}

Renovation Of Toilet At 1St Floor And 2Nd Floor And Construction Of Chain Link Fencing In Front Of Porch ( From North Side To West Side ) Of Mining Engineering Iit ( Bhu ) , Varanasi . , IIT(BHU), Varanasi-Uttar Pradesh

Indian Institute Of Technology-IITB has published Renovation Of Toilet At 1St Floor And 2Nd Floor And Construction Of Chain Link Fencing In Front Of Porch ( From North Side To West Side ) Of Mining Engineering Iit ( Bhu ) , Varanasi . . Submission Date for this Tender is 05-11-2019. Toilet Bathroom Tenders in IIT(BHU), Varanasi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

22138904
Renovation Of Toilet At 1St Floor And 2Nd Floor And Construction Of Chain Link Fencing In Front Of Porch ( From North Side To West Side ) Of Mining Engineering Iit ( Bhu ) , Varanasi .
Open Tender
Indian
Uttar Pradesh
IIT(BHU), Varanasi
05-11-2019

Tender Details

Renovation Of Toilet At 1St Floor And 2Nd Floor And Construction Of Chain Link Fencing In Front Of Porch ( From North Side To West Side ) Of Mining Engineering Iit ( Bhu ) , Varanasi .

Key Value

Document Fees
INR 1180 /-
EMD
INR 45000.0 /-
Tender Value
INR 17.92 Lakhs /-

BOQ Items

Name of Work: Renovation of toilet at 1st floor & 2nd floor & Construction of chain link fencing in front of porch (From north side to west side) of Mining Engineering IIT (BHU), Varanasi.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of:
2 1.01 R.C.C. (15.34.2) 80 nos
3 2 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. (15.36) 200 kg
4 3 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m
5 3.01 All kinds of soil. (2.8.1) 75 cum
6 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (2.25) 14 cum
7 5 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m :
8 5.01 All kinds of soil. (2.28.1) 600 Sqm
9 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
10 6.01 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (4.1.8) 19 cum
11 7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
12 7.01 Cement mortar 1:6 (1 cement : 6 coarse sand) (6.1.2) 40 cum
13 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
14 8.01 Cement mortar 1:6 (1 cement : 6 coarse sand) (6.4.2) 10 cum
15 9 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
16 9.01 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). (5.1.2) 35 cum
17 10 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
18 10.01 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (5.2.2) 2 cum
19 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
20 11.01 Thermo-Mechanically Treated bars of grade Fe-500D or more.(5.22.6) 3023 kg
21 12 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
22 12.01 Thermo-Mechanically Treated bars of grade Fe-500D or more.(5.22A.6) 173 kg
23 13 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
24 13.01 In gratings, frames, guard bar, ladder, railings, brackets, gates\nand similar works (10.25.2) 2250 kg
25 14 Centering and shuttering including strutting, propping etc. and removal\nof form for all heights :
26 14.01 Foundations, footings, bases of columns .(5.9.1) 107 Sqm
27 14.02 Columns, Pillars, Piers, Abutments, Posts and Struts (5.9.6) 110 Sqm
28 14.03 Lintels, beams, plinth beams, girders, bressumers and\ncantilevers. with water proof ply 12 mm thick.(5.9.21) 142 Sqm
29 15 12 mm cement plaster of mix :
30 15.01 1:6 (1 cement: 6 coarse sand) (13.4.2) 190 Sqm
31 16 15 mm cement plaster on rough side of single or half brick wall\nof mix:
32 16.01 1:6 (1 cement: 6 coarse sand) (13.5.2) 155 Sqm
33 17 Finishing walls with acrylic Smooth exterior paint of required shade
34 17.01 ,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20kg/ 10 sqm) (13.46.1) 355 Sqm
35 18 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
36 18.01 For thickness of tiles 10 mm to 25 mm (15.23.1) 69 Sqm
37 19 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (15.56) 65 Sqm
38 20 Demolishing cement concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge.
39 20.01 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) 2 cum
40 20.02 Nominal concrete 1:4:8 or leaner mix (i/c equivalent desing mix) (15.2.2) \n 4 cum
41 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
42 21.01 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (4.1.3) 1 cum
43 22 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level
44 22.01 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (4.1.8) 2 cum
45 23 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface., (ii) IInd course of 20mm cement plaster 1:3 (1cement :3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm). (22.3) 23 Sqm
46 24 12 mm cement plaster of mix :
47 24.01 1:6 (1 cement : 6 coarse sand) (13.4.2) 65 Sqm
48 25 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. (11.37) 14 Sqm
49 26 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer) of approved make in all colours, shades except begundy, bottle green, black of any size as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (11.36) 58 Sqm
50 27 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75 x 50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of Engineer-in-charge and finished smooth.
51 27.01 Granite Stone of approved ahade (8.10.2) 1 Sqm
52 28 Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.:
53 28.01 White Vitreous china Orissa pattern W.C. pan.of size 580x440mm with integral type foot rests (17.1.1) 1 Nos
54 29 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
55 29.01 W.C. pan with ISI marked white solid plastic seat and lid (17.2.1) 1 Nos
56 30 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:
57 30.01 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. (17.5.1) 2 Nos
58 31 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
59 31.01 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (17.7.2) 2 Nos
60 32 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (17.31) 2 Nos
61 33 Providng and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality and colour.
62 33.01 450mm long towel rail with total lgnth of 495mm, 78mm wide and effective hight of 88mm, weighin not less thatn 170gms.(17.73.1) 2 Nos
63 34 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
64 34.01 a) 15 mm nominal bore (18.49.1) 2 Nos
65 35 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
66 35.01 15 mm nominal bore (18.52.1) 2 Nos
67 36 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
68 36.01 15 mm nominal bore (18.53.1) 2 Nos
69 37 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
70 37.01 Semi rigid pipe
71 37.02 32 mm dia (17.28.1.1) 4 Nos
72 38 Providing and fixing uplasticised PVC connection pipe with brass\nunions :
73 38.01 30 cm length
74 38.02 15 mm nominal bore (18.21.1.1) 2 Nos
75 39 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved qualityand colour , weighing not less than 300gms (17.74) . 2 Nos
76 40 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.\nInternal work - exposed on wall
77 40.01 15mm dia. nominal bore (18.10.1) 50 Mtr
78 41 Providing and fixing soil, waste and vent pipes :
79 41.01 100 mm dia.
80 41.02 Centrifugally cast (spun) iron socket & spigot (S &S) pipe as per IS :3989 (17.35.1.2) 30 mtr
81 42 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
82 42.01 100 mm
83 42.02 Sand cast iron S&S as per IS:- 3989 (17.38.1.2) 6 Nos
84 43 Providing and fixing collar:
85 43.01 100 mm dia.
86 43.02 Sand cast iron S&S as per IS: - 3989 (17.57.1.2) 10 Nos
87 44 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
88 44.01 100 mm (17.58.1) 30 Nos
89 45 Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete.
90 45.01 25 to 40 mm nominal bore (18.13.1) 2 Nos
91 46 Providing and fixing single equal plain junction of required degree.
92 46.01 100x100x100mm
93 46.02 Sand cast iron S&S as per IS: - 3989 (17.44.1.2) 2 Nos
94 47 Providing and fixing 100mm sand cast Iron grating for gully trap. (17.29) 4 Nos
95 48 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
96 48.01 100 mm inlet and 100 mm outlet
97 48.02 Sand cast iron S&S as per IS: - 3989\n(17.60.1.1) 6 Nos
98 49 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
99 49.01 Made of G.I. wire of dia 4 mm (16.70.1) 442.5 Sqm
100 50 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
101 50.01 50 mm dia nominal bore (18.10.6) 178.5 mtr
102 51 Painting with aluminium paint of approved brand and manufacture to\ngive an even shade .
103 51.01 Two or more coats on new work. (13.63.1) 442.5 Sqm
104 52 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
105 52.01 5.5 mm thick glass panes (10.30.2) 0.5 sqm
106 53 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80) 135 Sqm
107 54 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
108 54.01 New work (two or more coats) over and including water thinnable priming coat with cement primer (13.41.1) 135 Sqm
109 55 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 13.61.1)
110 55.01 Two or more coats on new work (13.61.1) 42 Sqm
111 56 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead
112 56.01 With cement mortar 1:4(1cement :4 coarse sand) (14.1.2) 4 sqm
113 57 Removing white or colour wash by scrapping and sand papering\nand preparing the surface smooth including necessary repairs to\nscratches etc. complete: 70 sqm
114 58 Carrage of Malba. (Approved Rate) 25 Trip
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail