Military Engineer Services-MES has published Special Repair To S Ttu Hangar Provn Of Galvanised Cable Tray At 251 Su And Provn Of Certain Revenue Works Under Age Br Of Ge ( Af ) Tech Area Kheria Agra. Submission Date for this Tender is 01-11-2019. Galvanized Cable Tenders in GE (AF) (Tech Area) Kheria, Agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: SPECIAL REPAIR TO S&TTU HANGAR, PROVN OF GALVANISED CABLE TRAY AT 251 SU AND PROVN OF CERTAIN REVENUE WORKS UNDER AGE B/R OF GE(AF) TECH AREA , KHERIA AGRA | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling of Steel/ Galvalume sheet (corrugated /semi corrugated) in roof covering/Wall cladding including ridge on any height of Hanger complete all as specified and directed. | 1654 | Sqm | |
2 | 2 | Dismantling structural steel work at any height including doors, gates and framded truss etc. complete all as specified and directed | 20 | Qtl | |
3 | 3 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde-E- 250) Quality 'B' at any height of hanger complete all as specified and directed. | 1200 | Kg | |
4 | 4 | S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall at any height , fixed with self tapping screws and thermal insulation as required comlplete all as specified and directed. | 1624 | Sqm | |
5 | 5 | S&F Pre-painting galvalume aluminum zinc coating GI based Corrugated steel sheet for ridge 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof, plain sheet fixed in covering/cladding to wall, fixed with self tapping screws as specified of any height complete all as specified and directed. . | 284 | Sqm | |
6 | 6 | Preparing new steel surfaces of any description exc 10cm width or grith and applying two coat of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed. | 240 | Sqm | |
7 | 7 | S&F MS rolled section as angle iron/flat iron etc used independently confirming to Fe-410-W (Gde-E- 250) quality 'A' in wind tie of any height of hanger complete all as specified and directed. | 1000 | Kg | |
8 | 8 | Demoliton of brick work or stone masonry built in CM including all quoins arches pillars etc but excl ashlar facing dressed stone works and pre-cast concrete articles complete all as specified and directed. | 38 | Cum | |
9 | 9 | M&L for brick work with fly ash bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed. | 38 | Cum | |
10 | 10 | M&L for 40mm thick precast PCC louvers and jallies in 1:2:4, type B-0 (Using 12.5mm graded stone aggregate) including suitable reinfocement, all moulding etc set in CM 1:4 complete all as specified and directed. | 70 | Sqm | |
11 | 11 | M&L for RCC 1:2:4 type B1(Using 20mm graded stone aggregate) , as in lintel bands over walls etc.complete all as specified and directed. | 3 | Cum | |
12 | 12 | M&L for TMT mild steel bars 10 mm dia over cut to length, bent to shape required and binding wih mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 1150 | Kg | |
13 | 13 | As per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. | 60 | Kg | |
14 | 14 | S&F for 40mm thick Bonded mineral wool blanket slab made from glass density 24kg/cum and fixed as per maker's instructions complete all as specified and directed. | 777 | Sqm | |
15 | 15 | M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 300 | Sqm | |
16 | 16 | Use and waste of form work to sides and soffits of lintels, beams etc with rough finished surface of concrete complete all as specified and directed. | 29 | Sqm | |
17 | 17 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/any metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 Sqm Each complete all as specified and directed. | 7 | Sqm | |
18 | 18 | S&F 5.5mm thick plane glass ordinary quality in square exc 0.5 Sqm each complete all as specified and directed. | 7 | Sqm | |
19 | 19 | Preparing new steel surfaces of any description n.exc 10cm width or grith and applying two coat of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed. | 64 | X RM | |
20 | 20 | M&L for two coat of cement base paint over and including one coat of white cement primer including preparation of new surface of wall complete all as specified and directed. | 300 | Sqm | |
21 | 21 | M&L for preparation of old decorated surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed. | 200 | Sqm | |
22 | 22 | Excavation in soft/loose soil in post holes (or similar holes) each n.exc 0.5 cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around, layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. | 212 | Each | |
23 | 23 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. | 290 | Sqm | |
24 | 24 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed. | 34 | Cum | |
25 | 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. | 30 | Cum | |
26 | 26 | M&L hardcore ( broken stone or boulders) of gauge n. exc 63 mm deposited spread and leveled in layers n. exc 15 cm thick watered and rolled / rammed to a true surface complete all as specified and directed. | 33 | Cum | |
27 | 27 | M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. | 34 | Cum | |
28 | 28 | M&L for reinforced Cement Concrete M-25 (Design mix) (using 20 mm graded stone aggregate) for footings, plinth beam, bases of columns etc. complete all as specified and directed. | 11 | Cum | |
29 | 29 | Use and waste rough finished flat form work to sides of foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; vertical or to batter complete all as specified and directed. | 90 | Sqm | |
30 | 30 | Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as coping etc including use & waste of form work in any position and shape complete all as specified and directed. | 43 | Cum | |
31 | 31 | M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified and as directed. | 6 | Cum | |
32 | 32 | M&L for rubber moulded Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed. | 280 | Sqm | |
33 | 33 | S&F for angle or tee sections fixed independently, without connecting plates etc (cut to ordinary length confirming to Fe-410-W (Gde-E- 250) Quality 'A' omplete all as specified and as directed. | 3600 | Kg | |
34 | 34 | S&F GI wire mesh cable tray made out of 3mm dia GI wire, 0.3m width and 2M length of each tray providing 3 Nos GI wire vertically ,4 Nos GI wire in horizontally and side wing providing with 10 Nos of wire in one side and same in other side complete all as specified and as directed by Engineer-in-Charge. | 520 | RM | |
35 | 35 | S & F mild steel plate 6 mm thick plain, cut to shape forming holes and welded to truss and verticle post all as required complete all as specified and as directed. | 1370 | Kg | |
36 | 36 | S&F mild steel anchoring screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 5 to 10mm and length exc 15cm and n exc 10cm complete all as specified and as directed. | 0.2 | Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail