Tender For Design, Development, Construction Of Surface Parking For Two Wheeler And Four Wheeler Consisting Of Civil Works And Electrical Works On Mahatab Road At Rourkela
Tender Value
85.83 Lakhs
Estimated cost
Bid Submission
22 Oct 2019
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
11200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rourkela → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Design, Development, Construction Of Surface Parking For Two Wheeler And Four Wheeler Consisting Of Civil Works And Electrical Works On Mahatab Road At Rourkela
BOQ
| Name of Work:Design, Development, Construction of Surface Parking for Two Wheeler and Four Wheeler consisting of Civil works and Electrical works on Mahatab Road at Rourkela | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation, trenches or open cut including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. | BI01010001010000000000000515BI0100001113 | 2899.85 | Cum |
| 2 | 2 | Disposal of excavated earth within a lead of 5 km | BI01010001010000000000000515BI0100001114 | 2899.85 | Cum |
| 3 | 3 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after required excavation, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. compacting to meet requirement of table 300-1, 300-2 and as per relevant clauses of section-300 | BI01010001010000000000000515BI0100001115 | 6320 | Sqm |
| 4 | 4 | Supply and filling sand including watering and compaction | 2148.8 | Cum | |
| 5 | 5 | Providing and laying factory made Cement Concrete paver blocks of 60 mm thick and M-30 grade of concrete of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc., including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge & manufacturer’s specifications | 5388 | Sqm | |
| 6 | 6 | Providing and laying P.C.C(1:3:6) in foundation trench and below flooring using 40mm graded crusher broken HG metal, including compaction, curing including cost of all materials and labours etc complete as per direction of Engineer-in-large | 46.97 | Cum | |
| 7 | 7 | Providing lifting, hoisting and laying reinforced cement concrete of grade M20 to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 12mm size black hard crusher broken chips of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required, by grouting/plaster with cement mortar (1:4) wherever necessary without any extra cost) scaffolding, including, watering and curing the required period, including cost of all materials, labour, conveyance, loading and unloading, royalties, sundries, tools and plants, etc., complete as per direction of the Engineer-in-charge, but excluding cost of materials and labour for reinforcement and shuttering. | 99.23 | Cum | |
| 8 | 8 | Providing strong, rigid, levelled, and plumbed centering and shuttering to required shape and size , for floors with wooden or steel centering materials with all necessary bracing and tiles and supports with levelling centering covered with bituminous paper with provisions necessary holes and pockets for electrical conduits, pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. | |||
| 9 | 8.1 | Footing, kerb wall, thrust wall, pedestal etc. in foundation and plinth | 937.33 | Sqm | |
| 10 | 8.2 | Beam | 36.96 | Sqm | |
| 11 | 8.3 | Column | 43.2 | Sqm | |
| 12 | 8.4 | Roof slab, chhana | 44.28 | Sqm | |
| 13 | 9 | Supplying TMT steel reinforcement bars of grade FE 500of required diameters of approved quality including straightening, cutting to size, bending, and binding the reinforcement, lifting and placing in position as per design complete including cost of bars , binding wires 18 gauge, including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights) | 994.39 | Kg | |
| 14 | 10 | Providing, welding, bolting structural steel such as base plate, angle, channels, erecting, hoisting, fixing in position as per direction of engineer including required nuts & bolts | BI01010001010000000000000515BI0100001116 | 5 | Qtl |
| 15 | 11 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth with all lead and lift including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc., required for the work complete in all respect as directed by the Engineer-in-Charge. | 4.75 | Cum | |
| 16 | 12 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size with dimensional tolerance ± 8 percent in cement mortar (1:6) in super structure with all lead and lift including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc., required for the work complete in all respect as directed by the Engineer-in-Charge. | 16.59 | Cum | |
| 17 | 13 | Providing and applying 16 mm thick plaster to rough side of wall in cement mortar (1:6) on all types of surfaces using coarse clean sand including surface preparation, curing both the coats, roughening the first coat for making key for the next coat ,bends, pattas, grooves, drip moulds, etc. and all scaffolding, curing etc., including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. | 95.4 | Sqm | |
| 18 | 14 | Providing and applying 12 mm thick plaster to plumb finished side in cement mortar (1:6) on all types of surfaces using coarse clean sand including surface preparation, curing both the coats, roughening the first coat for making key for the next coat ,bends, pattas, grooves, drip moulds, etc. and all scaffolding, curing etc., including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc.complete in all respect as directed by Engineer-in-Charge. | 72 | Sqm | |
| 19 | 15 | Paint internal: Wall painting two coats with plastic emulsion paint | 72 | Sqm | |
| 20 | 16 | Paint external: Wall painting Two coats with weather coat paint of approved shade on new work | 885.4 | Sqm | |
| 21 | 17 | Providing and fixing Kota stone tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles. | 18 | Sqm | |
| 22 | 18 | Supplying, fitting and fixing of approved quality of fabricated iron doors & windows with angle iron door frame of size (40x40x5)mm, MS flat of size (25x5)mm and 1mm thick M.S. sheet including priming etc complete as per the specification and direction of the engineer in charge. | 181.52 | Kg | |
| 23 | 19 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes all complete as per clause 803 of specifications. | 600 | Sqm | |
| 24 | 20 | Supply of 50 x 50 x 6mm MS angle post of 2.6m height including cutting, drilling, welding etc complete | 11.42 | Qtl | |
| 25 | 21 | Supply of PVC quoted GI chain link fencing of wire thickness 3mm and fencing opening of 2\". | 357 | Sqm | |
| 26 | 22 | Fixing of welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:3:6 (1 cement:3 fine sand : 6 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be trutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately): | 357 | Sqm | |
| 27 | 23 | Supplying, fitting and fixing of approved brand of size 4'x 4'x 8' with roofing, walling, flooring with FRP sheet and fixing with all accessories wash basin,tap,hanger,electrical point, flush tank, alpha set. With cost of all materials required for the work with all labour etc complete as per the direction of the E.I.C. as per following details:\n1. FRP toilet both side finishing & weather proof.\n2. Structure will be 1\"x 1\" sq. MS pipe center Block & inner-outer FRP molded sheet\n3. Structure vertical and beside pipe 2” x2” FRP Block system\n4. Cooling system center puff sheets block\n5. Platform work 2”x 2” sq. MS pipe, with FRP sheets 5mm checkers style\n6. FRP panel sheet thickness – inner 2mm & outer 3mm \n7. Provision for ventilation \n8. European style toilet with necessary plumbing and electrical fittings | 4 | Nos | |
| 28 | 24 | Supplying and installation of 8'x 4.5'x 22\" FRV biodigester of DRDO technology of capacity 1800 ltrs, 6mm wall thickness with cost of all materials required for the work with all labour etc complete as per the direction of the E.I.C. \nRatio of Bio-media & Bio- Inoculums Culture & Ecoziya - 30%:70% | 2 | Nos | |
| 29 | 25 | Dismantling of existing structures like walls, masonry, cement concrete, Pavement whatever necessary, storing and disposal of dismantling unsuitable material with all leads and lifts up to 5km and stacking the usable materials including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc. complete in all respect as directed by Engineer-in-Charge.\nBrick Works | 9.43 | Cum | |
| 30 | 26 | Supplying all materials, labour and T&P for installation of O.H.service tank(PVC) on the existing roof of the building as per drawing, specification and direction of Engineer-in-charge etc all complete. Double layer Rotational Moulded Cylindrical Vertical water storage tanks (ISI marked) | 1500 | Ltr | |
| 31 | 27 | Supplying all materials, labour and T&P and laying in trenches, unplasticized PVC pipes conforming to ASTM-D-1785/89 including required fittings such as adopter (male/female), tee, bend elbow tapper etc. as required including testing as per specification all complete for following nominal diameter as per direction of engineer in charge. | |||
| 32 | 27.1 | 20mm dia | 180 | Rm | |
| 33 | 27.2 | 25mm dia | 20 | Rm | |
| 34 | 27.3 | 32mm dia | 10 | Rm | |
| 35 | 28 | Supply, delivery and fixing of brand new suitable size of brass/gun metal Non Return valve as per relevant IS specification including all required fittings.\n20mm dia | 1 | Nos | |
| 36 | 29 | Supply, delivery and fixing of brand new suitable size of brass/gun metal gate valve as per relevant IS specification including all required fittings.\n20mm dia | 4 | Nos | |
| 37 | 30 | Supplying of ISI marked pump, capacity 80 lit/m, 15 m head, centrifugal pump for lifting water from Underground tank to Overhead tank, to be fitted in caretakers room, with starters, protection, suction arrangements etc. complete. | 2 | HP | |
| 38 | 31 | Service Connection from PHED:\nSupplying, fixing of ferrule bore including drilling the water main (cast iron pipes or pipes with the metal straps) as per specification complete.\nSupplying, fixing of 20mm dia.Brass or Gun metal Full way valve with wheel as per specification complete\nProviding & laying in trenches, 20mm dia.UPVC pipe grade conforming ASTM-D-1785/89 & pipe fittings including testing as per specification complete including earth work | 1 | Nos | |
| 39 | 32 | Supply and plantation of Tree of 10'height complete.\nTerminalia Catappa. | 30 | Nos | |
| 40 | 33 | Supplying all materials, labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. 90mm dia, class 3 | 4.5 | Rm | |
| 41 | 34 | Supply of 16M high mast shaft suitable for 55 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory. | 3 | Nos | |
| 42 | 35 | Supply of raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation). | 3 | Nos | |
| 43 | 36 | Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. | 3 | Lot | |
| 44 | 37 | Supply of minimum 16500 lumen output LED floodlight similar to BJFL 150W LED or equivalent. | 12 | Nos | |
| 45 | 38 | Supply of LED type single dome aviation obstruction light. | 3 | Nos | |
| 46 | 39 | Supply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. | 3 | Nos | |
| 47 | 40 | Supplying, Installation, testing and commissioning of OUTDOOR TYPE, compartmentalized, double door Feeder Pillars fabricated out of suitable size angle iron and flats and covered with 2mm thick cold rolled CRCA sheet, weather proof powder coated painting etc., complete with Al. Bus Bar, inter-connection with solid/stranded copper conductor wire/copper strips, glands neutral links, name plate and pad locking facility etc. including the following switchgears etc., complete as required with detailed specification comprising of the following:\na)1Nos - 63A TPN MCCB (Incomer)\nb)1Nos - 63A 4P RCCB (Incomer)\nc)6Nos - 32A TPN MCB (Outgoings)\nd)1Nos - MFM (Incoming)\ne)1Nos - Digital Voltmeter (Incoming)\nf)6Nos - Digital Ammeter (Outgoing)\nOn, Off indication lamps for incoming. | 1 | Nos | |
| 48 | 41 | Supply of 3.5Cx35 sqmm 1.1KV Al. XLPE insulated ISI marked and approved make. Aluminium conductor armoured cables suitable for working voltage upto 1100 volts as per specifications and approved make | 320 | RM | |
| 49 | 42 | Supply and Erection of Termination kits comprising of double brass compression gland and aluminium lugs. for 1100 V grade XLPE insulated PVC sheathed aluminium wire wound armouring for multicore 'Aluminium conductor' power cable of the 3.5Cx35sqmm as per enclosed detailed specifications and relevant IS . | 8 | Nos | |
| 50 | 43 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade exceeding 25 mmsq but not exceeding 120 mmsq direct in ground including excavation, sand, cushioning, protective covering and refilling the trench etc. as required | 320 | RM | |
| 51 | 44 | Earthing with G.I. earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required | 8 | Nos | |
| 52 | 45 | Supplying and laying 25 mm x 6 mm G.I. earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required | 160 | RM | |
| 53 | 46 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) \nGroup B | 4 | Point | |
| 54 | 47 | Supply and fixing of Electronics step type Modular fan regulator. (Make-Cona/ Anchor/ Usha/Bajaj) | 2 | Each | |
| 55 | 48 | Supplying and fixing of following sizes of Metal boxes in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.\n200mm x 250mm x 100mm deep | 2 | Set | |
| 56 | 49 | Supply and fixing of Modular switch ,Socket , T.V Socket and Telephone socket etc. (Make-Anchor/Cona/Havess, Great White) | |||
| 57 | 49.1 | 6Amp switch (Modular type ) | 8 | Each | |
| 58 | 49.2 | 6Amp socket( Modular type) | 4 | Each | |
| 59 | 50 | Installation, Testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor including providing and fixing phenolic laminated sheet cover on the fan box etc. as required | 2 | Each | |
| 60 | 51 | S/F of Mounting rail type fixture suitable for LED tube, 18W complete in all respects as required. | 2 | Each | |
| 61 | 52 | Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour. | 3 | Lot | |
| 62 | 53 | Installation of the mast feeder pillar by grouting the stand in concrete. | 4 | Nos |
AI Tender Summary
Tender Timeline
Oct 07, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender