Sales : +91-777 804 8217
| Name of Work: PROVISION OF LANDSCAPING AND ARBORICULTURE AT RAYANG, ARUNACHAL PRADESH UNDER CCE (ARMY) NO 1, DINJAN | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | GENERAL | |||
| 2 | 1.01 | Surface esxcavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed. | 1000 | Sqm | |
| 3 | 2 | Excavation over areas n.exc 1.5 metre in depth and exc 10 Square metre on plan in soft/loose soil for foundation and getting out complete all as specified and directed. | 1500 | Cum | |
| 4 | 3 | Excavating over areas, exc 1.5m but n exc 3.0m deep and exc 10 Square metre on plan and getting out soft / loose soil complete all as specified and directed. | 150 | Cum | |
| 5 | 4 | Excavation in foundation trenches or drains of depth not exc 1.5m including taking out, dressing/trimming side and leveling/grading and ramming of bottom complete all as specified and directed. | 3300 | Cum | |
| 6 | 5 | Earth filling including spreading and levelling in layers not exc 25 cm thick and well ramming including watering as required complete all as specified and directed. | 60 | Cum | |
| 7 | 6 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25cm in depth, consolidating each deposited layer by ramming and watering complete all as specified and directed. | 1800 | Cum | |
| 8 | 7 | Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. | 3300 | Cum | |
| 9 | 8 | M&L for forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering ramming/rolling and finishing to required size, shape etc n exc 1.5m high base complete all as specified and directed. | 100 | Cum | |
| 10 | 9 | M&L for cement concrete 1:4:8 type D-1 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. | 160 | Cum | |
| 11 | 10 | Materials and Labour for plain cement concrete (1:2:4) Type B-2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and directed. | 25 | Cum | |
| 12 | 11 | M&L 40mm thick red sand stone slab flooring, laid over screed bed with and including 20mm thick CM 1:4 complete all as specified and directed. | 450 | Sqm | |
| 13 | 12 | M&L 20mm thick Granite (of any type) machine cut, laid in floor including 20mm thick screed bed in CM 1:4, jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone, including grinding and polishing complete all as specified and directed. | 110 | Sqm | |
| 14 | 13 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rough finish plaster in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match shade of slab including grinding, rubbing and polishing complete all as specified and directed. | 275 | Sqm | |
| 15 | 14 | M & L of 20mm thick Dholpur Stone slab in riser of steps, on skirting, on cladding etc laid over 10mm thick rough finished surfaces plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and directed. | 160 | Sqm | |
| 16 | 15 | M & L of 20mm thick red sand stone slab in riser of steps, on skirting, on Cladding etc laid over 10mm thick rough finished surfaces plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and directed. | 90 | Sqm | |
| 17 | 16 | M & L for 20mm thick white marble laid in floor and including 20mm thick screed bed in CM 1:4 jointed with grey cement and pointed with white cement with admixture of pigment to match the shade of marble including grinding and polishing complete all as specified and directed. | 80 | Sqm | |
| 18 | 17 | M & L for 20mm thick black marble/ any colour approved by PM laid on skirting /dado/any vertical surface and including 10mm thick plaster in CM 1:4 jointed with grey cement and pointed with white cement with admixture of pigment to match the shade of marble including grinding and polishing complete all as specified and directed. | 90 | Sqm | |
| 19 | 18 | M&L 20-25 mm thick machine cut Red Karauli sand stone slab as in wall cladding over cement including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. | 100 | Sqm | |
| 20 | 19 | M&L 40 mm thick rough dressed white sand stone slab flooring, laid with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. | 650 | Sqm | |
| 21 | 20 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels including provided required camber and finishing the top surfaces of cement concrete even and smooth without using extra cement complete all as specified and directed. | 50 | Sqm | |
| 22 | 21 | M & L hardcore of gauge n exc. 63 mm of broken stone, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 130 | Cum | |
| 23 | 22 | M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. | 310 | Cum | |
| 24 | 23 | M&L for rendering 10mm thick in CM 1:4 on brick/PCC block/RCC/concrete surface of internal/External faces of wall with and including finishing the surface even and smooth without using extra cement complete all as specified and directed. | 50 | Sqm | |
| 25 | 24 | Providing and fixing 50MM rounded stone PEBBLES of approved quality, shade etc as per design complete all as specified and directed. | 100 | Sqm | |
| 26 | 25 | M&L treating the backfill in contact with foundation with ATT at the rate of 7.5 Ltr of emulsion per square meter of vertical surface (area of the substructure in contact with backfill to be measured ) complete all as specified and directed. | 18 | Sqm | |
| 27 | 26 | M&L for ATT and treating the top surface of filled earth @ 5.0 ltr of emulsion per sqm of surface complete all as specified and directed. | 200 | Sqm | |
| 28 | 27 | S&F structural steel work FE-401 W (Grade E-250 grade A) as in roof trusses (framed) & vertical posts, purlins, crane gantries, rails, fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleat etc complete all as specified and directed. | 8000 | Kg | |
| 29 | 28 | S&F compound girdeds and stainchions, lattice girders, aerial masts,staging for water tanks and the like including caps bases,splices etc.built up from two or more beam or channel section or angles with plates including all lattice bars, stiffeners, Gussets plates etc. complete all as specified and directed. | 300 | Kg | |
| 30 | 29 | S&F mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm long complete all as specified and directed. | 20 | Kg | |
| 31 | 30 | M & L for preparation of newly steel surface of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 50 | Sqm | |
| 32 | 31 | M & L of 20mm thick seasoned and polished Teak wood cladding fixed on channel section columns as shown on Drg, complete all as specified in Drg and directed. | 70 | Sqm | |
| 33 | 32 | M&L Sand filling under paver block or in foundations including watering and consolidation complete all as specified and directed. | 40 | Cum | |
| 34 | 33 | M&L for factory made machine pressed pre polished coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. | 800 | Sqm | |
| 35 | 34 | M&L for factory made precast kerbs made of cement concrete 1:3:6 Type C-1 (20mm graded crushed stone aggregate) of any section indicated, with plain fair faces, including chamfers, weathering, throating etc setting and jointed in CM 1:3 complete all as specified and directed. | 80 | Cum | |
| 36 | 35 | Supply and fixing TMT bars 8 mm dia in binder cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed. | 1000 | Kg | |
| 37 | 36 | M&L for TMT bars 8mm dia and over upto 10mm dia and over in stirrups , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | 450 | Kg | |
| 38 | 37 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished complete all as specified and directed. | 50 | Sqm | |
| 39 | 38 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished complete all as specified and directed. | 90 | Sqm | |
| 40 | 39 | Use and waste of form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,for fair finished surfaces of concrete, flat, complete all as specified and directed. | 100 | RM | |
| 41 | 40 | M&L for RCC M-25 (20 mm graded crushed stone aggregate) design mix in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed. | 13 | Cum | |
| 42 | 41 | Materials and Labour for 40mm thick damp proof course in cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces with and including necessary formwork, complete all as specified and directed | 7 | Sqm | |
| 43 | 42 | M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including the cleaning the surfaces complete all as specified and directed. | 7 | Sqm | |
| 44 | 43 | M&L for reinforced cement concrete M-25 (20 mm graded crushed stone aggregate) design mix concrete as in foundations, including rafts footings, foundation beams, plinth beams and mass concrete complete all as specified and directed. | 18 | Cum | |
| 45 | 44 | M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in beams, cantilevers, bressummer, lintel/ lintel bands over 1.5m span etc complete all as specified and directed. | 5 | Cum | |
| 46 | 45 | Materials and Labour for reinforced cement concrete M-25 (20 mm graded crushed stone aggregate) design mix in columns; pillars; piers; posts; struts etc complete all as specified and directed. | 3 | Cum | |
| 47 | 46 | Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded crushed stone aggregates in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses,complete all as specified and directed. | 11 | Cum | |
| 48 | 47 | Use and waste of form work to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter for fair finished surfaces of concrete, flat, complete all as specified and directed. | 140 | Sqm | |
| 49 | 48 | Use and waste of form work for sides of concrete foundation footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter fair finished surface of concrete complete all as specified and directed. | 40 | Sqm | |
| 50 | 49 | Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintel beams/lintel band , cantilever and similar work fair finished surface of concrete complete all as specified and directed. | 25 | Sqm | |
| 51 | 50 | S&F TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. | 3800 | Kg | |
| 52 | 51 | M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling and finishing the surface even and fair complete all as specified and directed. | 70 | Sqm | |
| 53 | 52 | M&L for 1st class polished teak wood (Ghana) as in scantling, wrought, timber framed and fixed complete all as specified and directed. | 4.25 | Cum | |
| 54 | 53 | M&L supplying on site garden soil well sieved 90% to pass through IS sieve of 10mm size free from stones rubbish like lumps, stones, roots and other foreign material suitable for gardening. The soil should be fresh from quarry. The colour of the soil generally be red including cost of all materials labour transportation, all tools, plants, taxes, octroi etc all complete as specified directed and approved by PM (Stack/lorry measurements will be taken and 20% deduction shall be made towards voids) | 9000 | Cum | |
| 55 | 54 | M&L supplying on site manure well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colour of manure shall be black. The manure screened through sieve at designation 4.75 micron including carriage at site complete all as specified and directed. (Note:- The manure will be measured by measuring box) | 3000 | Cum | |
| 56 | 55 | M & L supplying on site recently produced Neem oil in form cake stacked and used within 15 days from procurement @ 1 Kg per sqm of soil to be mixed only for the top 300mm deep soil,to prevent white ant attack to the roots of the plants complete all as specified and directed. | 4000 | Kg | |
| 57 | 56 | Trenching in ordinary soil upto a depth of 60 cm including making up the trenched area to proper levels by filling Garden Soil mixed with sludge or/and manure in proportion 8:1 before and after flooding trench with water (excluding cost of Garden Soil, sludge or manure and removing/depositing of exc materials) complete all as specified and directed. | 3000 | Cum | |
| 58 | 57 | M & L for preparing the ground as per ser item no 56.00 & Grassing with approved \"selection 1\" grass including watering and maintenance of the lawn till the grass forms a thick lawn free from weeds and fit for mowing. Grass to be planted in rows 7.5cms apart in either direction. Inclusive of maintenance for the contract period, complete all as specified and directed. Note:- (Supply Garden Soil and manure will be paid under ser item no 53.00 and 54.00.) | 2000 | Sqm | |
| 59 | 58 | TREES | |||
| 60 | 58.01 | M & L for planting trees in 1m x 1m x1m deep pit, Filling the pit with fresh garden soil / silt, sand & manure in ratio of 2:1 by volume (2 parts of stacked volume of earth after reducing by 20%. 1 part of stacked volume of manure after reducing by 8%). Mixing soil / silt, sand & manure thoroughly well, leveling, as directed, watering previous night. Supplying and planting best quality tree ALSTONIA SCHOLARIS. The height of sapling should not be less than 2.5mtr and caliper not less than 30mm to be measured 15 cm above the junction of trunk and the root. The area between the trees shall be clean regularly\n\n Note: Excavation of pit, removal of soil, supply of Garden Soil and manure shall me measured and paid under respective item as mentioned above | 334 | Each | |
| 61 | 58.02 | All as per item No 58.01 above but for ANTHOCEPHALUS KADAMBA | 274 | Each | |
| 62 | 58.03 | All as per item No 58.01 above but for AZARDICHTA INDICA | 384 | Each | |
| 63 | 58.04 | All as per item No 58.01 above but for BAUHINIA BLAKEANA | 106 | Each | |
| 64 | 58.05 | All as per item No 58.01 above but for BAUHINIA PURPUREA | 88 | Each | |
| 65 | 58.06 | All as per item No 58.01 above but for CASSIA FISTULA | 90 | Each | |
| 66 | 58.07 | All as per item No 58.01 above but for CASSIA JAVANICA | 90 | Each | |
| 67 | 58.08 | All as per item No 58.01 above but for CASSIA SIAMEA | 258 | Each | |
| 68 | 58.09 | All as per item No 58.01 above but for DALBERGIA SISSOO | 62 | Each | |
| 69 | 58.1 | All as per item No 58.01 above but for DELONIX REGIA | 120 | Each | |
| 70 | 58.11 | All as per item No 58.01 above but for FICUS HISPIDA | 298 | Each | |
| 71 | 58.12 | All as per item No 58.01 above but for LAGERSTROEMIA SPECIOSA | 80 | Each | |
| 72 | 58.13 | All as per item No 58.01 above but for LAGERSTROEMIA PARVIFORIA | 24 | Each | |
| 73 | 58.14 | All as per item No 58.01 above but for MECHELIA CHAMPACA | 48 | Each | |
| 74 | 58.15 | All as per item No 58.01 above but for PLUMERIA ALBA | 154 | Each | |
| 75 | 58.16 | All as per item No 58.01 above but for PLUMERIA RUBRA | 96 | Each | |
| 76 | 58.17 | All as per item No 58.01 above but for POLYALTHIA LONGIFOLIA | 388 | Each | |
| 77 | 58.18 | Fruit tress All as per item No 58.01 above but for MAGNEFERA INDICA (DUSSERI) | 74 | Each | |
| 78 | 59 | PALMS | |||
| 79 | 59.01 | M & L PALMS Planting :- In 1m x 1m x1m deep pit, Filling the pit with fresh garden soil / silt, sand, & manure in ration of 2:1 by volume (2 parts of stacked volume of earth after reducing by 20%. 1 part of stacked volume of manure ager reducing by 8%). Mixing soil / silt, sand & manure thoroughly well, leveling, as directed, watering previous night. Supplying and planting best quality palms BISMARKHIA NOBILIS. The height of sapling should not be less than 1.5m and the spread should not be less than 1.2mtr, complete all as specified and directed.\n\n Note:1) Excavation of pit, removal of soil, supply of Garden Soil and manure shall me measured and paid under respective item as mentioned above | 12 | Each | |
| 80 | 59.02 | All as per item No 59.01 above but for CHRYSALIDOCARPUS LUTESCENS | 34 | Each | |
| 81 | 59.03 | All as per item No 59.01 above but for CYCUS REVOLUTA | 40 | Each | |
| 82 | 59.04 | All as per item No 59.01 above but for LIVINGSTONIA CHINENSIS | 60 | Each | |
| 83 | 60 | LARGE SHURBS | |||
| 84 | 60.01 | M & L Planting Shrubs / Hedges: in of pits size 0.3 x 0.3mtr to a depth of 0.3mtr and removing of earth including filling the pit with a mixture of manure and Garden Soil in the ratio of 1:2 (one manure : Two garden soil) and supplying and planting shrubs / hedges of good approved quality for BAMBUSA NANA (as specified) healthy grown up saplings with good roots system, plant shall be of minimum 0.45 mtr tall from ground level at the time of planting, watering, de-weeding, adding required fertilizers, replacing the died plants, including cost of all materials, labour, tools, plants, without any extra cost etc., all as specified, directed and approved by PM Note:1) Excavation of pit, removal of soil, supply of Garden Soil and manure shall me measured and paid under respective item as mentioned above | 3000 | Each | |
| 85 | 60.02 | All as per item No 60.01 above but for BAUHINIA ACUMLNATA | 600 | Each | |
| 86 | 60.03 | All as per item No 60.01 above but for BAUHINIA TOMENTOSA | 400 | Each | |
| 87 | 60.04 | All as per item No 60.01 above but for CAESALPINIA PULCHERRIMA | 200 | Each | |
| 88 | 60.05 | All as per item No 60.01 above but for FICUS NITIDA | 400 | Each | |
| 89 | 60.06 | All as per item No 60.01 above but for TABERNAEMONTANA CORONARIA | 3000 | Each | |
| 90 | 61 | MEDIUM SHRUBS | |||
| 91 | 61.01 | All as per item No 60.01 above but for CLERODENDRON INERME | 1500 | Each | |
| 92 | 61.02 | All as per item No 60.01 above but for GARDENIA JASMINOIDES | 200 | Each | |
| 93 | 61.03 | All as per item No 60.01 above but for LAGERSTROEMIA INDICA CANDIDA | 1700 | Each | |
| 94 | 62 | PALM SHRUBS | |||
| 95 | 62.01 | All as per item No 60.01 above but for RHAPHIS EXCELSA | 170 | Each | |
| 96 | 63 | GROUND COVER | |||
| 97 | 63.01 | Supplying and planting best quality healthy plants at site with fresh garden soil/silt & manure in ratio 1:3 (1 manure: 3 Garden Soil) including necessary transportation charges complete i.e. digging of earth, plantation of sapling adding manure regular maintenance, watering cleaning regularly the area between the plants, with all kind of veg/dry leaves and replacement of fresh sapling in place of dead saplings to maintain the ground cover of ALTERNANTHRA GREEN. The height of the sapling should not be less than 0.15m, spread not less than 0.15m, at the rate of 52 Nos per sqm, complete all as specified & directed. \n\nNote:1) Excavation of pit, removal of soil, supply of Garden Soil and manure shall me measured and paid under respective item as mentioned above | 2000 | Sqm | |
| 98 | 63.02 | All as per item No 63.01 above but for SYNGONIUM PODUPHYLLUM | 600 | Sqm | |
| 99 | 63.03 | All as per item No 63.01 above but for WEDELIA TRILOBATA | 1200 | Sqm | |
| 100 | 63.04 | All as per item No 63.01 above but for ZEBRINA PENDULA | 600 | Sqm | |
| 101 | 64 | LAWN | |||
| 102 | 64.01 | M & L for preparing the ground as per ser item no 56.00 & covering the prepared ground with Pusa Selection-1 carpet grass including removing stone uprooting vegetation, weeds and removing all foreign matters if any and grassing with Pusa Selcection-1 grass carpet, including watering and maintenance of the lawn for the contract period of phase I till the grass forms a thick lawn free from weeds and fit for mowing including necessary supply Garden Soil & manure as required in row 5 cm apart in either direction complete all as specified and directed. Note:- (Supply Garden Soil and manure will be paid under ser item nos 53.00 and 54.00.) | 9000 | Sqm | |
| 103 | 65 | Supplying and stacking of Insecticides, Pesticides and Weedicides at site of qty given below, including royalty and carriage. DURSBAN or equivalent 1 to 2lts chemical to be mixed with 200lts of water and sprayed on tree, shrubs, on Lawn etc. for the contract period of phase I as directed. | |||
| 104 | 65.01 | Pesticides | 260 | Per Ltr | |
| 105 | 65.02 | Insecticide | 260 | Per Ltr | |
| 106 | 65.03 | Weedicide | 260 | Per Ltr | |
| 107 | 66 | M&L providing and fixing of MS tree guard of 60cm dia and 1.80 mtr height above the ground level made of 3 Nos round bar 12mm dia vertical, 3 Nos 8mm dia longitudinal and hard drawn steel wire fabric mesh of aperture size 4x7.5cm of 2mm dia wire,1.22 mtr height after a gap of 30cm from G.L and MS bar shall be embedded with PCC 1:3:6 in pit size 20x20x30cm including necessary welding etc and applying two coats of synthetic enamel paint over one coat of primer on steel surfaces complete in all respect all as specified and directed. | 56 | Each | |
| 108 | 67 | E/M Works | |||
| 109 | 67.01 | M & L for Nozzles & Rings Medium Multiple centre jet nozzle size 50/150. Body : Stainless Steel Body with Brass Nozzle with chrome plaited water effect height 12ft center jet complete all as specified and directed. Make:- Aquarius or equivalent make as approved by the PM. | 4 | Each | |
| 110 | 68 | M & L for Stainless Steel Ring for Nozzle assembly provision Size-16G Thickness 75mm OD 4mtr. Round Body - Stainless steel 304 with steel welding work complete all as specified and directed. | 4 | Each | |
| 111 | 69 | M & L for Swing Joint for Medium waltzing Nozzle Size 25mm Body- Fully Stainless Steel 304 Nozzle complete all as specified and directed. Make : Aquarius or equivalent make as approved by the PM. | 48 | Each | |
| 112 | 70 | M & L for Medium waltzing Nozzle Size 25mm Body- Fully Stainless Steel 304 Nozzle Water Effect Height 8 ft complete all as specified and directed. Make : Aquarius or equivalent make as approved by the PM. | 48 | Each | |
| 113 | 71 | M & L for Water proof lights Programmable colour changing led based nozzle mounted Ring Type 27 watt 9 LED 27 watt Luminaries comprise of 12 Volt x 27 W waterproof fixed lights (of approved make Aquarius). Overall height of light body shall be 173mm outer Dia and inner dia 50mm and height 65mm. Luminaries shall have die cast fully Steel alloy bodies with heat fused epoxy / polyester all over coating. All fasteners shall be of stainless steel. Mounting breaket shall be stainless steel. Imported colored LED (Choice of colour from Red, Green & Blue) shall be mounted in between sandwich of three layer water proofing pieces of Poly glass of 150mm dia each sealed by a high quality elastomer Silicon gasket. LED Bulb shall be reflector Lens Fitted in Holder. To prevent ingress of water the waterproof luminaries shall have a Brass cable gland that compensates for variations in cable diameter both initially and ongoing due to factors such as temperature variation and ageing. Wiring shall be 4 core double insulated PVC flexible with variation and ageing. Waterproof luminaries shall be waterproof when fully immersed in water per rating IP68 and shall have been tested All \"in Pool\" connections shall be fully waterproof height 65mm this light are 100% shockproof modal : Aquarius / Stainless Steel / PC27W / 00117B with Lab Tested certificate UW-IP68 Body : Fully Stainless Steel 304, Make : Aquarius / Oase / Wet Design, Color :RGB, Life-95000hr. | 60 | Each | |
| 114 | 72 | Supply , installation , testing and commissioning for Digital Color Changing programmable controller for LED lights with power supply Make : Aquarius / Oase / Wet Design, Input : Volt : 180 to 280V AC, Output Volt - 12 DC, Type of Body : Steel sheet with paint powder cortain finish enclosure of with hanged front door Floor mounted with provision for incoming & outgoing cabling entry electrical panel protected against dust & jets of water per rating weather proof body IP 55, complete all as specified and directed. | 4 | Each | |
| 115 | 73 | Supply , installation , testing and commissioning for Open well Submersible pump 7.5HP Three phase pump with pump suction covered large area mash filter, filter body of GI with filter mash SS304, complete all as specified and directed. | 4 | Each | |
| 116 | 74 | Supply installation, testing and commissioning of LT Feeder Pillar Box, AC 415 V, 50 Hz, 3 Phase, 4 Wire, of size 1050 mm (H) X 750mm (W) X 375mm (D), suitable for accommodating the accessories, totally enclosed self-supporting structure/cubicle, fully compartmentalized type, weather proof, protection IP-65, suitable for outdoor use, sloping canopy at top, double hinged doors at front with suitable locking arrangement and bolted rear opening shutters and suitable locking arrangement; Provision of louvers at sides ; Bottom cable entry with double compression copper stainless steel gland for incoming and outgoing cable; Structure made out of 3.15 mm thick CRCA steel sheets with angle iron frame work and legs of ISA-40 X 40 X 6 mm, with legs (Height 450 mm minimum above platform level) grouted to PCC (1:2:4) Type B1,foundation platform of size 1000 mm (L) x 500 mm (W) x 300 mm (D) ; Structure treated under 8-Tank metal treatment process and duly powder coated ; with suitable mounting arrangement for all the accessories, pre wired with suitable size of copper conductor connection for all switchgear and meters, including jointing materials, aluminium lugs for UG cables with and including all the accessories as per Annexure-XV to Schedule-A Part-VIII, complete all as specified and directed. \n | 4 | Each | |
| 117 | 74.01 | (a) Set of incoming fuses L&T. (b) Incoming MCB L&T 63 amp. (c) Ammeter for current rating of pump make - AE (Automatic electric). (d) Voltmeter AE (Automatic electric). (e) Phase indicating lamps. Make L&T ESBEE. (f) Push button on / off switches for pump. Make L&T ESBEE. (g) Single phase preventer. Make Mini Lac. (h) MCB. Make : L&T. (i) Thermal overload relay. Make L&T. (j) Contractor L&T. (k) Volt Selector switch. Make : L&T Salzer. | |||
| 118 | 75 | M&L for Complete plumbing required in fountain for the fountain in GI + Steel pipe including welding + necessary Brass control valves, complete all as specified and directed. | 4 | Each Job | |
| 119 | 76 | M&L for concealed sub main wiring with two single core FRLS PVC insulated unsheathed cable 4.00 Sq.m ( Nominal area with stranded copper conductor cable,1100 Volts grade and continuous earth wire of two single core FRLS PVC insluated, unsheathed cable 2.5 Sq.mm (Nominal area ) with stranded copper conductor cable,1100 Volts grade, drawn in PVC conduit,complete all as specified and directed. | 220 | RM | |
| 120 | 77 | Supply and Fix, shock proof, rustproof, termite resistant, weather proof, fire retardant - Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94,high heat distortion temperature (200°C as per IS:10192), pole mounted Junction box, minimum size (Internally) 250 mm (H) x 200 mm (W) x 105 mm (D), all as per Cat No. “GS-JB-2520” of Make ‘Sintex’ or equivalent Model of Make ‘Hensel’ including provision of 01 (One) No. electrolytic aluminium bus bar, 10 Amps, supported on non-hygroscopic fibres and brass screws for mounting and with and including 01 (One) No. miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 Amps [Cat No BA10060C of Make “L&T” or equivalent Model of Make Legrand/Siemens] , complete all as specified and directed. | 4 | Each Job | |
| 121 | 78 | Supply, laying, connecting and testing of HDPE water tubes ,with all fitting and laid in trenches or surface and for following sizes complete all as specified and as directed | |||
| 122 | 78.01 | 25 mm bore | 3035.83 | RM | |
| 123 | 78.02 | 40 mm bore | 1451.63 | RM | |
| 124 | 78.03 | 63 mm bore | 725.82 | RM | |
| 125 | 78.04 | 100 mm bore | 550 | RM | |
| 126 | 79 | S&F of Lawn Sprinklers Automatic 360 Rotating Adjustable Garden Hose Watering Sprinkler with Leak Free 3 Arm prayer,Spike Base complete all as specified and directed. | 25 | Each | |
| 127 | 80 | M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit and all conduit accessories (concealed) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick Bakelite sheet ISI marked top cover with brass screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed for the following :- | |||
| 128 | 80.01 | One light point controlled by one switch. | 714 | Point | |
| 129 | 80.02 | One switch socket out let point 5 Amps on independent board. | 14 | Point | |
| 130 | 80.03 | One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size | 14 | Point | |
| 131 | 81 | S&F for Bollard Light for Garden with 9W LED Bulb (Two Years Warranty) Size: 22 x 22 x 60 Cm (L x B x H) || Material :- Metal Make including all connected accessories with 50 mm GI pipe 2.5 mtr long and all as specified and directed. Flourish Cat No. IV82_01 or Equivalent in Havels/ Whipro | 260 | Each | |
| 132 | 82 | S&F for Outdoor waterproof solid aluminium body foot light with 3W LED light included complete all as specified and directed. Make Sparklite or equivalent in Havels, Whipro | 448 | Each | |
| 133 | 83 | M&L for point wiring for one socket outlet 15 Amps on independent board complete with 4 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit and all conduit accessories (concealed) and including provision of 4 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick Bakelite sheet ISI marked top cover with brass screws and cup washers for housing switches, socket outlets etc, all as specified and as directed | 15 | Point | |
| 134 | 84 | M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm, 4 Core, complete all as specified and directed. | 1640 | RM | |
| 135 | 85 | Material & labour for construction of valve pit of size 900mm X 900mmx800mm all complete as specified (Valve Pit Type - A) | 9 | Each Job | |
| 136 | 86 | Material & labour for construction of valve pit of size 1200mm X 1200mmx1000mm all complete as specified (Valve Pit Type - B) | 5 | Each Job | |
| 137 | 87 | S&F of Wall Socket Outlet Watertight 16-20 Amp, 3P + E, IP 67 protrection complete all as specified and directed. Make Hansel Cat No. 119406 or equivalent | 15 | Each | |
| 138 | 88 | S&F of Distribution Boards IP 65 “Weather proof”, 9 modules, of size 200 x 238 x 111 complete all as specified and directed. Make Hansel, Cat No. KV PC 8109 or equivalent model of make as approved by the PM. | 4 | Each | |
| 139 | 89 | S&F Cable Junction Boxes IP 66/67 “weather proof”, for outdoor installation (with knockouts for cable entry - Black colour ) for 2.5 sq.mm complete all as specified and directed. Make Hansel, Cat No. KF 5025 or equivalent model of make as approved by the PM. | 265 | Each | |
| 140 | 90 | Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10kA, 6 Amps complete all as specified and directed. | 120 | Each | |
| 141 | 91 | Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead strip 32 mm x 6 mm by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009), complete all as specified and directed. | 8 | Each Set | |
| 142 | 92 | Materials and Labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified and directed. | 100 | RM | |
| 143 | 93 | Materials and Labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 mm x 4mm galvanised iron strip, complete all as specified and directed. | 60 | RM | |
| 144 | 94 | M & L brick work with sub class 'B' bricks(old size bricks) straight or curved on plan exc 6 m mean radius built in cm 1 : 4 with and including weep holes in brick work complete all as specified and directed . | 1250 | Each | |
| 145 | 95 | Supply, laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of cross sectional area 35 sq. mm, 3 ½ core, complete all as specified and directed. | 675 | RM | |
| 146 | 96 | Supply installation, testing and commissioning of LT Feeder Pillar Box, AC 415 V, 50 Hz, 3 Phase, 4 Wire, of size 1500 mm (H) X 1400 mm (W) X 375 mm (D), suitable for accommodating the accessories, totally enclosed self-supporting structure/cubicle, fully compartmentalized type, weather proof, protection IP-65, suitable for outdoor use, sloping canopy at top, double hinged doors at front with suitable locking arrangement and bolted rear opening shutters and suitable locking arrangement; Provision of louvers at sides ; Bottom cable entry with double compression copper stainless steel gland for incoming and outgoing cable; Structure made out of 3.15 mm thick CRCA steel sheets with angle iron frame work and legs of ISA-40 X 40 X 6 mm, with legs (Height 450 mm minimum above platform level) grouted to PCC (1:2:4) Type B1,foundation platform of size 1800 mm (L) x 500 mm (W) x 300 mm (D) ; Structure treated under 8-Tank metal treatment process and duly powder coated ; with suitable mounting arrangement for all the accessories, pre wired with suitable size of copper conductor connection for all switchgear and meters, including jointing materials, aluminium lugs for UG cables with and including all the accessories as per given below , complete all as specified and directed. | 4 | Each | |
| 147 | 96.01 | BUS BAR CHAMBER (i) 04 of electrolytic aluminium bus bar,200 Amp of suitable length and section not less than 25mmx8 mm, with short circuit withsatnd capcity of 50KA for 1 Sec, supported on non hygroscopic fibres and brass screws for mounting . The bus baaar shall be insulated by heat shrinkable sleeves and clip on shrouds joints.\nINCOMER \n\n(i) MCCBs /AC 415V, 4 pole with curent rating 125Amps and 25KA breaking capcity ICU at 415V ,AC 5oHz with adjustable over load setting 0.8-1.0 xin and adjustable short circuit setting 6-10xin all as per L&T \nINDICATING DEVICES \n(i) Digital Voltmeter, Ammeter, 3 phase, Accuracy class 1.0 input voltage range 17-520 VAC(P-P), auxillary supply 90-300VAC , flush mounted, size 96x96 mm.\n(ii) Indicator lamp LED, type with holder (R,Y,B) with selector switch 3 phase .accuracy class1of make L&T \nOUT GOING FEEDER \n(i) MCCBs , 415 Volt 3 pole with current rating 80 Amps and 25 KA breaking capacity ICU at 415 V AC 50 Hz with adjustable over load setting 0.8-1.0xin and adjustable short circuit setting 6-10xin all as per of make L&T\n(ii) MVBs double pole AC 24o V with current rating 63Amp and 10KA breaking capcity all as per of Make L&T \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n | |||
| 148 | 97 | Drilling trial Bore of suitable diameter with reverse rotary circulation or direct circulation method or combination of both by using power rig for housing B345:D348of 250 mm nominal bore reduced to 150 mm below ground level in any kind of soil strata including hard stone/ boulder etc. complete all as specified and directed. NOTE:- The anticipated depth of boring of the tube well at site is 110 metres below ground level. However, the depth of boring may be varied maximum of 30 Metres (Plus or Minus) as ordered by PM in writing. | 110 | RM | |
| 149 | 98 | Development of trial bore by reaming in steps viz From 250 mm to 350 mm ; From 350 mm to 450 mm ; From 450 mm to 525 mm; From 525 mm to 675 mm, up to 60 RM from ground level for insertion of casing pipe 350 mm bore, complete all as specified and directed. | 60 | RM | |
| 150 | 99 | Development of trial bore by reaming in steps viz From 250 mm to 350 mm ; From 350 mm to 450 mm ; From 450 mm to 525 mm, exceeding 60 RM but not exceeding 110 RM from ground level for insertion of casing pipe/stainer, 250 mm bore, complete all as specified and directed.\nNOTES: - \n(a) Depending upon the availability of water bearing strata, if drilling beyond 110.00 Metre is required, the same shall be carried out only after obtaining written approval from PM.\n(b) The rate for reaming beyond 110.00 Metre depth will be considered as per quoted rate at Serial item No. 339 here in before. | 50 | RM | |
| 151 | 100 | Material and labour for Bail Plug having 3.00 Metre length, fabricated out of ERW heavy duty MS casing pipe of 7.10 mm wall thickness and suitable for 250 mm bore, including welding joints with MS coupler ring around the pipes with MS flat iron 80 mm X 6 mm, complete all as specified and directed. | 1 | Each | |
| 152 | 101 | Supply, lowering and fixing in position 250 mm nominal bore ERW heavy duty MS casing pipe of 7.10 mm wall thickness and welding joints with MS coupler ring around the pipes with MS flat iron 80 mm X 6 mm complete all as specified and directed. | 47 | RM | |
| 153 | 102 | Supply, lowering and fixing in position 350 mm nominal bore ERW heavy duty MS casing pipe of 8.00 mm wall thickness and welding joints with MS coupler ring around the pipes with MS flat iron 80 mm X 6 mm complete all as specified and directed.\n \n | 40 | RM | |
| 154 | 103 | Supply, lowering and fixing in position 250 mm bore, 8.00 mm wall thickness, low carbon galvanized steel (LCG) strainer, 'V' wired type (inwardly widening to give no clogging property and shall have minimum geometrical resistance to water flow to reduce frictional head losses) , with 1 mm continuous slot to offer not less than 25 % open area, and with bevelled end, conforming to IS 8110:2000 (Reaffirmed 2006), butt jointed by welding in suitable length with MS flat iron 80 X 6 mm coupler ring all around the pipe complete all as specified and directed. | 20 | RM | |
| 155 | 104 | Supply lowering and fixing in position MS reducing socket 350 mm X 250 mm nominal bore, 8 mm thick and duly welded to pipe with MS flat iron 80 mm X 6 mm coupler ring complete all as specified and directed. | 1 | Each | |
| 156 | 105 | Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and directed. | 10 | Hours | |
| 157 | 106 | Supplying, pouring and packing pea-gravel of size 3 mm to 8 mm and packed all around the entire bore well to fill in the annular space between pipe assembly and bore hole, complete all as specified and as directed. | 10 | Cum | |
| 158 | 107 | Providing water logging test with electro logging equipment and required machinery for ascertaining/ logging aquifers encountered in trial bore and arranging and defining the water availability test giving test report of Geo-Hydrologist from Govt. approved laboratory recommending water bearing zones, TDS of water etc., complete all as specified and directed. | 1 | Each Job | |
| 159 | 108 | Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield complete all as specified and directed. | 1 | Each Job | |
| 160 | 109 | Supply, fixing and lowering 150 mm bore MS, column pipe, both end flanged, 3.00 Metre long, fitted with flanges at both ends made out of heavy grade pipes of 5.4 mm wall thickness, ISI Marked (IS: 1239-Part-I), complete with bolts, nuts, gaskets etc. as required complete all as specified and directed. | 70 | RM | |
| 161 | 110 | Supply and Fix, Mild Steel Chains with link sections, 3.20 mm dia., size 16 mm X 12 mm, having breaking load 400 Kgs., weighing 0.20 Kg/RM (Minimum), conforming to 2429 (Part 1) :1987, for securing submersible pump set complete all as specified and directed. | 97 | RM | |
| 162 | 111 | Supply and fixing well cap made out of 5 mm thick MS plate with provision of suitable holes for passing through two runs of flat three core, PVC insulated industrial cable for submersible motor, 6.00 Sq. mm and suitable for fixing to 350 mm nominal bore ERW heavy duty MS casing pipe of 8.00 mm wall thickness complete all as specified and directed. | 1 | Each | |
| 163 | 112 | Materials and Labour for mild steel works conforming to Grade E 165 (Fe-290) in, bands, straps, supports or stays for holding column pipe and submersible pump set, including necessary bolts, nuts and washers as required including cutting ends to shape as directed, drilling holes etc., complete all as specified and directed. | 30 | Kg | |
| 164 | 113 | Material and labour for 100 mm bore galvanized steel tubing, medium grade, 3.00 Metre long, in twin arrangements, as in gravel filling arrangement to bore well, fixed 2.00 Metre below ground level and 1.00 metre above ground level, inclined at an angle of 40 Degree form horizontal plane of ground, complete all as specified and directed.\nNote: - Earthwork and PCC Foundation Block for the pipes will measured and paid separately under respective items in this BOQ. | 1 | Each Job | |
| 165 | 114 | Supply, installation, testing and commissioning of hand operated chain pulley block , working load limit and safe working load 1.0 MT, range of lifting 50 Metres, velocity ratio 72(m/m) approx, grade of load chain T (8) , Class 1, ISI Marked (IS 3832:2005), complete all as specified and directed. [Mfg. Crushmor Maxban India 'Maxpull'/ Kepro Tools & Equipments Pvt. Ltd. 'Kepro' / BEM Co Pvt. Ltd] | 1 | Each | |
| 166 | 115 | Supply, installation, testing and commissioning of submersible pump set , electric driven 415 V, 50 Hz, Three Phase, 20 HP, 15 KW, speed 2900 RPM (Sync) , delivery size suitable for 150mm size NRV, having discharge capacity 670 Litres per minute at 75 Metre head, suitable for lowering inside existing casing pipe of bore well (300/350mm) including necessary jointing to existing GI column pipes with flanged joints, with rubber gaskets, nut, bolts & washers of required size, and including electrical connection from starter panel to motor with existing submersible cable, complete all as specified and directed. (Make:- Model No. UPHA 293/4+HBC 203' of make KSB or equivalent model of make ''Crompton Greaves/Calama ) NOTE:- Column pipe with flanged joints and submersible cable will be measured and paid seperately. | 1 | Each | |
| 167 | 116 | Supply and fixing of flat three core, PVC insulated industrial cable for submersible motor, 10.00 Sq. mm (Nominal area) with multi stranded copper conductor, 1100 Volts grade, conforming to IS: 694 all as per product Code No WHPNDSKB3010 of Make ‘Havells’ or equivalent of make Finolex /RR Cable, connected from starter to submersible pump motor, complete all as specified and directed. | 110 | RM | |
| 168 | 117 | Supply and Fix, Fully Automatic Star Delta Starter with Single Phase Preventer, in sheet steel enclosure, suitable for 20 HP submersible pump 3Ø, 415V, 50Hz, relay range 20 - 32 A , coil voltage 360V, all as per Cat No. 'SS95975COEO' of Make 'L&T or equivalent Model of Make BCH/Seimens/ABB, complete all as specified and directed. | 1 | Each | |
| 169 | 118 | BOREWELL JUNCTION BOX\nSupply installation, testing and commissioning of LT Junction Box, AC 415 V, 50 Hz, 3 Phase, 4 Wire, of size 750 mm (H) X 750 mm (W) X 600 mm (D), totally enclosed self-supporting structure/cubicle, fully compartmentalized type, weather proof, protection IP-65, suitable for outdoor use, sloping canopy at top, double hinged doors at front with suitable locking arrangement and bolted rear opening shutters and suitable locking arrangement; Provision of louvers at sides ; Bottom cable entry with double compression copper stainless steel gland for incoming and outgoing cable; Structure made out of 3.15 mm thick CRCA steel sheets with angle iron frame work and legs of ISA-40 X 40 X 6 mm, with legs (Height 450 mm minimum above platform level) grouted to PCC (1:2:4) Type B1,foundation platform of size 1200 mm (L) x 1000 mm (W) x 300 mm (D) ; Structure treated under 8-Tank metal treatment process and duly powder coated ; with 03 (Three) Nos. electrolytic aluminium bus bar, 200 Amps of suitable length and section not less than 25 mm x 8 mm,with short circuit withstand capacity of 50KA for 1 sec ,insulated by heat shrinkable sleeves and clip on shrouds for joints, supported on non-hygroscopic fibres and brass screws for mounting including necessary jointing materials, aluminium lugs for connection of cables, complete all as specified and directed. \n | 1 | Each | |
| 170 | 119 | Supply and fixing of rotational moulded polyethlene water storage tank (triple layer) capacity 500 ltr ( Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. | 5 | Each | |
| 171 | 120 | Supply and fixing of rotational moulded polyethlene water storage tank (triple layer) capcity 1000 ltr ( Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. | 5 | Each | |
| 172 | 121 | Supply and fix cast iron double flanged, sluice valve, size 100 mm bore, Class PN 1.6, long body type, with brass spindle, CI wheel, ISI Marked [IS 14846-2000(Reaffirmed 2010)], including provision of carbon steel nuts, bolts & washers, rubber gaskets etc., fixed to water mains, complete all as specified and directed. | 1 | Each | |
| 173 | 122 | Supply and Fix, cast iron double flanged swing check type Reflux (Non-Return) Valve for water works purposes, of size 100 mm bore, Class PN 1.0, with vertical seating and integral by-pass arrangement, both ends flanged with holes, ISI Marked (IS-5312: 2004), including provision of carbon steel nuts, bolts & washers, rubber gaskets etc., fixed to CI water mains, complete all as specified and directed. | 1 | Each | |
| 174 | 123 | Supply and fixing of PP-R Gate valve ( Brass insert) as per requirement of the following sizes:- | |||
| 175 | 123.01 | 25 mm bore | 30 | Each | |
| 176 | 123.02 | 40 MM bore | 15 | Each | |
| 177 | 123.03 | 63 mm bore | 10 | Each | |
| 178 | 124 | Supply and fixing of ball valve of high pressure of PTMT with epxoy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed ( Minimum wt of 25mm-455 gms ) complete all as specified and directed. | 10 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
