Supplying , Positioning And Installation Of Different Types Of Furnitures For Office Of Panchayat And Rural Development Department At 8Th Floor Of Subhanna At Plot No Df-09, Salt Lake , Kolkata-64.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2019
0 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Subhanna 8th Floor Plot No DF 09 Salt LakeE → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying , Positioning And Installation Of Different Types Of Furnitures For Office Of Panchayat And Rural Development Department At 8Th Floor Of Subhanna At Plot No Df-09, Salt Lake , Kolkata-64:-Table Maestro Set With Full Height Wooden Storage , Chair Sedna Very High Back , Chair Sedna Visitor , Sofa D-Lion 3 Seater , Sofa , Center Table Alice , Table Mayfair 1200 Set , Chair La Sede Visitor , Chair Kareena Visitor, Mid Height Wooden Storage Echo , Steel Almirah Storwel Plain , Supplying, Fitting & Fixing Of Cpu Trolley Complete , Supplying, Fitting & Fixing Of Kbpt Complete , Steel Storage 4 Door Personal Locker Unit , Table Eenterprise 1350 , Double Side Steel Book Rack , Single Side Steel Book Rack , Chair Bravo Visitor , Chair Bravo Mid Back , Table Eenterprise 1200 , Steel Storage 4 Door Book Case , Steel Almirah Storwel Model 2, Table Finnesse 5026 With Half Height Wooden Storage , Etc.
BOQ
| Name of Work: Supplying , positioning and installation of different types of furnitures for office of Panchayat and Rural Development Department at 8th floor of Subhanna at Plot No DF-09, Salt Lake , Kolkata-64. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Table Maestro Set With Full Height Wooden Storage : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made Executive table-Main Material:Particle Board with the density of 680 kg / m³.Surface:CPL (Continuous Pressure Laminate) in 0.5 mm thickness. Process: Postforming in DuckNosed Profile.Edging:2 mm PVC Edging, Black color.Table Top:25 mm MFC (Melamine Faced Chipboard), plus 30 mm.MDF (Medium Density Fiberboard) black pad.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad.Free standing return desk:Table Top:25 mm MFC.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad. Pedestal: Top Panel:25 mm MFC,All Other Panels:18 mm MFC,Lock,Castors :Provided,Handle: Metal.Back Unit :Over all dimension of the back unit is 2000mm Width x 400mm Depth x 1190mm Height.Back unit top panel is made up of 18mm x 2layers (i.e. 36mm) MFC top with maple coloured melamine finish. The 2 distinct layers are highlighted by the twin colour 2mm thick PVC lipping (maple & grey).Back unit has 5 wooden hinged doors and one open shelf.Back unit doors are 18mm thick in maple. There is no locking provision in back unit.The side panels (18mm thick) are in grey colour.The back panel of cabinet is 8 mm thick MFC with melamine.Legs are made up of PVC in black colour.There is a background panel on the cabinet top back.There are 6 fixed plastic legs of 60mm under the cabinet.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | Nos | |
| 2 | 2 | Chair Sedna Very High Back : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made visitor chair:The seat is made up of hot pressed moulded reconstituted wood of 12mm average thickness and back is two part injection moulded plastic.SEAT SIZE:49.0cm (W) X 49.5cm (D).BACK: 46.0 cm (W) X 49.0 cm (H).The Polyurethane foam is moulded in Density 45 kg/m³, Hardness 20.The Understructure is welded structure made up of M.S.E.R.W. Elliptical tube. The understructure is powder coated.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 3 | 3 | Chair Sedna Visitor : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made visitor chair:The seat is made up of hot pressed moulded reconstituted wood of 12mm average thickness and back is two part injection moulded plastic.SEAT SIZE:49.0cm (W) X 49.5cm (D).BACK: 46.0 cm (W) X 49.0 cm (H).The Polyurethane foam is moulded in Density 45 kg/m³, Hardness 20.The Understructure is welded structure made up of M.S.E.R.W. Elliptical tube. The understructure is powder coated.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 8 | Nos | |
| 4 | 4 | Sofa D-Lion 3 Seater : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made sofa D lion 3 Seater syn Lth Sofa, farme made of Tropical Seasoned Hard Wooden Fascia is of MDF with Melamine coating & Combination of Particle Board. Dim of 2000 mm W x 880 mm D x 780 mm H x 450 mm Seat Height.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 5 | 5 | Sofa D-Lion 1 Seater : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made sofa D lion of 1 Seater syn Lth Sofa, farme made of Tropical Seasoned Hard Wooden Fascia is of MDF with Melamine coating & Combination of Particle Board. Dim of 1000 mm W x 880 mm D x 780 mm H x 450 mm Seat Height.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 6 | 6 | Center Table Alice : Coffe Table \"Alice\" Dimension (in cm):100(W) x 65(D) x 45(H),Preferably Godrej or of Howorth , Herman Miller made-'Home Range Catalouge-2018' Page-22.(Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 7 | 7 | Table Mayfair 1200 Set : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made made Table:The table top is in white cedar, side panels are in black, while the modesty panel is a combination of black & white cedar.The two drawer (1 box drawer & 1 filing drawer) Mobiles Pedestal is available in one size: 390 x 435 x529mm. The top & drawer fronts are in white cedar while the other components are in black.Tops / Work surfaces Made from 18mm thick PLB with PVC lipping.Side Panels Made form 18mm thick PLT with PVC lipping.Modesty Panel Made form 18mm thick PLT with PVC lipping. Bigger upper panel in Black and smaller lower panel in white Cedar.Shelf Storage units and Open shelf ERU Made form 18mm thick PLT with PVC lipping.Doors of Storage Units HDU with 2doors and adjustable shelf. Made from 18mm thick PLT with PVC lipping.Mobile Pedestal One Box and one Filing drawer with 18mm thick PLB fronts and top.Handles Black Powder coated Die cast Aluminum alloy handles.Mobile Pedestal and HDU are fitted with central Lock.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 8 | 8 | Chair La Sede Visitor : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made executive visitor chair:The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with pure leather and moulded high resilience (HR) polyurethane foam of density 45± 2 kg/m³,and hardness load 16±2 kgf as per IS:7888 for 25% compression.Seat Size: 47.6 cm.(W) x 49.2 cm. (D).The cushioned back is made of PU foam with insitu molded MS E.R.W. round tube of size 1.9±0.03 cm x 0.16 ±0.0128 cm.It upholstered with pure leather.High Back size : 46.5 cm. (W) x 59.5 cm. (D).The tubular frame is cantilever type & made of Ø 2.54± 0.03 cm x 0.2±0.016 cm thk S.S. 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 5 | Nos | |
| 9 | 9 | Chair Kareena Visitor: Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made visitor chair:The seat is made up of 1.2 cm. thick hot pressed plywood upholstered with fabric and moulded Polyurethane Foam. The back is made up 1.2-cm. thk. hot pressed plywood upholstered with replaceable fabric upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture.BACK SIZE:48cm. (W) X 66.0cm. (H).SEAT SIZE:50.0cm. (W) X 49.5cm. (H).The polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2.The armrest top is injection moulded from polyurethene(P.U) and mounted on to a fixed type M.S. tubular armrest support. The arm support has static vertical adjustment of +/-1.5cm.Leg frame welded assembly made from 35 X 15 X 16BG(1.6THK) elliptical MS ERW tube with base plate for seat fixing. Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 22 | Nos | |
| 10 | 10 | Mid height wooden storage Echo : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made wooden storage:Construction & Metarials:Construction is a knockdown construction of 25 mm thk and 18 mm thk pre-laminated board with metal cladding of 0.8 mm thk C.R.C.A. from outside.Side metal cladding is coated with epoxy polyster powder of 50 ± 10 microns thickness.Top:wooden top is provided which is made of 25 mm thick pre-laminated board.Door & Door opening: single door opening for 450 & 600 W units whereas two door opening. The doors are made of 18 mm thk pre-laminated with decorative laminate on one side and backing laminate on the other side.Shelving:Height wise adjustable shelf mounting holes provided on side panels for easy interchange of shelf height as required.Fixed shelves along with adjustable shelves provided.Uniformly distributed load capacity for each shelf is 40 kg maximum.Skirting Option:The skirting units are provided with 150 mm high skirting made of 0.8 mm thick C.R.C.A. coated with epoxy polyester powder of 50 ± 10 microns thickness.Leveler:Screw type adjustible leveler with plastic base provides vertical adjustment for floor unevenness and leveling of units.Back Panels:Back panels are made of 18 mm thick pre-laminated boards with options of decorative laminate as well as fabric finishes.Locking Mechanism:3-way nickel plated wooden furniture lock is provided for effective and positive locking of doors.Handle:A esthetically appealing recessed handles of aluminium extrusion are provided for easy opening and closing.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 6 | Nos | |
| 11 | 11 | Steel Almirah Storwel Plain : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made made steel Almirah:Size:Plain (4S) - 916 mm (W) x 486 mm (D) x 1981 mm (H),Construction & Material:Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Mazak Handle.3 way locking mechanism with shooting bolt arrangement. Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain 4S : 4 Nos. of Adjustable Full Shelves. Leveler:M10 Screw type leveler with hex plastic base.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Complete as per proposed layout and direction of Engineer in charge.\n\n | 37 | Nos | |
| 12 | 12 | Conference Table Senate (18 SEATER): Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made e conference table:Work surface:Top thickness 31.6 (18mm + 12mm + 0.6 mm DL(both sides) + 0.4mm Membrane).Edge profile Waterfall Edge 10mm radius on top edge and 5mm at bottom.Legs:Made from 25mm PPB having a straight profile with half round edges and clad with 0.6mm thick Post Forming laminate. Overall thickness of leg is 26.2mm.Modesty Panel:Made from PLT (Prelaminated Twin) boards of 18mm thick.Skin:PVC Membrane foil (0.4mm thk) clad on the substrate MDF using PU glue for better adhesion. This foil is pre-coated with layer of polyurethane for better scratch resistance.Wire Carrier:Made from 0.6mm thick CRCA painted.Carrier Cover:Made of 12mm thk. MDF Painted all over.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n | 1 | No | |
| 13 | 13 | Chair Beat High Back Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made high back chair:The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H).SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The adjustable armrest is designed with the following features :Up-Down adjustment– 8 steps (8.0±0.5 cm range).Height adjustable armrest structure which is powder coated & fitted with an armrest top.Fixed Armrest Top is PU molded over metal insert.The adjustable tilting mechanism is designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.Back can be adjusted in 5 positions by manually.Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair.The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).The twin wheel castors are injection moulded in black Nylon.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n | 16 | Nos | |
| 14 | 14 | Chair Sedna Mid Back Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made mid back chair:The seat is made up of hot pressed moulded reconstituted wood of 12mm average thickness and back is two part injection moulded plastic.SEAT SIZE:49.0cm (W) X 49.5cm (D).BACK: 46.0 cm (W) X 49.0 cm (H).The Polyurethane foam is moulded in Density 45 kg/m³, Hardness 20.The armrests are Pressure die casted in polished Aluminium with PP Arm Tops.The synchronized mechanism is designed with the following features: 360° revolving type.Backrest tilt (20.50), Seat tilt (70) ratio of 1:3.Side tilt tension adjustment knob can be operated while taking back support for better judgment of comfort.Back tilt with 4 position locking.The pneumatic height adjustment has an adjustment stroke of 10.0 cm.Backrest is connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0 cm for the comfortable back support to suitable individual need.The pedestal is Pressure Die cast polished Aluminium. The pedestal pitch-center dia. is 65.0cm.5 Nos. twin wheel castors are injection moulded in Black PP having 60mm wheel Diameter and assembled to Aluminum pedestal.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 1 | No | |
| 15 | 15 | Desklet Chair 7004XD : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made desklet chair:The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort.BACK SIZE:49.0cm. (W) X 47.0cm. (H).SEAT SIZE:49.0cm. (W) X 44.0cm. (D).The polyurethane foam is moulded with density = 45 +/-2 kg/m³ and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The tubular frame is cantilever type & made of Dia.2.54cm. (1”) x 14 BG M.S. E.R.W. tube and black powder coated. The Armrest Tube of Dia.2.54cm. (1”) x 14 BG M.S. E.R.W. tube is welded to mainframe. The desklet is fitted on the right hand side.The wooden desklet is made of 1.8cm. thk. pre-laminated chipboard with 2mm. thk. P.V.C lipping all around.SIZE: 54.0cm. (W) X 29.0cm. (D).The armrests are made from chemically treated & seasoned wood with black melamine polish.The paper tray is made of 0.2cm. dia. M.S. wire spot welded to form a mesh. It is black powder coated.SIZE: 34.5cm. (W) X 35.0cm. (D).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 23 | Nos | |
