Supplying And Fixing Of Retro Reflective Signages And Speed Calming Measures At Black Spot Accident Prone Area On Various Package Roads In Rajasthan Developed By Ridcor/Ripl
Tender Value
1.13 Crore
Estimated cost
Bid Submission
17 Oct 2019
0 days left
EMD
2.26 Lakhs
Bank guarantee accepted
Document Fee
29500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
As per technical bid document → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying And Fixing Of Retro Reflective Signages And Speed Calming Measures At Black Spot Accident Prone Area On Various Package Roads In Rajasthan Developed By Ridcor / Ripl
BOQ
| Name of Work: Supplying and fixing of retro reflective signages & speed calming measures at Black Spot accident prone area on various package roads in Rajasthan developed by RIDCOR/RIPL | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C \n(a) Lane, Centreline, Edge ,pedestrian crossing markings and other marking along strips for 5 mm thickness of marking(excluding drop on glass beads) | item1 | 5775 | Sqm |
| 2 | 2 | Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C \n(a) Directional arrows, letters and marking as per drawing and specifications | item2 | 500 | Sqm |
| 3 | 3 | Providing and fixing of retro-reflectorised Signs made out of 2 mm thick aluminium sheet bolted & welding on MS angle iron frame of size 40x40x5 mm, back side of plate is painted in two coats of epoxy grey paint after etching treatment of plate on both sides.The face of aluminium sheet is fully covered by retro reflective sheeting , having the coefficient of retro reflection determined in accordance with Type-XI, Class-1 ASTM D 4956_ 01a standards and letter / matter in similar type of sheeting or cut out in overlay film.This structure has fixing provisions to posts of M.S. pipe 75mm OD heavy duty(with hold fast of size 30 to 40 cm at bottom)(duly painted in alternate bands of 25 cms.black and white with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and duly welded to backframe of sign plate, firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete minimum60 cm x 60 cm x 75 cm below ground level as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications Clause 801 including Supply & Fixing of cage for covering the New sign board madeup of 3.1 mm thick M.S. welded wire mesh has an opening size 50 mm X 50 mm. (duly painted in black with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and cage will duly welded to backframe of sign plate, as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications and as directed by the Engineer.\n(a) Size 600 X 900 mm 2 Pipe upto top of frame( Total pipe Ht. 3.3Mtr Apprxox Wt. of 1 Pipe 18Kg) | item3 | 77 | Nos. |
| 4 | 4 | Providing and fixing of retro-reflectorised Signs made out of 2 mm thick aluminium sheet bolted & welding on MS angle iron frame of size 40x40x5 mm, back side of plate is painted in two coats of epoxy grey paint after etching treatment of plate on both sides.The face of aluminium sheet is fully covered by retro reflective sheeting , having the coefficient of retro reflection determined in accordance with Type-XI, Class-1 ASTM D 4956_ 01a standards and letter / matter in similar type of sheeting or cut out in overlay film.This structure has fixing provisions to posts of M.S. pipe 75mm OD heavy duty(with hold fast of size 30 to 40 cm at bottom)(duly painted in alternate bands of 25 cms.black and white with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and duly welded to backframe of sign plate, firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete minimum60 cm x 60 cm x 75 cm below ground level as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications Clause 801 including Supply & Fixing of cage for covering the New sign board madeup of 3.1 mm thick M.S. welded wire mesh has an opening size 50 mm X 50 mm. (duly painted in black with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and cage will duly welded to backframe of sign plate, as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications and as directed by the Engineer.\n(a) 900 mm triangle (Total pipe Ht. 3.3 Mtr Apprxox Wt. of 1 Pipe 18 Kg) | item4 | 103 | Nos. |
| 5 | 5 | Providing and fixing two way reflective raised road studs with anchor with 1-shank and 2x43 pieces reflective elements 19 degree tilted etc. complete at 18m to 36 m centre to centre on edge lanes, lane lines and 1 m centre to centre on pedestrian crossings including fixing, cost of conveyance of all materials to site including labour and hire charges for machineries involved etc., complete as per Standard Specifications and directions of the Engineer.\nAluminium Body (Swareflex) | item5 | 3758 | Nos. |
| 6 | 6 | Rumble strips : As per MoRTH Circular No. RW/NH33037/01/2016 S&R (R) dated 29/8/2016 : Supplying and installation of plastic rumble strip made of poly ethlyne material with rectanguar shape in HEXACORE DESIGN. The size of Rumble strips should be length 500 mm width 200 mm and height 15 mm with loading capacity/ compressive strength 25 Ton. The high intensity prismatic tapes colour red/yellow should be fixed on the core of rumble strip for night vision. Fixing will be by drilling holes on the road with nails (size 8mm thickness and length 75mm) and using epoxy resin based adhesiv. | item6 | 7224 | Each |
AI Tender Summary
Tender Timeline
Oct 07, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 18, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender