| 1 | 1 | Jungle clearing including uprooting of rank vegetation, grass, bush, wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 100 m outside the periphery of the area cleared as per specifications and directions of MIC. | | 1250 | Square meter |
|---|
| 2 | 2 | Earth work in excavation over areas in all kinds of soils including soft rock but excluding hard rock by mechanical means (Hydraulic excavator)/ manual means for roads, pavements etc., to required size and slope, leveling to line and grade, channelizing the water including dewatering if necessary, to keep the surface dry, stacking the useful material for reuse and disposal of unserviceable material to a lead upto 100 m and lift upto 1.5 m all complete as per specifications and directions of MIC. | | 250 | Cubic meter |
|---|
| 3 | 3 | Earth work in excavation in all kinds of soil including soft rock but excluding hard rock by mechanical means (Hydraulic excavator)/ manual means in foundation, trenches, retaining wall, drains, manholes, chambers, culverts etc. including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil within a lead of 100 mtrs, maintaining dry working area during excavation and for subsequent operations by way of construction of temporary trenches, channelizing the surface water, dewatering the subsoil water, shoring etc all complete as per specifications and directions of MIC. | | 300 | Cubic meter |
|---|
| 4 | 4 | Same as item no. 3, but for depth beyond 1.5 m (Payment up to 1.5 m depth shall be made under item no-3) | | 200 | Cubic meter |
|---|
| 5 | 5 | Same as item no. 3, but for Hard rock (blasting prohibited) at all depths. | | 5 | Cubic meter |
|---|
| 6 | 6 | Back Filling of available excavated earth (excluding rock) in foundations, trenches, plinths, etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by mechanical means/ manual means, ramming and watering, including loading, unloading, transportation by mechanical means all complete as per specifications and directions of MIC. | | 300 | Cubic meter |
|---|
| 7 | 7 | Disposal of surplus earth, dismantling materials, debris etc. generated during execution of work, including loading, unloading, transportation by mechanical means from site of work to designated areas on NALCO land lead upto 5 kms, spreading, compacting, dressing all complete as per specifications and direction of MIC. | | 500 | Cubic meter |
|---|
| 8 | 8 | Dismantling P.C.C/ R.C.C. work manually/ by mechanical means including cutting & stacking of steel bars and disposal of unserviceable material within 100 meters lead complete with all labours, tools etc complete as per specification and direction of manager in charge. | | 10 | Cubic meter |
|---|
| 9 | 9 | Dismantling brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 meters lead with all labours, tools etc complete as per the specifications and directions of MIC. | | 10 | Cubic meter |
|---|
| 10 | 10 | Supplying and filling good quality coarse sand in foundations, trench, under floors and other specified areas at all leads, lifts and locations including shuttering (if required), watering and ramming, all complete as per drawing, specifications and directions of MIC. | | 10 | Cubic meter |
|---|
| 11 | 11 | Providing and laying plain cement concrete 1:3:6 (1 cement: 3 Coarse sand : 6 course aggregate 20mm nominal size) in foundation, pavement, plinth etc upto a depth of 4.0 mtrs from G.L. including the cost of all materials, tools, tackles, labour, centering, shuttering, all complete as per drawings, specifications and directions of MIC. (Cement shall be issued free of cost at NALCO stores). | | 140 | Cubic meter |
|---|
| 12 | 12 | Providing and laying reinforced cement concrete of mix 1:1.5:3 (1 cement: 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size) in all types of RCC works such as rafts, columns, pedestals, pavement etc. for all leads and lifts, including transporting, placing in position, vibrating, finishing, curing etc as per site requirement, excluding the cost of centering and shuttering, all complete as per drawings, specifications and directions of MIC. (Cement and reinforcement steel shall be issued free of cost at NALCO stores). | | 500 | Cubic meter |
|---|
| 13 | 13 | Providing and fixing centering, shuttering, strutting, propping etc. for all types of works such as RCC foundations, retaining walls, columns, drains, culverts, pavements with good quality shuttering ply of any shape and size including firmly fixing in position with screws, bolts, separators, tension devices, true to line and level, stripping off the same after specified period etc. for all depths and heights, all complete as per the drawings, specifications and directions of MIC. | | 400 | Square meter |
|---|
| 14 | 14 | Fabricating and fixing in position HYSD steel reinforcement at all levels and positions including transportation from Nalco store, straightening, cutting, bending , cranking, welding, binding with wire of 18 gauge annealed wire conforming to IS 280, and providing cover blocks etc. for reinforced concrete, and any other place as specified complete, as per drawings, specifications and directions of MIC. (Payment will be made on the basis of standard weight per metre length of the bar, Reinforcement steel be issued free of cost at NALCO stores). | | 35 | Metric Tonne |
|---|
| 15 | 15 | Brickwork in CM 1:6 (1 cement: 6 coarse sand) using Cement based FLY ASH bricks in all types of works at all locations, including raking of joints, curing, scaffolding, with all bye works etc. All complete as per specifications and directions of MIC. (Cement & bricks shall be issued free of cost at NALCO stores). | | 50 | Cubic meter |
|---|
| 16 | 16 | Providing 12mm thick cement plaster with CM 1:6 (1 Cement : 6 Fine sand) on faces of walls, pillars, projection etc. including raking out joints, if any left out, necessary finishing to line and level, dabbing, curing, scaffolding, drip course wherever required at all heights and depths. All complete as per drawings, specifications and directions of MIC. (Cement shall be issued free of cost at NALCO stores). | | 300 | Square meter |
|---|
| 17 | 17 | Providing 15 mm thick cement plaster with CM 1:6(1 Cement : 6 Fine sand) on faces of walls, pillars, projection etc. including raking out joints, if any left out, necessary finishing to line and level, dabbing, curing, scaffolding, drip course wherever required at all heights and depths. All complete as per drawings, specifications and directions of MIC. (Cement shall be issued free of cost at NALCO stores). | | 250 | Square meter |
|---|
| 18 | 18 | 52 mm thick cement concrete flooring with non metallic hardener topping (of Fosroc/ Sika or equivalent) for heavy duty flooring , under layer 40 mm thick cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. all complete as per drawings, specifications and directions of MIC. (Cement shall be issued free of cost at NALCO stores). | | 900 | Square meter |
|---|
| 19 | 19 | Providing and laying 22.5 cm thick black granite boulders for boulder soling and filling the interstices with broken stones, ash/bottom ash available inside plant including loading, unloading, transporting of all materials, segregating, laying, packing with spoils, preparing the surface, watering, compacting with necessary number of passes using power road roller of 8 to 10 tonne capacity. All complete as per the specifications and directions of MIC. (Payments shall be made on the basis of consolidated thickness of boulder soling) | | 400 | Cubic meter |
|---|
| 20 | 20 | Supply, erection, installation and alignment of MS foundation bolts assembly, conforming to IS 5624 : 1993, in concrete along with nuts, lock nuts, anchor plates, stiffener plates, protective tape etc. including furnishing of labour, materials, equipments, welding, cutting, grinding, threading, drilling, pipe sleeves etc. all complete as per drawings, specifications and directions of MIC. | | 500 | Kilogram |
|---|
| 21 | 21 | Supplying and grouting pockets, under base plates etc with ready mixed non-shrink cementacious grout (Conbextra GP-2 of FOSROC or equivalent) of approved manufacturer at all locations including shuttering, curing etc. all complete as per manufacturer's specification and directions of MIC. | | 3.2 | Metric Tonne |
|---|
| 22 | 22 | Providing and applying two or more coats of 1st quality Acrylic washable distemper, Tractor brand of Asian paints Ltd. or equivalent paint of Berger/ ICI paints, of approved shade including two coats of primer on new work, including cost of labours, tools and tackles, scaffolding etc. complete for all heights as per the specification and direction of MIC. | | 200 | Square meter |
|---|
| 23 | 23 | Supplying and applying two or more coats of Exterior acrylic emulsion paint APEX ULTIMA of Asian paints/ Weather coat All Guard of Berger/ Weather shield Max of ICI paints of any approved shade to exterior surface after applying a coat of exterior primer including cost of labours, tools and tackles, scaffolding etc. complete for all heights as per the manufacturer specifications and direction of MIC. | | 350 | Square meter |
|---|
| 24 | 24 | Fabrication of steel structure in single or built up sections made out of all types of steel sections including carting from NALCO store, cutting, welding, grinding, brushing, cleaning the surface and applying a priming coat of approved steel primer (red oxide zinc chromate of Asian/ Berger make), return of surplus, scrap steel to NALCO stores/ scrap yard etc including the cost of all transportation, labour, consumables, tools etc., all complete at any elevation as per the specifications and direction of the Manager-in-charge. (Structural steel will be issued free of cost at NALCO store) | | 130 | Metric Tonne |
|---|
| 25 | 25 | Erection of steel structure in single or built up sections made out of all types of steel sections including the cost of welding, bolting, consumables, labour, tools, hoisting arrangement, transportation, cutting grooves/ holes for proper alignment etc all complete at any elevation as per the specifications and direction of the Manager-in-charge. | | 130 | Metric Tonne |
|---|
| 26 | 26 | Providing and fixing precoated galvanized iron profile sheets of TATA Bluescope LYSAGHT TRIMDEK 1015 or equivalent including Ridges plain (upto 600mm)/ Flashings/ Aprons (Upto 600 mm)/ Barge board (Upto 300 mm) etc. The sheets shall be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) , high tensile steel with minimum 550 MPa yield strength, metallic hot dipped coated with Al-Zn alloy (55% Aluminium. 43.5% Zinc, 1.5% Si), coating class AZ150 (min. 150 g/sqm total on both sides) as per IS 15961. Total coated thickness and Total Painted thickness of the sheets shall be 0.50 mm and 0.53 mm respectively. The sheets shall have a total coating thickness of 35 microns comprising of super durable polyester top coat of 20 microns on exposed surface, 5 micron reverse polyester coat on back surface and over 5 micron primer coat on both surfaces of approved colour suitable for exterior application conforming to IS 15965 class 3. The Sheets should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 6 metre. The sheets shall have brand mark at regular intervals on the reverse side of profile including name of the profile and Total Paint Thickness for confirming genuinity of the material. The manufacturer's test certificate for the chemical and mechanical properties must be submitted for approval by the concerned authority prior to installation. The sheet shall be fixed using self drilling /self tapping steel screws of Hilti/ Tata Bluescope/ Jindal stainless steel of size (5.5x 55 mm) with EPDM seal, all complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape, sealing of openings/ holes wherever required for all elevation as per specifications and directions of Manager-in-charge. | | 2000 | Square meter |
|---|
| 27 | 27 | Providing & fixing 2 mm thick UV stabilized fiberglass reinforced plastic sheets (trough sheet of size, shape and pitch of corrugation as approved by M-I-C). They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as approved by M-I-C. The sheet shall be fixed using self drilling /self tapping steel screws of Hilti make of size (5.5x 55 mm) with EPDM seal, all complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape, sealing of openings/ holes wherever required for all elevation as per specifications and directions of Manager-in-charge. | | 370 | Square meter |
|---|
| 28 | 28 | Providing and applying two coats synthetic enamel paint of Asian/ Berger make of any approved shade on steel structures including necessary scraping and cleaning the surface from loose dust, dirt, pill out paint, rust or any other foreign materials including the cost of all materials, labour, scaffolding etc. & removal of the scaffolding after the painting is over all complete at all elevation as per specifications and directions of M-I-C. | | 4500 | Square meter |
|---|
