High Visibiliy Warning

Sharing tender

Supply Of High Visibiliy Warning, High Visibiliy Warning Garments With Syntehtic Slide Fasteners. Type Of Garments-Waist Coat, Class:2 Size Extra Large With Patch Pocket. Specification: High Visibility Warning Clothing (Garment) In Fluorescent Orange Colour Is-15809 To 2008 In The Class And Size Conforming To Specification No, En471-2003 +A1: 2007. Colour Chromaticity Co-Ordinates Shall Lie Within Any One Of The Areas Defined In Table 2 And The Luminous Factor Shall Exceed The Corresponding Minimum Specified In Table 2Of En471-2003 +A1: 2007. Garment Shall Be Also Be In Accordance With The Requirements Of Level 2 Of Separate Material Conforming To Table 4 Of En-471-2003+A1:2007.2] Patch Pocket. Specification: Patch Pocket Size Of 15 Cmx15 Cm Stitched In The Garment Using Same Background Material Specified In General Technical Requirements And Used In The Garment Confirming To Specification No. En- 471-2003+A1:2007.3] Marking Of Departmental Identity Shall Be Provided Using Printing Matter Provided By The Indentor On A Micro Prismatic Reflective Label As Per Specification No. En:13356:2001 Type 3 Of Size 20 Cm X15 Cm Stitched At The Back Of The Garment. In Front Side, The Same Shall Be In 2 Pieces Of Reflective Material Of Size 5 Cm X 15 Cm Each Stitched To Both Flaps Of The Garments In Case Of Coverall, Jacket, Waist Coat And For Other Types Of Garments The Same Shall Be In Single Piece Of Reflective Material Of Size 5 Cm X 30 Cm. Marking Shall Be Printed On The Back Surface Of The Micro Prismatic Reflective Film So As Not To Expose The Same To Washing Etc%U2026 The Film Shall Then Be Assembled With Pvc Film Backing And Sealed On All 4 Sides With A Minimum Of 5 Mm Width Using R.F. Welding To Create Labels. One Set Of Marking Consists Of Marking Provided On Front And Back Sides Of One Garment As Per Photo Attached Annexure.