Indian Institute Of Technology-IITB has published Tender For Providing And Fixing Aluminium Partition , False Ceiling , Tile Flooring , Construction Working Platform With Granite And Painting Work In Pharmaceutical Chemistry Lab Room No . 1 , Department Of Pharmaceutics And Technology Engineering . Submission Date for this Tender is 05-11-2019. Flooring Work Tenders in IIT(BHU), Varanasi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: P/F aluminium partition, false ceiling, tile flooring, construction working platform with granite and painting work in Pharmaceutical Chemistry Lab Room No. 1, Department of Pharmaceutics & Technology Engineering, IIT(BHU), Varanasi. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing cement concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. | |||
| 2 | 1.01 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) | 6 | cum | |
| 3 | 2 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: | |||
| 4 | 2.01 | In cement mortar (15.7.4) | 7 | cum | |
| 5 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in: | |||
| 6 | 3.01 | Cement mortar 1:6 ( 1 cement : 6 coarse sand) (6.4.2) | 2 | cum | |
| 7 | 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level : | |||
| 8 | 4.01 | Cement mortar 1:4 (1 Cement : 4 coarse sand) (6.13.2) | 19 | sqm | |
| 9 | 5 | 12 mm cement plaster of mix : | |||
| 10 | 5.01 | 1:6 (1 cement : 6 coarse sand) (13.4.2) | 28 | sqm | |
| 11 | 6 | 15 mm cement plaster on rough side of single or half brick wall of mix : | |||
| 12 | 6.01 | 1:6 (1 cement : 6 coarse sand) (13.5.2) | 28 | sqm | |
| 13 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 14 | 7.01 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (4.1.3) | 10 | cum | |
| 15 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with (a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (5.3) | 5 | cum | |
| 16 | 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . | |||
| 17 | 9.01 | Thermo-Mechanically Treated bars. (5.22.6) | 471 | kg | |
| 18 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for: | |||
| 19 | 10.01 | Suspended floors, roofs, landings, balconies and access platform. (5.9.3) | 63 | sqm | |
| 20 | 11 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups, including rubbing ,curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. | |||
| 21 | 11.01 | Granite of any colour and shade | |||
| 22 | 11.02 | Area of slab over 0.50 sqm (8.2.2.2) | 45 | sqm | |
| 23 | 12 | Removing dry or oil bound distemper, water proffing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (14.46) | 184 | sqm | |
| 24 | 13 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80) | 184 | sqm | |
| 25 | 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade | |||
| 26 | 14.01 | New work (two or more coats) over and including water thinnable priming coat with cement primer (13.41.1) | 184 | sqm | |
| 27 | 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | |||
| 28 | 15.01 | One or more coats on old work. (14.54.1) | 100 | sqm | |
| 29 | 16 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P.brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: | |||
| 30 | 16.01 | (a) Size 450x300x150mm (17.11.1) | 4 | Nos. | |
| 31 | 16.02 | (b) Size 600x450x200mm (17.11.2) | 3 | Nos | |
| 32 | 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | |||
| 33 | 17.01 | Semi rigid pipe | |||
| 34 | 17.02 | 32 mm dia (17.28.1.1) | 7 | Nos | |
| 35 | 18 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. | |||
| 36 | 18.01 | 15 mm dia nominal bore (18.10.1) | 31 | metre | |
| 37 | 19 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : | |||
| 38 | 19.01 | 15 mm nominal bore (18.49.1) | 7 | Nos | |
| 39 | 20 | Providing and fixing C.P. brass stop cock (concealed) of standard\ndesign and of approved make conforming to IS:8931. | |||
| 40 | 20.01 | 15 mm nominal bore (18.52.1) | 7 | Nos | |
| 41 | 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (11.36) | 16 | sqm | |
| 42 | 22 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes | |||
| 43 | 22.01 | 75 mm diameter (12.41.1) | 27 | metre | |
| 44 | 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. | |||
| 45 | 23.01 | (a) Bend 87.5° (75 mm bend) (12.42.5.1) | 6 | Nos | |
| 46 | 23.02 | (b) Shoe (plain) 75 mmdia (12.42.6.1) | 3 | Nos | |
| 47 | 23.03 | (c) Coupler 75 mm (12.42.1.1) | 3 | Nos | |
| 48 | 24 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: | |||
| 49 | 24.01 | 75 mm (17.59.1.1) | 9 | Nos | |
| 50 | 25 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T | |||
| 51 | 25.01 | runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. | |||
| 52 | 25.02 | With 15 mm thick tegular edged light weight calcium \nsilicate false ceiling tiles. (26.22.1) | 88 | sqm | |
| 53 | 26 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | |||
| 54 | 26.01 | Size of Tile 600 x 600 mm (11.49.2) | 94 | sqm | |
| 55 | 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fastners of required dia & size, including necessary filling up the gaps at junctions, i.e. top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately.) | |||
| 56 | 27.01 | (a) For fixed portion | |||
| 57 | 27.02 | Powder coated aluminium (minimum thickness of powder coating 50 micron). (21.1.1.2) | 679 | kg | |
| 58 | 27.03 | (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | |||
| 59 | 27.04 | Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.2.2) | 109 | kg | |
| 60 | 28 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or garded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||
| 61 | 28.01 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side (21.2.1) | 55 | sqm | |
| 62 | 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item.) | |||
| 63 | 29.01 | With float glass panes of 5.50 mm thickness (21.3.2) | 60 | sqm | |
| 64 | 30 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: | |||
| 65 | 30.01 | 125 mm (9.100.1) | 12 | Nos | |
| 66 | 31 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. (21.13) | 6 | Nos | |
| 67 | 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701mm to 1000mm), with double speed adjustment with necessary accessories and screws etc. complete. (9.84) | 6 | Nos | |
| 68 | 33 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. | |||
| 69 | 33.01 | Twin rubber stopper (9.101.2) | 6 | Nos | |
| 70 | 34 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. | |||
| 71 | 34.01 | With 2nd class teak wood beading 62X19 mm (9.135.1) | 25 | sqm | |
| 72 | 35 | Cartage of Malba (Approved Rate) | 10 | Per Trip |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
