Supplying And Fixing Auditorium Chairs For Kairali Balcony Theatre And Repairing And Maintenance Of Existing Chairs In Kairali Below Balcony And Sree Theatres Kozhikkode Supplying And Fixing Auditorium Chairs For Kairali Balcony Theatre And Repairing An
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2019
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikkode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying And Fixing Auditorium Chairs For Kairali Balcony Theatre And Repairing And Maintenance Of Existing Chairs In Kairali Below Balcony And Sree Theatres Kozhikkode Supplying And Fixing Auditorium Chairs For Kairali Balcony Theatre And Repairing And Maintenance Of Existing Chairs In Kairali Below Balcony And Sree Theatres Kozhikkode
BOQ
| Name of Work:Supply and fixing new Auditorium chairs in Kairali Theatre and Repairing, Maintenance of existing auditorium chairs at Kairali and Sree Theatre, Kozhikkode | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | \nDismantling and Removing the existing Auditorium Chairs (including seats, back rest and legs etc.) and stocking the materials carefully at the convenient place at site without any damages of seat and back rest cushions for re-use and also stocking the accessories as per the directions of Engineers at site.\n\n\n | BI01010001010000000000000515BI0100001113 | 1012 | Each |
| 2 | 2 | SUPPLYING AND FIXING OF AUDITORIUM PREMIUM PUSH BACK CHAIRS of size (overall in normal position) 600mm wide from the centerlines of arm rests, 600mm width from front to back, 1050 mm or above total height on back side with the following specifications. \nBACK REST FRAME:\n750mmx430/460mm or nearest size made with 22mm 16swg CR.Round pipe/18x18mm 16swg CR Square tube PU foam of 20mm topped over the frame and upholstery filled with Recron Fibre of virgin Conjugated hollow siliconized polyster fibre 15DN x 64 mm Cut Length of average 4”-5”thick with head rest & lumbard support with back cover of injection molded PPCP Tray. Back Frames stripped with 22swg CR sheet in suitable spacing and shape to support for upholstery work and all metal portion enamel paint finished.\nAll seats should provide our logo or emblem and seat numbers as selected should embroidery on the upholstery fabric head rest portion flap provided on the back rest. \nSEAT FRAME: 460 X 430 mm/460 mm or nearest size made with 25 mm sq.CR pipe/18 mm 16swg, square tube PU injection molded foam of 18” x 18”, average 40 mm/45mm thick of 55-58 kg/m3 density, and upholstery filled with Recron Fibre of virgin Conjugated hollow siliconized polyester fiber 15DN x 64 mm CUT LENGTH and bottom side covered with CR sheet of 22 swg and Seat Frames stripped with 12 mm x 3 mm flat and 3mm hard board in suitable spacing and shape to support PU foams and all metal portion enamel painted. \nSIDE STAND: 550 x 440 mm or nearest size made of 25 x25-16swg/40x20mm 18swg CR square tube and 25mm/40mm/6mm MS flat to meet the structural requirements and side covered with 22 swg CR sheet or 5mm thick fabric upholstery board. For all inside legs up to half portion and every end row legs should be completely covered with the fabric upholstery board and all the metal parts to be powder coated.\nARM REST: 450 x 55 x 50 mm or nearest size made up of injection molded PPCP (Poly propylene co polymer ) with cup holder, PU molded foam padding with fabric upholstery.\nMECHANISM : \nRoller and box type, made with 3 mm thick flats, 1” Sq.pipe 2 support stays, provided with hydraulic gas spring and all two coats of enamel paints furnished or lacquer finished. Rollers should be of minimum 14 mm thick of metal based and should be noiseless treated nylon casting.\nFABRIC: 3 mm foam laminated fabric of approved shade and should be specially made for theatre seating with scotch guard treated.\nFOUNDATION BOLT: Anchor expansion bolts of minimum 8 mm or stud bolts of minimum 2nos. for each side stands and should bonded with chemicals.\n.\n | BI01010001010000000000000515BI0100001114 | 214 | Each |
| 3 | 3 | Re-fixing the auditorium chairs (in Kairali and Sree Theatre) in correct position. Removing the existing fabric cover at seats and Back Rest and Supplying, stitching and fixing the seats and back rest cover using with foam backed scotch guard treated fabric of approved quality and colour including providing one layer 15mm thick ‘u’ foam wherever necessary. The rate including removing and desposing the existing fabric covers and refixing the chairs in correct position etc. complete. And replace the damaged cup holder type arm rest, spring mechanism including providing new side panels of seats etc. complete. | BI01010001010000000000000515BI0100001115 | 798 | Each |
AI Tender Summary
Tender Timeline
Oct 03, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender