Special Repair To Building No . T425 , T428 , T429 And T581 At Leimakhong Mil Stn
Tender Value
18.40 Lakhs
Estimated cost
Bid Submission
29 Oct 2019
0 days left
EMD
36800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LEIMAKHONG → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Building No . T425 , T428 , T429 And T581 At Leimakhong Mil Stn
BOQ
| Name of Work: SPL REP TO BLDG NO. T-425, T-428, T-429 & T-581 AT LEIMAKHONG MIL STN | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | B/R work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed. | 235 | SQM | |
| 3 | 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | 8.35 | QTL | |
| 4 | 4 | Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed. | 1.87 | CUM | |
| 5 | 5 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. | 140 | SQM | |
| 6 | 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. | 181 | SQM | |
| 7 | 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing all unserviceable materials from site complete all as specified and directed. | 5 | EACH | |
| 8 | 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 7 | EACH | |
| 9 | 9 | Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 3 | EACH | |
| 10 | 10 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. | 5 | SQM | |
| 11 | 11 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. | 8.85 | CUM | |
| 12 | 12 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. | 29 | SQM | |
| 13 | 13 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. | 13.97 | CUM | |
| 14 | 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. | 26 | SQM | |
| 15 | 15 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed. | 94 | SQM | |
| 16 | 16 | Ditto all as per Sl item No. 15.00 here-in-above but except sheeting (NOTE: Seviceable 0.63mm thick galvanised corrugated mild steel/plain sheets obtained from dismantling under Sl item No 2.00 here-in-before shall be reused under the item) | 26 | SQM | |
| 17 | 17 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 10 | SQM | |
| 18 | 18 | S&F 0.80mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 5 | SQM | |
| 19 | 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 95 | SQM | |
| 20 | 20 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified. | 5 | SQM | |
| 21 | 21 | S&F MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | 520 | KG | |
| 22 | 22 | M&L for MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | 280 | KG | |
| 23 | 23 | M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) all as specified and directed. | 35 | KG | |
| 24 | 24 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | 1.67 | CUM | |
| 25 | 25 | Ditto all as per Sl item No. 24.00 here-in-above but except scantling (NOTE: Seviceable wooden scantling obtained from dismantling under Sl item No 4.00 here-in-before shall be reused under the item) | 0.2 | CUM | |
| 26 | 26 | M&L for preparing of new wooden surfaces of any description and girth, not otherwise described and treated with a coat of creosote oil complete all as specified and directed. | 90 | SQM | |
| 27 | 27 | M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed. | 140 | SQM | |
| 28 | 28 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | 131 | SQM | |
| 29 | 29 | Fixing only in repairs non asbestos fibre cement building board of any thickness fixed or laid/inserted to timber or GI/Aluminium framework with screws complete all as specified and directed. (NOTE: Serviceable boards obtained from dismantling under Serial item No. 06 here-in-above shall be reused under this item.) | 50 | SQM | |
| 30 | 30 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic (red) roof paint over a coat of red oxide primer complete all as specified and directed. | 43.76 | SQM | |
| 31 | 31 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 26 | SQM | |
| 32 | 32 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying a coat of red oxide primer complete all as specified and directed. | 25 | SQM | |
| 33 | 33 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 0.6 | CUM | |
| 34 | 34 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 16.3 | SQM | |
| 35 | 35 | S&F 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 3 | SQM | |
| 36 | 36 | S&F for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed. | 16.3 | SQM | |
| 37 | 37 | S&F for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed. | 14 | SQM | |
| 38 | 38 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | 225 | SQM | |
| 39 | 39 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. | 9 | SQM | |
| 40 | 40 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | 20 | SQM | |
| 41 | 41 | S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed. | 5 | SQM | |
| 42 | 42 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed. | 4 | EACH | |
| 43 | 43 | S&F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed. | 4 | EACH | |
| 44 | 44 | Supply only 50mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 4 | EACH | |
| 45 | 45 | S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 18 | EACH | |
| 46 | 46 | S&F 75mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 58 | EACH | |
| 47 | 47 | S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 24 | EACH | |
| 48 | 48 | S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 34 | EACH | |
| 49 | 49 | S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. | 28 | EACH | |
| 50 | 50 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. | 34 | EACH | |
| 51 | 51 | S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed. | 28 | EACH | |
| 52 | 52 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. | 6 | EACH | |
| 53 | 53 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | 5.5 | CUM | |
| 54 | 54 | Ditto all as per Sl item No. 53.00 here-in-above but except brick (NOTE: Seviceable brick obtained from demolition under Sl item No 11.00 here-in-before shall be reused under the item) | 1.05 | CUM | |
| 55 | 55 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. | 20 | SQM | |
| 56 | 56 | M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formworkcomplete all as specified and directed. | 0.22 | CUM | |
| 57 | 57 | M&L rendering 15mm thick on fair faces of brick work in CM 1:4 using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified.\n(Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)\n | 42 | SQM | |
| 58 | 58 | M&L rendering 15mm thick on other than fair faces of brick work in (CM) 1:4 using water proofing compound @2% by weight of cement as per manufacture instruction and finishing even and smooth without using extra cement complete all as specified and directed.\n(Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)\n | 28 | SQM | |
| 59 | 59 | Supply only intergral water proofing compound. | 11.12 | KG | |
| 60 | 60 | M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 40 | SQM | |
| 61 | 61 | M & L for rendering 10mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 4 | SQM | |
| 62 | 62 | M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 14 | SQM | |
| 63 | 63 | M&L preparation of new or previously plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. | 4 | SQM | |
| 64 | 64 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | 70 | SQM | |
| 65 | 65 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | 54 | SQM | |
| 66 | 66 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete as specified and directed. | 5 | SQM | |
| 67 | 67 | M&L 75mm thick PCC M-7.5 grade (Nominal Mix) using 40mm graded crushed stone aggregate as sub base finishing surfaces even and fair complete all as specified and directed. | 15 | SQM | |
| 68 | 68 | M&L 25mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and fair to receive floor tiles complete all as specified and directed. | 30 | SQM | |
| 69 | 69 | M&L 40mm thick PCC M-15 grade (Nominal Mix) using 40mm graded crushed stone aggregate in floor, finishes even and fair to receive floor tiles complete all as specified and directed. | 49 | SQM | |
| 70 | 70 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | 79 | SQM | |
| 71 | 71 | M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. | 79 | SQM | |
| 72 | 72 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed. | 26 | SQM | |
| 73 | 73 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. | 32 | SQM | |
| 74 | 74 | M&L for forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. | 2 | X RM | |
| 75 | 75 | M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed. | 0.2 | CUM | |
| 76 | 76 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. | 25 | RM | |
| 77 | 77 | Add or deduct for each 25 mm girth or part thereof over or under 30cm against Item No 76 above and ditto (For adjustment only) | 25 | RM | |
| 78 | 78 | M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | 12 | SQM | |
| 79 | 79 | M&L for precast chequered cement concrete tiles 30cm x 30cm x 25mm thick conforming to IS 13801-1993, set, jointed in neat cement slurry and pointed with grey cement and pigment as in floors complete all as specified and directed. | 12 | SQM | |
| 80 | 80 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. | 22 | RM | |
| 81 | 81 | M&L for preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and directed. | 74 | SQM | |
| 82 | 82 | M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. | 68 | SQM | |
| 83 | 83 | M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. | 185 | SQM | |
| 84 | 84 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 42 | SQM | |
| 85 | 85 | E/M WORK | BI01010001010000000000000515BI0100001218 | ||
| 86 | 86 | Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed. | BI01010001010000000000000515BI0100001219 | 128 | POINT |
| 87 | 87 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) | BI01010001010000000000000515BI0100001220 | ||
| 88 | 87.01 | One light/fan point controlled by one, one way switch | BI01010001010000000000000515BI0100001221 | 84 | POINT |
| 89 | 87.02 | One socket outlet 5 Amps 5 pin on independent board | BI01010001010000000000000515BI0100001222 | 23 | POINT |
| 90 | 87.03 | One socket outlet 5 Amps 5 pin on same board with other switches | BI01010001010000000000000515BI0100001223 | 8 | POINT |
| 91 | 88 | All as per item No. 87 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. | BI01010001010000000000000515BI0100001224 | 13 | POINT |
| 92 | 89 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. | BI01010001010000000000000515BI0100001225 | 115 | EACH |
| 93 | 90 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. | 13 | EACH | |
| 94 | 91 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. | 31 | EACH | |
| 95 | 92 | S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed. | BI01010001010000000000000515BI0100001228 | 13 | EACH |
| 96 | 93 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. | BI01010001010000000000000515BI0100001229 | 84 | EACH |
| 97 | 94 | S&F modular white cover with frame for fixing of 4 module. | BI01010001010000000000000515BI0100001230 | 38 | EACH |
| 98 | 95 | S&F modular white cover with frame for fixing of 12 module. | BI01010001010000000000000515BI0100001231 | 8 | EACH |
| 99 | 96 | S&F blank spacer plate for single module. | BI01010001010000000000000515BI0100001232 | 19 | EACH |
| 100 | 97 | S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed. | BI01010001010000000000000515BI0100001233 | 15 | EACH |
| 101 | 98 | Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed. | BI01010001010000000000000515BI0100001234 | 4 | EACH |
| 102 | 99 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter) | BI01010001010000000000000515BI0100001235 | 4 | EACH |
| 103 | 100 | S&F MCB single pole and neutral 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | BI01010001010000000000000515BI0100001237 | 4 | EACH |
| 104 | 101 | S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | BI01010001010000000000000515BI0100001238 | 24 | EACH |
| 105 | 102 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed. | BI01010001010000000000000515BI0100001239 | 4 | EACH |
| 106 | 103 | Taking down old unserviceable light fitting of any type and in any situation complete all as directed. | BI01010001010000000000000515BI0100001240 | 61 | EACH |
| 107 | 104 | S&F universal batten for G13 T8 lamps (LED TUBE),1200mm long complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Regal Batten Cat No.REGALBATTENT8UPTO1X22WSSBSWH or equivalent in Philips/ Bajaj/ Crompton) | 41 | EACH | |
| 108 | 105 | S&F ultra bright LED polycarbonate tublight 20W, 1213mm long with very high efficacy suited for installation T8 tublight with G13 lamp holders, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.\n(Make: Photon Ultra LED tublight Havells Cat No.PHOTONULTRA1213T8SSTL20WLED865SPC/ Philips/Bajaj/CG) | BI01010001010000000000000515BI0100001241 | 41 | EACH |
| 109 | 106 | S&F wall mounted decorative light fixture made up of polycarbonate suitable for and including 10W CFL/LED lamp complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.\n(Make: Philips Nova B22/1X10W LED/ Havells/Bajaj/CG) | 10 | EACH | |
| 110 | 107 | S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting including taking down complete all as specified and directed.\n(Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC/ Bajaj/Philips/CG) | 6 | EACH | |
| 111 | 108 | M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one 10W LED complete all as specified and directed.\n(Make : Holder - ISI product of ANCHOR/ Legrand/ Havells, Lamp - Bajaj/ Philips/ Havells) | BI01010001010000000000000515BI0100001244 | 4 | EACH |
| 112 | 109 | Taking down old unserviceable service cable including batten/suspending wires complete all as directed. | BI01010001010000000000000515BI0100001245 | 215 | RM |
| 113 | 110 | S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed. | BI01010001010000000000000515BI0100001246 | 215 | RM |
| 114 | 111 | Taking down house service bracket from wall, rooftops and making good disturbed surface complete all as specified. | 1 | EACH | |
| 115 | 112 | S&F House service bracket (hook type) complete with 3 meter long GI pipe 40 mm dia medium grade, two Nos 90 degree bends, MS hook and stay or guy complete and making good disturbed surfaces complete all as specified and directed. | 1 | EACH | |
| 116 | 113 | Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as directed. | BI01010001010000000000000515BI0100001249 | 23 | EACH |
| 117 | 114 | Hanging only/ Refixing ceiling fan removed under item Srl No 113 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed. | 23 | EACH | |
| 118 | 115 | Taking down geyser and refixing including new PVC connections-02 nos, clamps, nuts & bolts etc complete all as specified and directed. | 1 | EACH | |
| 119 | 116 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. | BI01010001010000000000000515BI0100001252 | 4 | EACH |
AI Tender Summary
Tender Timeline
Oct 10, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 31, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender