83/2019-20 Deposit Work Of Venganoor Grama Panchayat-Drinking Water Project For Venganoor Grama Panchayat- Vavvamoola To Venniyoor Pump House - Balance Works - Supplying Laying 110Mm Pvc Pumping Main , Supply And Erection Of Pump Set And Allied Works
Tender Value
3.37 Lakhs
Estimated cost
Bid Submission
14 Oct 2019
0 days left
EMD
8500
Bank guarantee accepted
Document Fee
760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Neyyattinkara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
83/2019-20 Deposit Work Of Venganoor Grama Panchayat-Drinking Water Project For Venganoor Grama Panchayat- Vavvamoola To Venniyoor Pump House - Balance Works - Supplying Laying 110Mm Pvc Pumping Main , Supply And Erection Of Pump Set And Allied Works
BOQ
| Name of Work: Deposit work of Venganoor Grama Panchayat-Drinking water project for Venganoor Grama Panchayat- Vavvamoola to Venniyoor pump house - Balance works -Supplying laying 110mm pvc pumping main,Supply and erection of pump set and allied works. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach\ndeposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :\nAll kinds of soil\n | BI01010001010000000000000515BI0100001113 | 62.5 | M3 |
| 2 | 2 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. | BI01010001010000000000000515BI0100001114 | 125 | M |
| 3 | 3 | Supplying, conveying & laying UPVC pipes of 110mm 10kg/cm2 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent\ncement and testing the pipe line with water to the required test pressure | BI01010001010000000000000515BI0100001115 | 125 | M |
| 4 | 4 | Bailing out water with 5 HP engine and pumpset including conveyance to the site, errection, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc. complete. | BI01010001010000000000000515BI0100001116 | 350 | Kwh |
| 5 | 5 | Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 10.5m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pumset of suitable capacity, lifting the excavated\nsilt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools\nand plant and as per the directions of the department officers etc. complete. | BI01010001010000000000000515BI0100001117 | 18.84 | M3 |
| 6 | 6 | Charges for Dismantling the cables from the starter,Dismantling the NRV,CI sluice valve,delivery line lifting the pump set from the well with pully block and tripod leg etc.complete | BI01010001010000000000000515BI0100001118 | 2 | No |
| 7 | 7 | Removing the silt, mud and slushy soil from the gallery and disposing the same from the gallery with in a distance of 100 m without causing any damage to the existing structure and installations including hire and conveyance charges of tools etc complete as per the direction of the department officers etc. | BI01010001010000000000000515BI0100001119 | 45 | M2 |
| 8 | 8 | Cleaning light jungle including uprooting of rank vegetation, grass, bush wood, trees and saplings of girth up 30cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001120 | 150 | M2 |
| 9 | 9 | Man mazdoor engaged for Cleaning the pump house inside and premises | BI01010001010000000000000515BI0100001121 | 1 | LS |
| 10 | 10 | Supply and erection of CF pump set with the following specifications Supply erection testing and commissioning of KWA pre qualified reputed make horizontal split case centrifugal pump set with double\nentry bronze impeller, stainless steel shaft , CI casing with suitable type base plate with joi coupling with\nguard foundation bolts & nuts complete suitable coupling the pump and motor above the basement Etc\ncomplete supported by anti friction bearing including providing suitable concrete foundation Including cost\nof cement , sand and metal etc etc complete Duty condition is as follows -Discharge 450lpm ,Speed –\n1440 RPM, Total head – 28m ,Impeller - Bronze LTB 2 Double entry Pump Shaft – 304 Stainless steel ,(\nPositive Suction),Foot valvefrictionless CI make Supplying, erection testing and commissioning of KWA pre qualified reputed make horizontal solid shaft foot mounted TEFc / SPDP squirrel cage induction motor suitable for dire ct coupling with the above pump h RPM1440 or nearest capable to operate on voltage of 440 Volt (+/ - 10 % ) 50 HZ,(+ /- 3% ) AC 3 phase, 50 degree Amp. temp.rise ,Class F insulation, IP 22/23 degree of protection , with all standard specifications conforming to relevant IS325 and IE rules Efficiency : more than 70 % (.Motor shall be energy efficient and supporting certificates to prove EF1 or EF2 Supply, erection, testing and commissioning of fully automatic suitable star delta starter with MNX contactor , combined with powder coated 2 mm thick steel sheath dust and vermin proof floor mounted control cubical panel associated with in/out cable entry boxes for accommodating the following parameters for controlling functions of the the fully automatic star delta starter. suitable for above motor - L&T or equilent reputed co. make MNX 100 contactor unit - L&T or equilent Co make MNX 100 contactor unit- Timer and supervisory trip relay , OV/UV control relays Minilac or equilent Co make single phasing preventer AVF digital meter 1 No and selector switch - ON/Off ,trip & 3 phase indication lamps, Digital or numerical motor protection relay Power Circuit wiring with 20 x 3 mm PVC sleeve insulated copper bar and 2.5 sq.mm control wiring - following parameters should be provided in the panel 1 suitable fully automatic reputed make star delta starter 2, 100 amps MCCB with rotating handle and spreader 1 set 3 25 amps MNX air break contactor - 1 No 4, 40 amps MNX air break contactor - 2 Nos 5 Digital motor protection relay suitable with suitable type wire wound Ct for 3 phases 1 set 6 AVF meter , Ammeter , 1 each 7, LED panel lamps , ON , OFF trip lamps and push button switches Supply erection suitable type cubical floor mounted MS fabricated with dust and vermin proof cubical type panel board 16\nswg sheathed and powder coated consisting of suitable size 1 No.100A MCCB or equivalent for incomer and 2 Nos 100 A MCCB or equivalent outgoing MCCB are interlocking with each other providing copper / Aluminum bus bars inter connect the above MCCBs and fitted with 3 Nos RYB LED pilot lamps Analog\ntype 100 mm size Voltmeter Provided common earth bench for earthling the entire panel as per IE rules The panel fitted common base frame on suitable foundation Necessary bus bar arrangement with internal cabling for operating pump set Supply and laying of size 3.5 C x 25 sq.mm PVC XLPE 1.1 Gr insulated\narmored Aluminum conductor cable length 10 m for each set conforming to relevant IS for giving power connection starter to motor, starter capacitor etc. complete as per standards including end termination materials as per IE rules ( extra length if req uired excluded ) Supply of all materials laying , 20x3 mm copper conductor with required materials for earthling the motor ,starter, capacitor etc as per IE rules\nProviding plate earthling using 1200mm x1200mm x 12 mm size CI earth plate buried against at a depth of 3.00m from ground level with alternate layers at charcoal and salt including supplying fixing at 38mm\ndia perforated GI pipe funnel for water purpose etc. including the construction of masonry trough with\nman hole cover per IE rules. Supply and fitting of reputed make ISI marked capacitor conforming to IS\n2834 (relevant IS) suitable for above motor for working with unity power factor Supply and fitting of\nsuitable size bet quality ISI marked heavy duty cast iron double flanged sluice valve PN 1.6 suitable for\nabove pump set Supply of suitable size best quality, ISI marked heavy duty cast iron double flanged\nreflex Non Return Valve as per PN 1.6 suitable for above pump set Supply reputed make 100 mm dia\nFluid filled pressure gauge with Regulator cock and all accessories suitable for the above pump set\nSupply and fitting of suitable size best quality MS pipe, thickness not less than 8 mm and total length of\n10 Mts suitable for above pump set Fitting suitable size of foot valve with the suction pipe , Fitting valves\nwith suitable flanges nut and bolts IR sheet making suitable size delevery pipe with suitable specials in\nbetween valves and header line for connecting the pump set with pumping main Erection of the motor\npump set, starter panel boards, capacitors etc. on suitable concrete foundation giving power connecting\ncables to panel board to starters, starter to motor, capacitors, providing end termination, earthling of\nequipment including supply , fabrication and fitting necessary pipes and specials to connect the delivery\nof pump set to the header pipe etc. complete taking trial run to the satisfaction of departmental officers\nincluding any other works and cost of materials required for the commissioning of the motor pump set as\nper standards. Required length of cable ( out of 24 metre from supply ) for connection works shall be\nsupplied by department ). | BI01010001010000000000000515BI0100001122 | 5 | Hp |
| 11 | 11 | Charges of renewal work of existing panel board in pump house.\n | BI01010001010000000000000515BI0100001123 | 1 | No |
AI Tender Summary
Tender Timeline
Oct 05, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender