| 1 | 1 | Demolition of wall and ceiling boards (fibre ,pulp ,insulation etc ) or insulation boards /slabs/ blankets any thickness including wall paneling cover fillets or aluminium grid frame work complete all as specified and directed. | BI01010001010000000000000515BI0100001112 | 100 | Sqm |
|---|
| 2 | 1.01 | M&L for 12mm thick Armstrong Scala RH 70 Ceiling board with approved pattern(Make- Armstrong) 600x600mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mmx1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance and making good the dismantling portion complete all as directed. | BI01010001010000000000000515BI0100001113 | 100 | Sqm |
|---|
| 3 | 1.02 | M&L for PVC tiles/ sheets,laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors,2 mm thick , including removal of old PVC sheet from floor surface of any description and any position by brooming down/wire brushing & finally cleaning with compressar and to make the surface dust free before laying of new PVC Sheet , all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 100 | Sqm |
|---|
| 4 | 1.03 | Demolition stone slabs and tiles of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed. | BI01010001010000000000000515BI0100001115 | 12 | X Sqm |
|---|
| 5 | 1.04 | M&L machine pressed precast concrete interlocking paver block Glossy finish any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement with pigment all as specified and directed. | BI01010001010000000000000515BI0100001116 | 50 | Sqm |
|---|
| 6 | 1.05 | -ditto- as per item No 1.04 above but except paver block complete all as specified and directed | BI01010001010000000000000515BI0100001117 | 20 | Sqm |
|---|
| 7 | 2 | M&L sand filling under floors or in foundations including watering and consolidation all as specified and directed. | BI01010001010000000000000515BI0100001118 | 1.25 | Cum |
|---|
| 8 | 3 | M&L for Machine cut KOTA Stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed | BI01010001010000000000000515BI0100001119 | 50 | Sqm |
|---|
| 9 | 4 | Removal of excavated material exc 250m but n.exc 500m and depositing where directed comlete all as directed | BI01010001010000000000000515BI0100001120 | 4.25 | Cum |
|---|
| 10 | 5 | Demolition of cement concrete ( unreinforced) ground floors ,pavings , tile n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed . | BI01010001010000000000000515BI0100001121 | 10.75 | Cum |
|---|
| 11 | 6 | M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in Plinth protection and finishing the surface even & fair complete all as specified and directed. | BI01010001010000000000000515BI0100001122 | 50 | Sqm |
|---|
| 12 | 7 | M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed. | BI01010001010000000000000515BI0100001123 | 50 | Sqm |
|---|
| 13 | 8 | M & L for 40mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) finishing cement concrete surface even & fair,laid in alternate panels all as specified and directed. | BI01010001010000000000000515BI0100001124 | 50 | Sqm |
|---|
| 14 | 8.01 | Forming contraction(Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade 'B' all as directed by Engr in Charge. | BI01010001010000000000000515BI0100001125 | 8 | Ten Rm |
|---|
| 15 | 8.02 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. | BI01010001010000000000000515BI0100001126 | 57 | Sqm |
|---|
| 16 | 9 | M & L for 25 mm thick cement concrete 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) as in sub base complete all as specified and directed. | BI01010001010000000000000515BI0100001127 | 90 | Sqm |
|---|
| 17 | 10 | M&L for 15 mm thick screed bed or bedding in layer of cement mortar for 1:6 for laying floor finishes complete all as specified and directed. | BI01010001010000000000000515BI0100001128 | 140 | Sqm |
|---|
| 18 | 11 | M&L for 10mm thick joint less vitrified ceramic tiles (square/rectangular) light shade area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles complete all as specified and directed. | BI01010001010000000000000515BI0100001129 | 50 | Sqm |
|---|
| 19 | 12 | All as per item no.11 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster1:4 as backing coat complete all as specified and directed. | BI01010001010000000000000515BI0100001130 | 5 | Sqm |
|---|
| 20 | 13 | M&L coloured non skid ceramic tile 7mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed | BI01010001010000000000000515BI0100001131 | 20 | Sqm |
|---|
| 21 | 14 | M&L for joint free coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering cm 1:4 for back coat all as specified and as directed. | BI01010001010000000000000515BI0100001132 | 50 | Sqm |
|---|
| 22 | 15 | M&L for non skid joint free colour ceramic tiles 7-8mm thick (square /Rectangular),area of each tiles exc 0.18Sqm but n.exc 0.38Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 20 | Sqm |
|---|
| 23 | 16 | -ditto- all as per item No 15 above, but in skirting including 10mm thick rendering cm 1:4 for back coat all as specified and as directed | BI01010001010000000000000515BI0100001134 | 2 | Sqm |
|---|
