & 75mm. Outlet | 2 | Nos | |
| 282 | 282 | Providing and fixing G.I. pipe complete with G.I. fitting & clamps, including cutting & making good the wall etc. (a) 15 mm. Dia | 5 | RM | |
| 283 | 283 | (b) 25 mm. Dia | 20 | RM | |
| 284 | 284 | Providing & Fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25mm. Nominal bore | 2 | Each | |
| 285 | 285 | Supplying pig lead at site of work | 0.1 | Qtl. | |
| 286 | 286 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 15mm. Dia | 75 | Mtr. | |
| 287 | 287 | Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI:12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet , outlet , and ove flow pipes but without fittings and the base support for tank | 1000 | Ltr | |
| 288 | 288 | Providing and fixing C.P. brass bib cock of approved quality conforming IS:8931. (a) 15 mm. Nominal bore | 2 | Each | |
| 289 | 289 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms. (a) 15 mm. Nominal bore | 2 | Each | |
| 290 | 290 | Providing and fixing C.P. brass stop cock concealed) of standard design & of approved make conforming to IS:8931. (a) 15 mm. nominal bore | 2 | Each | |
| 291 | 291 | Providing & fixing stainless steel jalli (grating) with or without hole for waste pipe for floor/nahani trap. (a) 100 mm. Dia. Weight not less than 100gms. | 4 | Nos | |
| 292 | 292 | Wiring point for light with 1.0 sq.mm. FR P.V.C. insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G. GI copper earth continuity wire.piano type switch & ceiling rose /angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects , as directed , including matching colour wash but in PVC conduit with 1.5 sqmm. FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside. | 10 | Nos. | |
| 293 | 293 | Wiring point for fan/fresh air fan ( light duty exhaust fan ) with 1.0 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch & ceiling rose on 3.0 mm thick backelite sheet etc. complete complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multstrand copper conductor cable earth wire drawn inside the conduit. | 2 | NOS | |
| 294 | 294 | Wiring point for plug with 1.0 sqmm.FR PVC insulated multistrand single core copper cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type switch and socket etc. complete in all respects including matching colour wash but in PVC conduit with 1.5 Sqmm FR PVC insulated multistrand copper conductor as earth wire drawn in side the conduit. | 2 | NOS | |
| 295 | 295 | Supply and fixing and concealing of 20 mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confiroming to IS No. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I/C. but 25 mm dia. 2 mm thick PVC conduit. | 80 | M | |
| 296 | 296 | Supply and fixing 2/3/4 ways round steel junction box confirming to ISS for 20mm. dia PVC conduit concealed in wall, keeping its level up to plaster duly provided with copper size cover screwed as directed at site by the Engineer I/C with the supply of all material labour and T&P required for proper completion of work but 25 mm dia.PVC conduit. | 8 | Nos. | |
| 297 | 297 | Supply and fixing of switch box made up of 16 SWG (1.5 mm.) thick M.S. sheet of 100 x 100 x 65 mm. size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the E/I but of size 200 x 250 x 65 mm. size. | 4 | each | |
| 298 | 298 | Supply & wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 volts grade multistrand single core copper conductor cable in20mm. dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14S.W.G. G.I. Earth continuity wire (a)1 X 2.5 Sqmm in 20 mm dia conduit | 80 | M | |
| 299 | 299 | Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.Category A | 4 | Each | |
| 300 | 300 | S/F factory wired HPF box type fluorescent tube light fitting suitable for 1x40 watts fluorescent tube complete including tube etc. on surface complete in all respect but with electronic ballast and 1x36 watt fluorescent lamp | 2 | Nos | |
| 301 | 301 | Supply and burying of 600 mm.x600mmx 3.0 mm. copper plate plate vertically for earthing with its top at least 3 meter below ground level complete with 20 mm. G.I. Pipe & funnel for watering and one earthing lead of one no. 8 S.W.G. wire in 15mm. dia G.I. pipe upto switch board (from apronto switch board the cost of GI pipe & GI wire will be extra) 300mm Square C.I. frame with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm. thick alround etc. as per directions of engineer-in- charge complete in all respects | 1 | each | |
| 302 | 302 | Supply and Laying of 35x3 mm. G.I. strip from earth electrode directly in the ground as required complete in all respects. | 7 | Mtr. | |
| 303 | 303 | Supply and fixing of 6/10/16/20/25/30/32 amp. SP MCB (10K.A.) make - MDS/ABB | 2 | nos | |
| 304 | 304 | Erection and testing of ceiling fan and regulator, etc. excluding supply of down rod , complete in all respect. | 2 | Nos | |
| 305 | 305 | Supply & fixing of power plug with 15 amp. 240 volts flush type switch and 5pin 15 amp. 250volts flush type socket in suitable M.S. box of 175mm x100mmx50mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washer complete | 2 | nos | |
| 306 | 306 | S/F of hexagonal fan box with hexagonal side of approximate 80 mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm dia. MS. Round bar duly bend for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting along with supply of all material, labour and T&P etc. required for proper completion of the work. | 2 | nos | |
| 307 | 307 | Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod , blades, 2nos . Caps etc. complete. (a) 1200 mm sweep | 2 | Nos | |
| 308 | 308 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem,durrocem,robiacem,guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.(PWD-660+661) | 15.04 | SQM | |
| 309 | 309 | Finishing walls with water-proof-ing on cement paint of approved make such as super snowcem durocem robiacem, guttucem, supercem quality and of required shade on undecorated wall surfaces ( one coat) over one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials | 9.57 | SQM | |
| 310 | 310 | S/F M.S. work in gate including all necessary for proper completion of the work. | 491.4 | KG | |
| 311 | 311 | Painting two coat over priming coat(but including cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 sqm in area with superior synthetic enamel such as LUXOL 3, Hi-gloss apcolite superlac, DULUX specified brushing to give an shade and including cleaning the surface of all dirt dust and other foreign matter sand papering and stoping including cost of all materials labour tools and plants etc.required for proper completion of the work. | 18.9 | SQM | |
| 312 | 312 | COST FOR INDIA MARKA HAND PUMP | 1 | NOS. | |
| 313 | 313 | COST FOR B.O.E. | 60 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
