Repair And Replacement Of Submersible Pump Set And Other Allied Works At Raiwala Under Age ( I ) Raiwala
Tender Value
6 Lakhs
Estimated cost
Bid Submission
23 Oct 2019
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raiwala → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Replacement Of Submersible Pump Set And Other Allied Works At Raiwala Under Age ( I ) Raiwala
BOQ
| Name of Work: Repair and replacement of Submersible Pump set and other allied work at Raiwala under AGE(I) Raiwala | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Lifting of submerssible pump set of any cap from borewell carefully with column pipe of size upto 150 mm dia flanged/socketed GI, 3 mtr each (upto 17 lengths) along with existing submersible electric cable and shifting the pipe aside for reuse as directed by Engr-in-charge. | 1 | Each Job | |
| 2 | 2 | Opening of 100 HP, 1400LPM, 120 mtr headsubmersible pump from the motor, transporting to workshop, dismantling of set, tracing out the defects, and taking out the u/s parts from the pump set, metling, grinding to bring the set in its original position, replacement of neck ring, key set, brass bushes, adjustment nut, thrust plate, coupling bushes, GM ball bush, katcher key set etc, assembling the pump set and testing complete. | 1 | Each job | |
| 3 | 3 | M & L for point wiring with PVC unsheathed, fire resistance, stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed (surface only on roof & colomns) wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessories/fittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with brass screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, complete all as specified & directed for the following. | |||
| 4 | 4 | (a) One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, oneway switch single pole 5/6Amps | 2 | Point | |
| 5 | 5 | (b) All as per item 11(a) but on the same board with other switches /socket. | 2 | Point | |
| 6 | 6 | S &F switch piano flush type white /ivory finish 5/6 Amps, single pole one way complete all as specified & directed. | 4 | Each | |
| 7 | 7 | S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type. | 4 | Each | |
| 8 | 8 | Repair to submersible motor, 440 volts 3 phase as per the following specification and capacity. | 1 | Each Job | |
| 9 | 9 | (a) Opening of submersible motor and cutting to burnt winding and cleaning to slots by cleaning re-agent and repair to damage stator slots. | |||
| 10 | 10 | (b) Rewinding to submersible motor with suitable size of PVC insulated copper winding wire of suitable size of insulating materials all as specified and directed. | |||
| 11 | 11 | (c) Replacement of thrust bearing - 01 No | |||
| 12 | 12 | (d) Replacement of bushes of rotor - 02 Nos | |||
| 13 | 13 | (e) After repairing of motor re-assembling, transporting to P/H, refixing on the same base and testing complete. | |||
| 14 | 14 | Lowering of submerssible pump set of any cap into the borewell carefully with coloumn pipe of size upto 150 mm dia flanged/socketed MS/GI, 3 mtr each length ( 12 to 17 Nos of pipe) along with existing submerssible electric cable binding with GI/AI wire including making joint to submerssible cable all as directed by Engr-in-charge. NOTE :- Rubber gasket, jointing material, nut, bolt, washers shalls be included in in the quoted rate. | 1 | Each Job | |
| 15 | 15 | Repair & overhauling of fully autimatic ATS starter of 100/150 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed by Engineer - in - Charge. Note : Spares will be measured and paid separately | 2 | Each Job | |
| 16 | 16 | Supply and repair fully automatic starter of 100/150 HP with replacement of following items complete all as specified and directed. | |||
| 17 | 17 | (a) Fixed power copper contacts suitable 100/150 HP star delta starter (Set of 9) | 2 | Each | |
| 18 | 18 | (b) Moving power contacts suitable for 100 HP/150 star delta starter (Set of 9) | 2 | Each | |
| 19 | 19 | (c) Overload relay suitable for 100/150 HP | 2 | Each | |
| 20 | 20 | (d) Timer switch for 100/150 HP | 2 | Each | |
| 21 | 21 | (e) No volt coil for 100/150 HP | 2 | Each | |
| 22 | 22 | Supply only in replacement mild steel cold ERW column pipe 10 feet long, 7.20 mm wall thick and 150 mm bore both end flanged end with all fittings suitable for borewell complete all as specified and directed by Engineer-in-charge. Make -Swastik/ Jindal/ Tata.. | 4 | Each Job | |
| 23 | 23 | Supply and fixing in replacement of submersible flat copper cable multistranded 3 core of size 50 sqmm with voltage grade 1100 V complete including connecting and testing complete all as directed by Engr-in-charge. Make polycab , havells, finolex. | 108 | RM | |
| 24 | 24 | Supply and fixing motor protection relay suitable for 100 hp motor for protection of overcurrent, under current, phase loss, phase unblance, phase reversal, locked rotor and ground fault . Make- Cat part no. MP363EZ800, MODEL No.BOCR 3EZ of BCH or equivalent in approved makes. | 1 | Each Job | |
| 25 | 25 | Supply and fixing CT with ratio 200/5 for motor protection relay complete all as directed | 1 | Each Job | |
| 26 | 26 | Supply,installation, testing and commisioning of high pressure single head double tank chlorine dosing system including following accessories | 1 | Each Job | |
| 27 | 27 | (a) Prepration tank of net capacity 170 ltrs, FRP dosing tank dia 650 x net height 375 + conical 300 mm. Gross height with stand 1000 mm consisting of water inlet line, outlet with Y strainer. Drain, overflow, conical bottom for sludge deposition, pot hole with cover, level gauge. Agitator 120 Watt 900 RPM single phase flange mounted motor with plastic shaft and impeller. | |||
| 28 | 28 | (b) Service tank of net capacity 100 ltrs of FRP dosing tank Top dia 540 mm x Bottom dia 480 mm x Height 575 mm consisting of water inlet line, injector dosing pump inlet arrangement, drain, overflow level gauge, inspection port. Agitator 120 watt 900 RPM sigle phase flange mounted motor with plastic shaft and impeller.provision of mounting lid. Make Aquafit of Sree Rayalaseema Hi Strength Hpyo Ltd or equivalent in approved makes. | |||
| 29 | 29 | Supply, fixing, connecting and comissionig in replacement of LT feeder box Indoor type confronting to IS-8623 made of MS sheet 3.15 mm thick , CPRI approved vertical in shape fixed on angle ironbase made of 45 X45X6 MM angle iron grouted in PCC foundation as required at site having busbar chamber with busbar of 600 Amps capacity aluminium strip mounted epoxy bus bar insulator with shutter openable front side and locking arrangement , volt meter square type 0-500 volts and amp meter upto 400 A with selector switch 01 No., indicator lamp neon type - 03 No. with arrangement of fixing of incomming MCCB 400 A - 01 No. , Outgoing MCCB 250 A - 03 No. including cable glans for incoming and outgoing cable, panel duly power coated and prewired with PVC insulated 1100 volts grade multi stranded copper cable of appropriate size including grouting the feeder pillar box in the pillar with necessary bolts, nuts washer and PCC 1;2;4 including connecting items complete and reconnecting the MCCBs and cable with suitable size lug for smooth functioning, complete all as specified and directed by Engineer -in- charge. Note - MCCBs will be measured and paid seperately. | 1 | Each | |
| 30 | 30 | S&F MCCB 4 pole 415 volts, Adjustable type, under protection range 400 Amps, 415 volts of rupturing capacity 50 KA all as specified and directed by Engineer - in - Charge | 1 | Each | |
| 31 | 31 | S&F MCCB 3 pole 415 volts, Adjustable type, under protection range 250 Amps, 415 volts of rupturing capacity 35 KA all as specified and directed by Engineer - in - Charge | 2 | Each |
AI Tender Summary
Tender Timeline
Oct 11, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender