Maintenance Of Completed Scheme Under North Zone . Maintenance/Up-Gradation Of Shops/Offices In Csc/Lsc Etc . At Hudson Lane , New Gupta Colony And Gujrawal Town , Phase-Iv ., Tender Documents-Delhi

Maintenance Of Completed Scheme Under North Zone . Maintenance / Up-Gradation Of Shops / Offices In Csc / Lsc Etc . At Hudson Lane , New Gupta Colony And Gujrawal Town , Phase-Iv .With Lime To Give An Even Shade : A ) Old Work ( Two Or More Coats ) , Finishing Walls With Water Proofing Cement Paint Of Required Shade : A ) Old Work ( One Or More Coats Applied @ 2 . 20 Kg / 10 Sqm ) Over Priming Coat Of Primer Applied @ 0 . 80 Litrs / 10 Sqm Complete Including Cost Of Priming Coat . , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : A ) One Or More Coats On Old Work , Cleaning Of Shops / Offices In Csc / Lsc Etc . Including Removal Of Lobwebs , Flushing Floor By Wet Duster Etc Complete . , Disposal Of Building Rubbish / Malba / Similar Unserviceable , Dismantled Or Waste Materials By Mechanical Means , Including Loading , Transporting , Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge , Beyond 50 M Initial Lead , For All Leads Including All Lifts Involved . , Renewing Glass Panes , With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: A ) Float Glass Panes Of Thickness 4 Mm , Supplying And Fixing Rolling Shutters Of Approved Make , Made Of Required Size M . S . Laths , Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks , Mounted On Specially Designed Pipe Shaft With Brackets , Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete , Including The Cost Of Providing And Fixing Necessary 27 . 5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M . S . Top Cover Of Required Thickness For Rolling Shutters . A ) 80X1 . 25 Mm M . S . Laths With 1 . 25 Mm Thick Top Cover , Applying Priming Coat: ( A ) With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron / Steel Works , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : A ) Two Or More Coats On New Work , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type , Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: A ) 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Aluminium Sliding Door Bolts , Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade , With Nuts And Screws Etc . Complete : ( A ) 300X16 Mm , Providing And Fixing Aluminium Tower Bolts , Isi Marked , Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade , With Necessary Screws Etc . Complete : ( A ) 250X10 Mm , 150X10 Mm , Providing And Fixing Aluminium Handles , Isi Marked , Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade , With Necessary Screws Etc . Complete : A ) 125 Mm

Refer document

INR 7592.0 /-

INR 3.79 Lakhs /-

Name of Work: M/o completed scheme under North Zone Subhead: Maintenance/up-gradation of shops/offices in CSC/LSC etc. at Hudson Lane, New Gupta Colony & Gujrawal Town, Phase-IV.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	White washing with lime to give an even shade : a)Old work (two or more coats)	BI01010001010000000000000515BI0100001113	1333	sqm
2	2	Finishing walls with water proofing cement paint of required shade : a)Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.\n		248	sqm
3	3	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a)One or more coats on old work		248	sqm
4	4	Cleaning of shops/offices in CSC/LSC etc. including removal of lobwebs, flushing floor by wet duster etc complete.		12	each
5	5	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.\n		49.15	cum
6	6	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a)Float glass panes of thickness 4 mm\n		184	sqm
7	7	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. a)80x1.25 mm M.S. laths with 1.25 mm thick top cover\n		39	sqm
8	8	Applying priming coat: (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)\n		9.24	sqm
9	8.1	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works\n		85.8	sqm
10	9	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a)Two or more coats on new work		95	sqm
11	10	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: a)35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws		4.2	sqm
12	11	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 300x16 mm		2	each
13	12	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 250x10 mm		2	each
14	12.1	150x10 mm	BI01010001010000000000000515BI0100001114	2	each
15	13	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : a)125 mm	BI01010001010000000000000515BI0100001115	4	each