| 1 | 1 | Taking down cement plaster on brick / block wall etc. including cranking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed. | | 10 | Sqm |
|---|
| 2 | 2 | Demolition of cement concrete (un-reinforced) in roofs, floors, beams, staircases, landing and similar works complete all as specified and directed. | | 3 | Cum |
|---|
| 3 | 3 | M&L for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of wall as in backing coat complete all as specified and directed. | | 24 | Sqm |
|---|
| 4 | 4 | M&L for 300x200x7 mm thick glazed coloured ceramic tiles on vertical surface of walls set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade complete all as specified and directed. | | 24 | Sqm |
|---|
| 5 | 5 | M&L for 75 mm thick cement concrete PCC 1:4:8 type D 2 using 40 mm graded aggregate as in sub base complete all as specified and directed. | | 40.5 | Sqm |
|---|
| 6 | 6 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate in flooring complete all as specified and directed. | | 40.5 | Sqm |
|---|
| 7 | 7 | M&L for non skid coloured ceramic tiles 7 - 8 mm thick tiles, square / rectangular, area of each tile exc. 0.11 sqm but n exc. 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. | | 101 | Sqm |
|---|
| 8 | 8 | M&L for 15mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and directed. | | 101 | Sqm |
|---|
| 9 | 9 | Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc complete all as specified and directed. | | 63 | Sqm |
|---|
| 10 | 10 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. | | 10 | Sqm |
|---|
| 11 | 11 | Excavation in trenches n exc 1.5m wide and n exc. 1.50 m deep for deep for foundation and getting out in hard/ dense soil complete all as specified and directed. | | 33.2 | Cum |
|---|
| 12 | 12 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. | | 1.05 | Cum |
|---|
| 13 | 13 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 complete all as specified and directed. | | 17.8 | Cum |
|---|
| 14 | 14 | M&L for rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth complete all as specified and directed. | | 16 | Sqm |
|---|
| 15 | 15 | M&L for rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth complete all as specified and directed. | | 20 | Sqm |
|---|
| 16 | 16 | M&L for preparation of newly plastered surface of walls and applying three coats of whitewash complete all as specified and directed. | | 4 | Sqm |
|---|
| 17 | 17 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. | | 20 | Sqm |
|---|
| 18 | 18 | S&F second class hardwood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints, complete all as specified and directed. | | 0.05 | Cum |
|---|
| 19 | 19 | M&L for 30mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. | | 1.5 | Sqm |
|---|
| 20 | 20 | S&F 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. | | 2 | Each |
|---|
| 21 | 21 | S&F 150 mm long aluminium anodised, barrel tower bolts extruded section complete all as specified and directed. | | 2 | Each |
|---|
| 22 | 22 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised, handle fabricated type complete all as specified and diretced. | | 2 | Each |
|---|
| 23 | 23 | M&L for 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and direted. | | 1 | Sqm |
|---|
| 24 | 24 | S&F sheet glass 3mm thick ordinary quality frosted and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified and directed. | | 0.5 | Sqm |
|---|
| 25 | 25 | S&F MS window guard bars, window frames etc articles confirming to Fe-290, Gde E-165 complete all as specified and directed. | | 4 | Kg |
|---|
| 26 | 26 | S&F 75 mm long MS butt hinges, medium weight, cold rolled complete all as specified and directed. | | 6 | Each |
|---|
| 27 | 27 | M&L for preparing new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | | 6.6 | Sqm |
|---|
| 28 | 28 | S&F viterous china wash down water closet pan of orrisa pattern, size of 580x440mm white, with integral foot rests complete all as specified and directed. | | 1 | Each |
|---|
| 29 | 29 | S&F soap dish, any type, fixed to plugwith chromium plated fitted to wall with CP/ brass screws complete all as specified and directed. | | 1 | Each |
|---|
| 30 | 30 | S&F 10 litres PVC, syphonic action type, flushing cistern low level, white with inlet ball valve float chain and pull and brakets complete all as specified and directed. | | 1 | Each |
|---|
| 31 | 31 | S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. | | 1 | RM |
|---|
| 32 | 32 | S&F PVC (SWR) bends any radius with access door, 110 mm dia complete all as specified and directed. | | 1 | Each |
|---|
| 33 | 33 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. | | 1 | Each |
|---|
| 34 | 34 | S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. | | 5 | RM |
|---|
| 35 | 35 | S&F PVC (SWR) bends any radius with access door, 110 mm dia complete all as specified and directed. | | 1 | Each |
|---|
| 36 | 36 | S&F 15 mm GI steel tubes, medium grade with all fittings for water supply fixed to walls complete all as specified and directed. | | 10 | RM |
|---|
| 37 | 37 | S&F 20 mm GI steel tubes, medium grade with all fittings for water supply fixed to walls including taking down old one complete all as specified and directed. | | 1165 | RM |