| 24 | 17 | S&F in repair Solar control film 25 micron reflective type sticked to glass panes not exc 1.5 sqm as per instructions of manufacturers including scraping and cleaning of old film complete all as specified and directed. | BI01010001010000000000000515BI0100001135 | 10 | Sqm |
|---|
| 25 | 18 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. | BI01010001010000000000000515BI0100001136 | 8 | Each |
|---|
| 26 | 19 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each complete all as specified and directed. | BI01010001010000000000000515BI0100001137 | 5 | Each |
|---|
| 27 | 20 | S&F including fabrication of aluminium powder coated having minimum thickness of powder coating 50 micron for door/window/ventilator frame , shutters & partition including necessary jointing cleats, glazing clips, aluminium snap beading, rubber neoprene gasket, screws, dash fasteners, rawl plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed.\nNote :- (i) Builders hardware shall be measured and paid separately under respective items.\n(ii) Only weight of aluminium sections shall be measured and paid. No claim what so ever shall be entertained on this account.\n(iii) Thickness of section shall not be more than 3mm.\n(iv) Window shall be fabricated as per requirement with provision for AC/ coller opening. | BI01010001010000000000000515BI0100001139 | 200 | Kg |
|---|
| 28 | 21 | S&F in repair Aluminium grills size exc. 4mm x 4mm and aperture n exc. 80mm incl. fixing with aluminium channel, 1mm thick with steel screw and tint match with existing complete all specified and directed | BI01010001010000000000000515BI0100001140 | 10 | Sqm |
|---|
| 29 | 22 | S&F 12 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice laminations and fixed with aluminium frame work or screws to timber frame work complete all as specified and directed | BI01010001010000000000000515BI0100001141 | 8 | Sqm |
|---|
| 30 | 23 | S&F 5mm thick tinted glass fixed with necessary rubber gasket and match with existing complete all as specified and directed. | BI01010001010000000000000515BI0100001142 | 10 | Sqm |
|---|
| 31 | 24 | S&F 100 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed. | BI01010001010000000000000515BI0100001143 | 20 | Each |
|---|
| 32 | 25 | S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed. | BI01010001010000000000000515BI0100001144 | 20 | Each |
|---|
| 33 | 26 | S&F 100 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed. | BI01010001010000000000000515BI0100001145 | 16 | Each |
|---|
| 34 | 27 | S&F 150 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed. | BI01010001010000000000000515BI0100001146 | 10 | Each |
|---|
| 35 | 28 | S&F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified | BI01010001010000000000000515BI0100001147 | 8 | Each |
|---|
| 36 | 29 | S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified | BI01010001010000000000000515BI0100001148 | 5 | Each |
|---|
| 37 | 30 | S&F 125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified | BI01010001010000000000000515BI0100001149 | 30 | Each |
|---|
| 38 | 31 | S&F aluminium extruded section body door closer hydraulically regulated , designation N0-3, universal type , suitable for door shutter of 851 to 1000 mm in width and od weight 61 to 80 kg ( ISI marked) complete all as specified and directed. | BI01010001010000000000000515BI0100001150 | 5 | Each |
|---|
| 39 | 32 | S&F mortice lock (ISI Marked) of brass of size 65mm , 4 lever , vertical type fixed to door, complete all as specified and directed. | BI01010001010000000000000515BI0100001151 | 5 | Each |
|---|
| 40 | 33 | M&L double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover , governing pivot made of aluminium , other parts made of mild steel heavy duty and fixed in door in floor for fixing of machine and make good in affected area , complete all as specified and directed. | BI01010001010000000000000515BI0100001152 | 3 | Each |
|---|
| 41 | 34 | Hacking out old broken glass pane(any thickness),size,quality or description from wooden frames or steel,concrete or brick sorrounds glazed with putty or fixed with beads etc all as specified and as directed. | BI01010001010000000000000515BI0100001153 | 10 | Sqm |
|---|
| 42 | 35 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed. | BI01010001010000000000000515BI0100001154 | 10 | Sqm |
|---|
| 43 | 36 | S&F in repair galvanised mild steel wire cloth 0.50mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including fixed in repairs complete all as specified and directed. | BI01010001010000000000000515BI0100001155 | 10 | Sqm |
|---|
| 44 | 37 | M&L for Rough excavation not exceeding 1.5M deep and getting out soft/loose soil complete all as specified and as directed. | BI01010001010000000000000515BI0100001156 | 800 | Cum |
|---|
| 45 | 38 | Removing excavated material exc 1.5 KM but n;exc 5KM and depositing where directed. | BI01010001010000000000000515BI0100001157 | 800 | Sqm |
|---|
| 46 | 39 | Forming embankments and traverses including raising(or lowering) earth,spreding in layers n:exc 30 cm thick , watering,ramming/rolling and finishing to required size,shape,etc n, exc 6.00 M high from base complete all as specified and directed. | BI01010001010000000000000515BI0100001158 | 800 | Cum |
|---|
| 47 | 40 | Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n'exc 30 cm girth and removing the material exc 500m and n exc 1 KM complete all as specified and directed. | BI01010001010000000000000515BI0100001159 | 20000 | Sqm |
|---|
| 48 | 41 | Clearing and cleaning of sides/bottom of the existing drains/nallahas and berms of drains, roads/path etc of any description and in any position, by cutting all bushes, shrubs, sarkandas and any other types of vegetations and trees girth upto 30 cm and trimming the earth surface to make good side cuts / surface soil depression , removing and disposal of the waste retrived from site clearance to make free and smooth flow of water and to get a uniform slope complete all as specified and directed. | BI01010001010000000000000515BI0100001160 | 10000 | Sqm |
|---|
| 49 | 42 | M&L for desilting/removing of earth deposits from the drains/nallahas / trenches etc of any description & in any position, getting out and disposal of earth complete all as specified and as directed.\n(Note:- Nature of silt/earth deposits in the drains/ nallahas is soft / loose and sandy soil. | BI01010001010000000000000515BI0100001161 | 300 | Cum |
|---|
| 50 | 43 | S&F for desilting/ removing of earth deposits etc from covered drains/ culverts, hume pipe culvert etc of any description and in any position, getting out and disposal of earth complete all as specified and directed.\n(Note : Nature of silt/ earth deposits in the drains/ anallah is soft/ loose and sand soild). | BI01010001010000000000000515BI0100001162 | 50 | Cum |
|---|
| 51 | 44 | Dismantling of asbestos cement/ (corrugated or semi corrugated etc) sheet / galvalume sheet (any type ) in roof covering including ridges complete all as specified and directed. | BI01010001010000000000000515BI0100001163 | 150 | Sqm |
|---|
| 52 | 45 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwss complete as specified and directed. | BI01010001010000000000000515BI0100001164 | 30 | Sqm |
|---|
| 53 | 46 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwss complete as specified and directed. | BI01010001010000000000000515BI0100001165 | 100 | Sqm |
|---|
| 54 | 47 | All as Item No 46 above but except sheet complete all as specified and directed. | BI01010001010000000000000515BI0100001166 | 20 | Sqm |
|---|
| 55 | 48 | Anti termite treatment of voids in masonry using chemical emulsion one litre per hole,at 300mm intervals including drilling holes at 45degree and replugging them with cement mortor1:2 (1cement :2 coarse sand) to match the existing floors complete all as specified and directed. | BI01010001010000000000000515BI0100001167 | 50 | Sqm |
|---|
| 56 | 49 | Anti termite treatment at points of contact of wood work by chemical emulsion(in oil or kerosene based solution )@0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and as directed. | BI01010001010000000000000515BI0100001168 | 50 | Rm |
|---|
| 57 | 50 | Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc and prepared to the plaster complete all as specified and directed. | BI01010001010000000000000515BI0100001169 | 300 | Sqm |
|---|
| 58 | 51 | Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed. | BI01010001010000000000000515BI0100001170 | 40 | Cum |
|---|
| 59 | 52 | M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed. | BI01010001010000000000000515BI0100001171 | 10 | Cum |
|---|
| 60 | 53 | Description same all as per item No 52 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed. | BI01010001010000000000000515BI0100001172 | 3 | Cum |
|---|
| 61 | 54 | M&L for stone walling of random rubble masonry uncourse, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed. | BI01010001010000000000000515BI0100001173 | 20 | Cum |
|---|
| 62 | 55 | Description same all as per item No 54 above but, except stone complete all as specified and directed.\n(Note :- Old retrieved stones obtained from demolition in serviceable condition shall be used in the work). | BI01010001010000000000000515BI0100001174 | 7 | Cum |
|---|
| 63 | 56 | M&L for 15 mm thick rendering on fair face of brick walls in CM (1:4) surface finished even and fair complete all as specified and directed. | BI01010001010000000000000515BI0100001175 | 200 | Sqm |
|---|
| 64 | 57 | M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed by Engr-in-Charge | BI01010001010000000000000515BI0100001176 | 200 | sqm |
|---|
| 65 | 58 | M&L for flush pointing to random rubble masonry/stone walling in cement mortar (1:4) complete all as specified and directed. | BI01010001010000000000000515BI0100001177 | 10 | X Sqm |
|---|
| 66 | 59 | M&L for two coat of distemper oil emulsion to newly plastered surfaces of walls including preparation of surface over one coat of primer over a coat of wall putty , complete all as specified and directed. | BI01010001010000000000000515BI0100001178 | 100 | Sqm |
|---|
| 67 | 60 | M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying 1mm thick wall care putty (Make: Birla/JK) on wall and applying two coats distemper oil emulsion, white or tinted as approved complete all as specified and directed. . | BI01010001010000000000000515BI0100001179 | 100 | Sqm |
|---|
| 68 | 61 | M & L preparation of new plastered surface and applying two coat of Apex paint over a coat of primer on external wall all as spd & directed | BI01010001010000000000000515BI0100001180 | 100 | Sqm |
|---|
| 69 | 62 | M&L for Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. | BI01010001010000000000000515BI0100001181 | 50 | Sqm |
|---|
| 70 | 63 | M&L for Preparation of old decorated surfaces of ceilings including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. | BI01010001010000000000000515BI0100001182 | 50 | Sqm |
|---|
| 71 | 64 | M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | BI01010001010000000000000515BI0100001183 | 50 | Sqm |
|---|
| 72 | 65 | M&L for preparation of surfaces of wood and wood based materials of any description, width or girth including cleaning and a coat of wood filler on old works and applying french polish in one or more coats to the required texure and glossy finish complete all as specified and directed. | BI01010001010000000000000515BI0100001184 | 50 | Sqm |
|---|
| 73 | 66 | M&L for preparation of old painted surface and applying one coats of aluminium paint on steel surface of any description over 10cm in width or girth completed all as specified and directed. | BI01010001010000000000000515BI0100001185 | 50 | Sqm |
|---|
| 74 | 67 | M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint, white or tinted as approved complete all as specified and directed. | BI01010001010000000000000515BI0100001186 | 50 | Sqm |
|---|
| 75 | 68 | M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint complete all as specified and directed [Make:-'Apex Paint' of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE]. | BI01010001010000000000000515BI0100001187 | 150 | Sqm |
|---|
| 76 | 69 | Dismantling mild steel work of any description not other wise provided for complete all as specified and directed. | BI01010001010000000000000515BI0100001188 | 6 | Qtl |
|---|
| 77 | 70 | S&F frames work such as door and gates of angle or other section with gusset plates, rails , braces , etc complete drilled for fixing of steel sheeting or other covering , doors, etc to be prepared for hanging of sliding with and including either hooks and hinges or steel hanging door fitting ( exclusive of steel sheeting or other covering , running rails and guids ) and hanging also fastening and fixing ,complete Fe -410-0 or Fe 310-0 , all as specified and directed. | BI01010001010000000000000515BI0100001189 | 300 | Kg |
|---|
| 78 | 71 | S&F frames work of angles or tees with web and flanges cut to shape , drilled and counter sunk for screw , including bending and welding angles as necessary gusset plates , riveting , etc such as purlin , rafters , post etc confirming to Fe -290 Gde -E- 165 , complete all as specified and directed. | BI01010001010000000000000515BI0100001190 | 300 | Kg |
|---|
| 79 | 72 | M&L for MS work for wind tie in roofs and similar work including securing bolts , drilling hole etc confirming to Fe- 290 Gde E-165 complete all specified and directed. | BI01010001010000000000000515BI0100001191 | 30 | Kg |
|---|
| 80 | 73 | M&L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. | BI01010001010000000000000515BI0100001192 | 50 | Sqm |
|---|
| 81 | 74 | M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | BI01010001010000000000000515BI0100001193 | 100 | Sqm |
|---|
| 82 | 75 | M &L for preparing new painted steel & iron surfaces of any description n.exc over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. | BI01010001010000000000000515BI0100001194 | 10 | 10 Rm |
|---|
| 83 | 76 | M&L for preparing old painted steel & iron surfaces of any description n.exc over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | BI01010001010000000000000515BI0100001195 | 10 | 10 Rm |
|---|
| 84 | 77 | Demolition of cement concrete (unreinforced) ground floors and pavings of any description and in any position n. exc 15 cm thick below or above G.L including removing and disposal complete all as specified and directed . | BI01010001010000000000000515BI0100001196 | 10 | Cum |
|---|
| 85 | 78 | M&L for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in surface channel and drain bed complete all as specified made to shape and size as directed. | BI01010001010000000000000515BI0100001197 | 7 | Cum |
|---|
| 86 | 79 | M&L for PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed. | BI01010001010000000000000515BI0100001198 | 3 | Cum |
|---|
| 87 | 80 | Extra for forming fair finish drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stooped ends etc complete all as specified and directed. | BI01010001010000000000000515BI0100001199 | 50 | RM |
|---|
| 88 | 81 | Add or deduct item No 80 for each 25mm girth over and under 30mm or part there. | BI01010001010000000000000515BI0100001200 | 175 | RM |
|---|
