Prj No . 184/19-20 Pancahayath Office Maintanance
Tender Value
7.14 Lakhs
Estimated cost
Bid Submission
21 Oct 2019
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1792
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kallara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Prj No . 184 / 19-20 Pancahayath Office Maintanance
BOQ
| Work Name:Kallara GP 184/2019-20 Kallara Panchayath office maintenance | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Building maintanance | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001114 | 67.5 | kg |
| 3 | 1.002 | 10.30.1 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :4.0 mm thick glass panes | BI01010001010000000000000515BI0100001115 | 2.43 | sqm |
| 4 | 1.003 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001116 | 408.75 | kg |
| 5 | 1.004 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001117 | 32 | kg |
| 6 | 1.005 | 21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | BI01010001010000000000000515BI0100001118 | 75 | sqm |
| 7 | 1.006 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001119 | 36 | sqm |
| 8 | 1.007 | 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001120 | 2739.71 | sqm |
| 9 | 1.008 | 14.66.1 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface | BI01010001010000000000000515BI0100001121 | 873.63 | sqm |
| 10 | 1.009 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001122 | 2129.66 | sqm |
| 11 | 1.01 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001123 | 134.317 | sqm |
| 12 | 1.011 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001124 | 103.888 | sqm |
| 13 | 1.012 | 18.49.1 : Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | BI01010001010000000000000515BI0100001125 | 8 | each |
| 14 | 1.013 | 14.6.1 : Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001126 | 12.25 | sqm |
| 15 | 1.014 | od267206/2019_2020 : Name board as per bill | BI01010001010000000000000515BI0100001127 | 1 | each |
| 16 | 1.015 | od270379/2019_2020 : Electrification | BI01010001010000000000000515BI0100001128 | 1 | each |
| 17 | 1.016 | od270387/2019_2020 : S/F Name boards of different size as per bill | BI01010001010000000000000515BI0100001129 | 1 | each |
AI Tender Summary
Tender Timeline
Oct 14, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender