Tender For Civil Works - Roads Work -T02 Pakri To Belwa Dih Mushari
Tender Value
47.58 Lakhs
Estimated cost
Bid Submission
05 Nov 2019
0 days left
EMD
47583
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Benipur → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Civil Works - Roads work -T02 Pakri To Belwa Dih Mushari
BOQ
| Name of Work: T02 Pakri to Belwa Dih Mushari | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | \nSetting Out\nSetting Out as MORD Specification 100 Item Nos (i), (ii), (iii) & (iv)\nConstruction of Reference & Working Benchmarks | 1 | nos | |
| 2 | 2 | Construction of Reference Pillars/Burjees | 2 | nos | |
| 3 | 3 | Clearing and Grubbing Road Land\nClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.\nBy Manual Means\nIn area of non-thorny jungle | 0.194 | Hect. | |
| 4 | 4 | Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per Technical Specification Clause 301.5 . \n For 1000 m lead @ 30 % | 284.661 | Cum | |
| 5 | 5 | Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per Technical Specification Clause 301.5 . \n For 100 m lead @ 70 % | 664.21 | Cum | |
| 6 | 6 | Construction of Subgrade\nConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.\n Construction of subgrade | 444.77 | Cum | |
| 7 | 7 | Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Sand), spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401. Grading I Material. | 349.835 | Cum | |
| 8 | 8 | WBM Grading 3 \nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.\n(A) By Manual Means | 159.216 | Cum | |
| 9 | 9 | Prime Coat (Low Porosity)\nProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 502 | 1185.75 | Sqm | |
| 10 | 10 | Tack Coat\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | 1185.75 | Sqm | |
| 11 | 11 | Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 | 1185.75 | Sqm | |
| 12 | 12 | Cement Concrete Pavement M30\nConstruction of un-reinforced,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. | 149.94 | Cum | |
| 13 | 13 | Hard Shouldering\nLaying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25mm thick layer of earth over brick soling, watering and rolling the same with three wheel road roller 80-100 kn as per Technical specification clause 412. | 122.5 | Sqm | |
| 14 | 14 | Kilometre Stone\nReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703\nOrdinary Kilometer Stone (Precast) | 2 | Each | |
| 15 | 15 | Kilometre Stone\nReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703\n200 m stone (precast) | 2 | Each | |
| 16 | 16 | MMGSY Sign Board\nProviding and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 3 | Each | |
| 17 | 17 | Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600 mm equilateral & triangle. | 2 | Each | |
| 18 | 18 | Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600 mm side circle. | 2 | Each | |
| 19 | 19 | Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600 mm x 450 mm rectangular | 2 | Each | |
| 20 | 20 | Boundary Pillar\nReinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 | 6 | Each | |
| 21 | 21 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface & Cement Concrete Pavement Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 62 | Sqm | |
| 22 | 22 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface & Cement Concrete Pavement Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 49 | Sqm | |
| 23 | 23 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. | 47.93 | Cum | |
| 24 | 24 | Type B ( First Class ) BeddingLaying (First Class) bedding on well compacted Local sand,approved material. | 5.69 | Cum | |
| 25 | 25 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nPCC M-15 | 4.33 | Cum | |
| 26 | 26 | Head wall in Brick masonry work in cement mortar (1:4)in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 | 40.77 | cum | |
| 27 | 27 | Providing and laying RCC pipe NP3 (600 mm dia)Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortor 1:2 but excluding excavation , protection works ,backfilling , concrete and masonary works in head walls and parapets clauses 1106 | 7.5 | M | |
| 28 | 28 | Providing and laying RCC pipe NP3 (1X1000 mm dia)Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortor 1:2 but excluding excavation , protection works ,backfilling , concrete and masonary works in head walls and parapets clauses 1106 | 7.5 | M | |
| 29 | 29 | Plastering with CM 1:4Plastering with CM 1:415mm thick on brickwork in substructureas per technical specification clause 613.4 & 1204 | 48.65 | sqm | |
| 30 | 30 | Painting on Concrete/Steel Surfaces with Epox Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701 | 48.65 | sqm | |
| 31 | 31 | 1st Year Maintenance\nRestoration of Raincuts/Berms with soil.moorum . | 28.097 | Cum | |
| 32 | 32 | Making up of Berms/shoulder, stripping excess soil from the shoulder surfaces to achieve level . | 156.094 | Sqm | |
| 33 | 33 | Maintenance of C/D Works (Hume Pipe Culvert) | 2 | No. | |
| 34 | 34 | (I)Cutting of branches of trees and shrubs | 1 | No. | |
| 35 | 35 | (ii) Cutting of shrubs from roadway | 4 | No. | |
| 36 | 36 | (iii) Trimming of grass and weeds | 8 | Sqm | |
| 37 | 37 | White washing of parapet walls of CD work and tree truncks | 42 | Sqm | |
| 38 | 38 | 2nd Year Maintenance\nRestoration of Raincuts/Berms with soil.moorum . | 33.716 | Cum | |
| 39 | 39 | Making up of Berms/shoulder, stripping excess soil from the shoulder surfaces to achieve level . | 187.313 | Sqm | |
| 40 | 40 | Maintenance of C/D Works (Hume Pipe Culvert) | 2 | No. | |
| 41 | 41 | Maintenance of Road signs | 0.555 | Km | |
| 42 | 42 | Maintenance of 200 m and km stones | 0.555 | Km | |
| 43 | 43 | (I)Cutting of branches of trees and shrubs | 1 | No. | |
| 44 | 44 | (ii) Cutting of shrubs from roadway | 4 | No. | |
| 45 | 45 | (iii) Trimming of grass and weeds | 8 | Sqm | |
| 46 | 46 | White washing of parapet walls of CD work and tree truncks | 42 | Sqm | |
| 47 | 47 | 3rd Year Maintenance\nRestoration of Raincuts/Berms with soil.moorum . | 39.336 | Cum | |
| 48 | 48 | Making up of Berms/shoulder, stripping excess soil from the shoulder surfaces to achieve level . | 218.531 | Sqm | |
| 49 | 49 | Repair of Pot holes filled with 75 mm BM X 1.25 | 1.635 | Cum | |
| 50 | 50 | Patch repair over Pot holevs with 13.2 mm to 0.09 mm Mix Seal Surfacing (Qty=L*Br*%taken) X 1.25 | 21.797 | Sqm | |
| 51 | 51 | Maintenance of C/D Works (Hume Pipe Culvert) | 2 | No. | |
| 52 | 52 | (I)Cutting of branches of trees and shrubs | 1 | No. | |
| 53 | 53 | (ii) Cutting of shrubs from roadway | 4 | No. | |
| 54 | 54 | (iii) Trimming of grass and weeds | 8 | Sqm | |
| 55 | 55 | White washing of parapet walls of CD work and tree truncks | 42 | Sqm | |
| 56 | 56 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface | 62 | Sqm | |
| 57 | 57 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Rigid Surface | 49 | Sqm | |
| 58 | 58 | 4th Year Maintenance\nRestoration of Raincuts/Berms with soil.moorum . | 44.955 | Cum | |
| 59 | 59 | Making up of Berms/shoulder, stripping excess soil from the shoulder surfaces to achieve level . | 249.75 | Cum | |
| 60 | 60 | Repair of Pot holes filled with 75 mm BM X 1.25 | 2.18 | Sqm | |
| 61 | 61 | Patch repair over Pot holevs with 13.2 mm to 0.09 mm Mix Seal Surfacing (Qty=L*Br*%taken) X 1.25 | 29.063 | Cum | |
| 62 | 62 | Maintenance of C/D Works (Hume Pipe Culvert) | 2 | M | |
| 63 | 63 | Maintenance of Road signs | 0.555 | No. | |
| 64 | 64 | Maintenance of 200 m and km stones | 0.555 | Km | |
| 65 | 65 | (I)Cutting of branches of trees and shrubs | 1 | Km | |
| 66 | 66 | (ii) Cutting of shrubs from roadway | 4 | No. | |
| 67 | 67 | (iii) Trimming of grass and weeds | 8 | No. | |
| 68 | 68 | White washing of parapet walls of CD work and tree truncks | 42 | Sqm | |
| 69 | 69 | 5th Year Maintenance\nRestoration of Raincuts/Berms with soil.moorum . | 50.574 | Cum | |
| 70 | 70 | Making up of Berms/shoulder, stripping excess soil from the shoulder surfaces to achieve level . | 280.969 | Sqm | |
| 71 | 71 | Repair of Pot holes filled with 75 mm BM X 1.25 | 2.725 | Cum | |
| 72 | 72 | Patch repair over Pot holevs with 13.2 mm to 0.09 mm Mix Seal Surfacing (Qty=L*Br*%taken) X 1.25 | 36.328 | Sqm | |
| 73 | 73 | Maintenance of C/D Works (Hume Pipe Culvert) | 2 | No. | |
| 74 | 74 | (I)Cutting of branches of trees and shrubs | 1 | No. | |
| 75 | 75 | (ii) Cutting of shrubs from roadway | 4 | No. | |
| 76 | 76 | (iii) Trimming of grass and weeds | 8 | Sqm | |
| 77 | 77 | White washing of parapet walls of CD work and tree truncks | 42 | Sqm | |
| 78 | 78 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface | 62 | Sqm | |
| 79 | 79 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Rigid Surface | 49 | Sqm | |
| 80 | 80 | GST Cost | 1 | Rate | |
| 81 | 81 | Labour Cess | 1 | Rate |
AI Tender Summary
Tender Timeline
Oct 01, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender