Supply Of Op Wks Stores Supply Of Puf Insulated Water Tanks, ENGINEER STORE DET, SEVOKE ROAD, SILIGURI-West Bengal

Supply Of Op Wks Stores Supply Of Puf Insulated Water Tanks , Puf Insulated Water Tank Of 1000 Ltrs Capacity Of Olive Green / Camouflage Colour With Insulated Lid And Locking Arrangements , Make : Sintex / Patton / Polycon Or Equivalent :- ( A ) Inner Tanks Of Three Layer Made Of Hdpe / Ldpe Rational Moulded Vertical With Closed Top Of Is Specification And Isi Marked . ( B ) Insulation: Puf Insulation With Polyurethane From Of 50 To 75 Mm Thick With Insulation K Value 0 . 019 Kg / Cum-Hrs Degree Centigrade Of Density Minimum 42 Kg / Cum . ( C ) Outer Protection Layer For Puf With Frp 3Mm Layer Or As Specified By Manufactures Confirming To Is-8008 Pt 1 To 6 ) - 2003 . Note :- 1 . Puf Insulated Water Tank To Be One Piece Moulded . Third Party ( Other Than The Original Manufacturer ) Fabrication Will Not Be Acceted . 2 . Sample Of A Complete Puf Insulated Water Tank And A Core Cutting Of Size 1 X 1 Of Puf Tank To Be Produced To Technical Evaluation Committee At The Time Of Opening Of Technical Bids On Date Of Tender Opening To Check And Confirm With Correct Technical Specifications . If Vendor Fails To Produce The Sample At The Time Of Opening Of Tender , The Technical Bids In Respect Of The Vendor Will Be Rejected During Technical Evaluation . 3 . Please Note That Production Of Sample On The Date Of Opening Of Tender Does Not Warrant The Acceptance Of Technical Bids . The Bids Will Only Be Accepted In Case Of The Sample Fulfills The Correct Technical Specifications . , Puf Insulated Water Tank Of 500 Ltrs Capacity Of Olive Green / Camouflage Colour With Insulated Lid And Locking Arrangements , Make : Sintex / Patton / Polycon Or Equivalent :- ( A ) Inner Tanks Of Three Layer Made Of Hdpe / Ldpe Rational Moulded Vertical With Closed Top Of Is Specification And Isi Marked . ( B ) Insulation: Puf Insulation With Polyurethane From Of 50 To 75 Mm Thick With Insulation K Value 0 . 019 Kg / Cum-Hrs Degree Centigrade Of Density Minimum 42 Kg / Cum . ( C ) Outer Protection Layer For Puf With Frp 3Mm Layer Or As Specified By Manufactures Confirming To Is-8008 Pt 1 To 6 ) - 2003 . Note :- 1 . Puf Insulated Water Tank To Be One Piece Moulded . Third Party ( Other Than The Original Manufacturer ) Fabrication Will Not Be Acceted . 2 . Sample Of A Complete Puf Insulated Water Tank And A Core Cutting Of Size 1 X 1 Of Puf Tank To Be Produced To Technical Evaluation Committee At The Time Of Opening Of Technical Bids On Date Of Tender Opening To Check And Confirm With Correct Technical Specifications . If Vendor Fails To Produce The Sample At The Time Of Opening Of Tender , The Technical Bids In Respect Of The Vendor Will Be Rejected During Technical Evaluation . 3 . Please Note That Production Of Sample On The Date Of Opening Of Tender Does Not Warrant The Acceptance Of Technical Bids . The Bids Will Only Be Accepted In Case Of The Sample Fulfills The Correct Technical Specifications .

Refer document

INR 25000.0 /-

Refer document

Name of Work : Supply of PUF Insulated Water Tanks
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	PUF insulated Water Tank of 1000 Ltrs capacity of Olive Green/Camouflage Colour with insulated lid and locking arrangements, Make : Sintex/Patton/Polycon or equivalent :-\n(a) Inner tanks of three layer made of HDPE/LDPE rational moulded vertical with closed top of IS Specification and ISI Marked.\n(b) Insulation: PUF insulation with polyurethane from of 50 to 75 mm thick with insulation K value 0.019 Kg/cum-Hrs degree centigrade of density minimum 42 Kg/cum.\n(c) Outer protection layer for PUF with FRP 3mm layer or as specified by manufactures confirming to IS-8008 Pt 1 to 6) - 2003.\nNote :- \n1. PUF Insulated Water Tank to be one piece moulded. Third Party (other than the original manufacturer) fabrication will not be acceted.\n2. Sample of a complete PUF Insulated Water Tank and a core cutting of size 1' x 1' of PUF Tank to be produced to Technical Evaluation Committee at the time of opening of technical bids on date of tender opening to check and confirm with correct technical specifications. If vendor fails to produce the sample at the time of opening of tender, the technical bids in respect of the vendor will be rejected during technical evaluation.\n3. Please note that production of sample on the date of opening of tender does not warrant the acceptance of technical bids. The bids will only be accepted in case of the sample fulfills the correct technical specifications.	Item 1	18	Nos
2	2	PUF insulated Water Tank of 500 Ltrs capacity of Olive Green/Camouflage Colour with insulated lid and locking arrangements, Make : Sintex/Patton/Polycon or equivalent :-\n(a) Inner tanks of three layer made of HDPE/LDPE rational moulded vertical with closed top of IS Specification and ISI Marked.\n(b) Insulation: PUF insulation with polyurethane from of 50 to 75 mm thick with insulation K value 0.019 Kg/ cum-Hrs degree centigrade of density minimum 42 Kg/cum.\n(c) Outer protection layer for PUF with FRP 3mm layer or as specified by manufactures confirming to IS-8008 Pt 1 to 6) - 2003.\nNote :- \n1. PUF Insulated Water Tank to be one piece moulded. Third Party (other than the original manufacturer) fabrication will not be acceted.\n2. Sample of a complete PUF Insulated Water Tank and a core cutting of size 1' x 1' of PUF Tank to be produced to Technical Evaluation Committee at the time of opening of technical bids on date of tender opening to check and confirm with correct technical specifications. If vendor fails to produce the sample at the time of opening of tender, the technical bids in respect of the vendor will be rejected during technical evaluation.\n3. Please note that production of sample on the date of opening of tender does not warrant the acceptance of technical bids. The bids will only be accepted in case of the sample fulfills the correct technical specifications.	Item 2	4	Nos