|---|
| 38 | 38 | S&F 15 mm dia bib taps, fancy type, chromium plated, screwd down , high pressure, screwed both ends for iron pipes or for brass ferrules complete all as specified and directed. | | 24 | Each |
|---|
| 39 | 39 | S&F 15 mm dia stop valves external threaded, cast copper alloy, screwed down high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for unions complete all as specified and directed. | | 2 | Each |
|---|
| 40 | 40 | S&F Wash basins, Vitreous China (flat back or angle back type) of size 550mm x 400mm, including cutting for and pinning in ends of brackets, brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. | | 1 | Each |
|---|
| 41 | 41 | S&F 32 mm LDPE PVC waste pipe for wash hand basin complete all as specified and directed. | | 2 | RM |
|---|
| 42 | 42 | S&F fancy type, cast copper alloy, with capstan heads, chromium plated pillar tap for WHB screwed down for iron pipes of 15mm bore complete all as specified and directed. | | 1 | Each |
|---|
| 43 | 43 | S&F PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and directed. | | 2 | Each |
|---|
| 44 | 44 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. | | 1 | Each |
|---|
| 45 | 45 | S&F looking mirror 600mmx 450mm bevelled edge mirror or selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | | 1 | Each |
|---|
| 46 | 46 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | | 0.6 | Cum |
|---|
| 47 | 47 | M&L for screed bed or bedding layer of 15mm thick for laying floor finish in CM 1:4 complete all as specified and directed. | | 2.5 | Sqm |
|---|
| 48 | 48 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 2.5 | Sqm |
|---|
| 49 | 49 | M&L for 75 mm thick PCC type C-1 , 1:3:6 using 20 mm graded aggregates as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and directed. | | 6.5 | Sqm |
|---|
| 50 | 50 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregates as in bed block complete all as specified and directed. | | 0.15 | Cum |
|---|
| 51 | 51 | Returning / filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in hard/ dense soil complete all as specified and directed. | | 182.23 | Cum |
|---|
| 52 | 52 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. | | 16.67 | Cum |
|---|
| 53 | 53 | M&L for 4mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces complete all as specified and directed. | | 2.5 | Sqm |
|---|
| 54 | 54 | M&L for 50 mm thick 2nd class hardwood clean sawn boarding with butt joints fixed with nails in any situation complete all as specified and directed. | | 0.8 | Sqm |
|---|
| 55 | 55 | M&L for Mild steel flat iron for holdfasts complete all as specified and directed. | | 3 | Kg |
|---|
| 56 | 56 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. | | 27 | Kg |
|---|
| 57 | 57 | S&F of 0.63 mm thick galvanised corrugated mild sheeting with two corrugations side lap, fixed with coach screws and washers in roof walls etc. with grade of zinc coating 275 complete all as specified and directed. | | 6.8 | Sqm |
|---|
| 58 | 58 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any decription complete all as specified and directed. | | 6.8 | Sqm |
|---|
| 59 | 59 | S&F PVC water storage tank of 500 Ltrs capacity rotational moulded, ISI marked (multi layered cylindrical vessel with closed top) hoisted and fixed in position all as specified in SSR Part -I and as directed. | | 5 | Each |
|---|
| 60 | 60 | S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe of 15 mm dia complete all as specified and directed. | | 12 | Each |
|---|
| 61 | 61 | M&L for 150mm dia SGSW pipes, grade 'A' laid in trenches jointed in CM 1:1 complete all as specified and directed. | | 20 | RM |
|---|
| 62 | 62 | M&L for PCC 1:2:4 type D-2 using 40mm graded aggregates in concrete bed to drain pipe including packing under and haunching against the side of pipe of 150 mm bore after they are laid and tested in complete all as specified and directed. | | 20 | RM |
|---|
| 63 | 63 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregates as in benching including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. | | 0.15 | Cum |
|---|
| 64 | 64 | M&L for pre cast RCC 1:2:4 type B-1 as in cover slab for manhole and similar article with plain face set in CM 1:6 complete all as specified and directed. | | 2.66 | Cum |
|---|
| 65 | 65 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | | 205 | Kg |
|---|
| 66 | 66 | M&L for rendering 15 mm thick in CM 1:4 using WPC @ 3 % by weight of cement on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.\nNote : WPC shall be measured and paid separetely. | | 7.5 | Sqm |
|---|
| 67 | 67 | Supply only for integral water proofing compound complete all as specified and directed. | | 0.5 | Kg |
|---|
| 68 | 68 | Extra for forming fair finished drain for channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed. | | 1 | RM |
|---|
| 69 | 69 | S&F PVC (SWR) 75 mm pipe single socketed, in any length for vent pipe complete all as specified and directed. | | 2.5 | RM |
|---|
| 70 | 70 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. | | 1 | Each |
|---|
| 71 | 71 | Supply and Intallation, testing and commissioning of SOLAR HOT WATER SYSTEM (Flat plate collection) based on indirect transferring of heat capacity 1000 litres per day with electric back up (2 KW) flat plate collector, including collector, collector support, screens , controls and instrumentation viz. temperature gauge, stand by electric heaters with electric connection (including heaters control circuitary), internal wiring, minor civil works for foundation and grouting of collector frames as required etc. , works efficiently with hard water with hardness upto 600 ppm and high quality tubes made from boro silicate glass, PUF insulation to ensure that the heat generated is retained for long hours, SS 304 tank with Zinc Alum outer cladding and aluminium support structure complete conforming to IS specification with water piping upto Solar system from nearby SDPE tank for capacity 500 Litres Make : TATA BP SOLAR/ SOLCHROM SYSTEM INDIA LTD/ BHEL/ NILLOY NEM SUN Technologies. | | 7 | Each |
|---|
| 72 | 72 | M&L for hot water pipe duly insulated with 50mm glass wool covered with 1.00 mm Aluminium sheet cladding for hot water supply complete fittings and fixing accessories for 32 mm dia pipe complete all as specified and directed. | | 150 | RM |
|---|
| 73 | 73 | S&F 3 layer 50 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.\nMake : DUTRON/ FINOLEX/ TIRUPATHI | | 100 | RM |
|---|
| 74 | 74 | S&F 3 layer 40 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.\nMake : DUTRON/ FINOLEX/ TIRUPATHI | | 63 | RM |
|---|
| 75 | 75 | S&F 3 layer 32 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.\nMake : DUTRON/ FINOLEX/ TIRUPATHI | | 48 | RM |
|---|
| 76 | 76 | S&F 3 layer 25 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.\nMake : DUTRON/ FINOLEX/ TIRUPATHI | | 42 | RM |
|---|
| 77 | 77 | S&F 3 layer 20 mm dia PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.\nMake : DUTRON/ FINOLEX/ TIRUPATHI | | 71 | RM |
|---|
| 78 | 78 | S&F PP-R Gate valves 40mm bore with iron wheel head screwed both ends complete all as specified and directed. | | 9 | Each |
|---|
| 79 | 79 | S&F PP-R Gate valves 32 mm bore with iron wheel head screwed both ends complete all as specified and directed. | | 7 | Each |
|---|
| 80 | 80 | S&F PP-R Gate valves 25 mm bore with iron wheel head screwed both ends complete all as specified and directed. | | 7 | Each |
|---|
| 81 | 81 | S&F PVC water storage tank of 1000 Ltrs capacity rotational moulded, ISI marked (multi layered cylindrical vessel with closed top) hoisted and fixed in position all as specified in SSR Part -I and as directed. | | 7 | Each |
|---|
| 82 | 82 | Making connection of PP-R distribution branch with PP-R main of 16-40 mm dia by providing and fixing tee including cutting and making fusion joint complete all as specified and directed. | | 12 | Each Job |
|---|
| 83 | 83 | M&L for Point wiring for one 3 pin 15 Amps socket outlet independently drawn from DB located anywhere in the room and including PVC insulated, FRLS grade multi stranded copper conductor 2.50 sqmm 1100 volts graded and wire earth continuity wire 1.50 sqmm PVC insulated copper wire (green) including PVC casing and capping complete all as specified and directed. | | 23 | Per Point |
|---|
| 84 | 84 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete all as specified and directed. | | 19 | Each |
|---|
| 85 | 85 | S&F sheet metal enclosure for DBs when MCBs to be used single pole and neutral 2 way with 200 Amps rated bus bar, 240 volts fixed sunk/ flush to the wall or in niche complete all as specified and directed. | | 7 | Each |
|---|
| 86 | 86 | Supply and laying sub main wiring two single core 4.00 sq mm stranded copper conductor of red & Black colour including 2.50 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing and caping of suitable size for accomadating the wires complete all as specified and directed. \nNote : Two runs of 4 sq mm copper conductor wire, One run of 2.50 sq mm earth continuity conductor and one run of PVC casing and capping shall be measured as a unit. | | 90 | RM |
|---|
| 87 | 87 | M&L for formwork to the soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works exc 200 mm thick (horizontal or sloping) complete all as specified and directed. | | 11.7 | Sqm |
|---|
| 88 | 88 | M&L for rendering 10 mm in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed | | 38.84 | Sqm |
|---|
| 89 | 89 | S&F PVC water storage tank of 500 Ltrs capacity rotational moulded (multi layered cylindrical vessel with closed top) hoisted and fixed in position all as specified in SSR Part -I and as directed. | | 4 | Each |
|---|
| 90 | 90 | S&F MCB SP & N , 240 Volts, 20 Amps complete all as specified and directed. | | 7 | Each |
|---|
| 91 | 91 | Excavation in trenches n exc 1.5m wide and n exc. 1.50 m deep for deep for foundation and getting out in soft/ loose soil complete all as specified and directed. | | 165.6 | Cum |
|---|
| 92 | 92 | S&F gun metal gate valve with iron wheel head , screwed both ends for iron pipe and fixed for size 20mm bore including taking down old one complete all as specified and directed. | | 1 | Each |
|---|