| 16 | 16 | Table Finnesse 5026 With Full Height Wooden Storage :Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made executive table:Main desk:25 mm thick plain partical board clad with 0.6 mm thick post formed laminats and 1 mm thick backing laminate.Flat edge duly sealed with 2 mm thick PVC beading.Modesty:18 mm thick plain partical board clad with 1.0 mm thick decorative laminate on both sides.Edge sealed with 2 mm thick PVC beading.ERU (Top & Side Panel):25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate.Flat edge duly sealed with 2 mm thick PVC beading.Modesty:18 mm thick plain particle board clad with 1.0 mm thick decorative laminate on both sides.Edge sealed with 2 mm thick PVC beading.Back Unit :Over all dimension of the back unit is 2000mm Width x 400mm Depth x 1190mm Height.Back unit top panel is made up of 18mm x 2layers (i.e. 36mm) MFC top with maple coloured melamine finish. The 2 distinct layers are highlighted by the twin colour 2mm thick PVC lipping (maple & grey).Back unit has 5 wooden hinged doors and one open shelf.Back unit doors are 18mm thick in maple. There is no locking provision in back unit.The side panels (18mm thick) are in grey colour.The back panel of cabinet is 8 mm thick MFC with melamine.Legs are made up of PVC in black colour.There is a background panel on the cabinet top back.There are 6 fixed plastic legs of 60mm under the cabinet.Complete as per proposed layout and direction of Engineer in charge.\n\n | 3 | Nos | |
| 17 | 17 | Table Finnesse 5026 with half height wooden storage : Set Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made executive table:Main desk:25 mm thick plain partical board clad with 0.6 mm thick post formed laminats and 1 mm thick backing laminate.Flat edge duly sealed with 2 mm thick PVC beading.Modesty:18 mm thick plain partical board clad with 1.0 mm thick decorative laminate on both sides.Edge sealed with 2 mm thick PVC beading.ERU (Top & Side Panel):25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate.Flat edge duly sealed with 2 mm thick PVC beading.Modesty:18 mm thick plain particle board clad with 1.0 mm thick decorative laminate on both sides.Edge sealed with 2 mm thick PVC beading.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n | 1 | Nos | |
| 18 | 18 | Steel Almirah Storwel Model 2 : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made steel Almirah:Product Size:916 mm(W) x 486 mm (D) x 1980 mm (H).Construction & Material:Welded construction.0.7 mm thk CRCA for shelf.0.8 mm thk CRCA for back & locker shelf.0.9 mm thk CRCA for all other components.Locking & handle:Mazak handle.Three way locking mechanism with shooting bolt.Locker:Fixed full locker with secret compartment.Hinged door.2 way locking mechanism for locker door.Shelving:Height wise adjustable shelf mounting.2nos. of adjustable full shelf.Hanging rod & tie bar:1.0 mm thk ERW tube for hanging rod.1.0 mm thk aluminum for tie bar.Leveler:M10 screw type leveler with hex plastic base.Finish:Epoxy powder coated to the thickness of 50 microns(±10).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges)\n\n | 3 | Nos | |
| 19 | 19 | Steel Storage 4 Door Book Case : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made steel storage:Size:914 mm (W) x 320 mm (D) x 1742 mm (H) for 4 Door.Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel - Panels & Frame from 0.8 mm thick.Configuration (Doors):4 Door.Door Features / Locking:Each Door has 10 Lever Cam lock with common key.Each Door has 3 mm Thk transparent glass for clear inside vision secured in a Metal Frame through rubber gasket.Each door has a Scissor mechanism for receding inside the top of respective compartment & ensures parallel & smooth movement.Each door has Plastic side end caps as Handle which is easy to grip.Behind Storage Shelving:Each compartment has storage shelf.Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.Top Panel:4 Door has Inside Metal Top Panel.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 8 | Nos | |
| 20 | 20 | Table Eenterprise 1200 : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made office table: Work surface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Leg:Fabricated component in 38mmx25mmx1.2 mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).CPU Modesty :0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt. Pedestal :Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Drawer Front :0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier: 0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 40 | Nos | |
| 21 | 21 | Chair Bravo Mid Back : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made office chair:The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE:47.5 cm. (W) x 58.0 cm. (H).SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D).The Polyurethane foam is moulded with density = 45±2 kg/m³ and Hardness = 20±2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The mechanism is designed with the following features:360° revolving type.Upright position locking.Tilt tension adjustment.Seat/back tilting ratio of 1:3 (6° seat tilt/18° back tilt).The pneumatic height adjustment has an adjustment stroke of 12.0 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3cm. pitch-center dia. (76.3 cm with castors).The twin wheel castors are injection moulded in Black Nylon.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 49 | Nos | |
| 22 | 22 | Chair Bravo Visitor : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made office visitor chair:The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE:47.5 cm. (W) x 58.0 cm. (H).SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D).The Polyurethane foam is moulded with density = 45±2 kg/m³ and Hardness = 20±2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 42 | Nos | |
| 23 | 23 | Single Side Steel Book Rack : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made single side steel book rack:Construction:Rigid knockdown construction. Material:CRCA 0.8mm Thickness.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Stackability:The add-on units can be stacked width wise to form a bank of racks having common side panel.Number of Adjustable shelf:five adjustable shelves. (Total 6 Loading levels).Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Shelf back stiffener:At the rear side of the shelves back stiffeners are provided. These are to support books on the rear side.Label holder & range indicator:Label Holder & Range indicator on each main unit for inserting labels.Accessories:Optional stand of 125 mm Height with leveling screws.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 11 | Nos | |
| 24 | 24 | Double Side Steel Book Rack : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made double side steel book rack:Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel - Panels from 0.8 mm thick,Side panels:27mm thk Prelaminated particle board (PLB) with laminate on both sides.Stackability:The add-on units can be stacked width wise to form a bank of racks having common side panel. Configuration (Racks):5 Level Racks per unit.Display Tray:Suitable for magazines, periodicals.Aesthetically appealing Metal tray at an angle for easy viewing.Receding facility to access the storage behind. Sliding on plastic rollers.Behind Storage Shelving:Each of 5 level has a behind storage shelf Uniformly Distributed Load Capacity per each shelf is 35 Kg maximum.Skirting Width:For 1 wide unit / 2 wide unit / 3 wide unit.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 4 | Nos | |
| 25 | 25 | Table Eenterprise 1350 : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made office table:Worksurface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Leg:Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).CPU Modesty:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt.Pedestal:Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Drawer Front:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier:0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 10 | Nos | |
| 26 | 26 | Sofa Midas 3 Seater : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made 3 seater sofa:The Midas sofa is a lounge seating system standing on beam with side frame assemblies.The Midas sofa is a lounge seating system standing on beam with side frame assemblies.assembly. It is made of MS. E.R.W. tube dia 4.44 cm. (1.75”) x 14 BG. thk and chrome plated.The ST/BK mounting frame assy. holds the two side frames together. The mounting frames, 2nos are used to connect the side frames. The mounting frame is made of MS. E.R.W. tube dia.5.08cm. (2”) x 10BG thk. black painted. The ST/BK is mounted on 14 BG thk 2cm x 4cm Recta tube which are welded on the beam of ST/BK mounting frame.The ST/BK assembly consists of 12mm thk plywood insert with Polyurethane foam having density = 45 +/- 2 Kg/cm³ and hardness of the P.U. foam = 18 to 22 Kg on Hampden m/c for 25% compression of the foam. The complete moulded ST/BK assembly is covered with a replaceable fabric upholstery cover.ST/BK SIZE: 54.5cm. (W) X 46.7cm. (D) X 12.5cm. (T).The side frames are fitted with front and rear bottom shoes made of injection moulded polypropylene.All external surfaces are chrome-plated and withstands min of 100hrs in salt spray test.Velvetine plus is a stain repellant fabric. The velvet fabric can be vacuum cleaned in order to remove dirt & grit from the fabric surface. Upholstery covers made from velvetine fabric should not be soap washed or dry cleaned.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 1 | No | |
| 27 | 27 | Steel Storage 4 Door Personal Locker Unit : Supplying,fitting & fixing of Preferably Godrej or of Howorth , Herman Miller made personal 4 door steel storage:Product Size:380mm(W) x 450mm(D) x 1830mm(H). Stackability:The add-on units can be stacked width wise to form bank of lockers having common side panel.Locking:10 Lever cam lock with lock lever.Material:CRCA 0.6mm Thickness.Construction:Rigid knockdown construction.Shelf:Uniformly Distributed Load Capacity per each shelf level is 35 Kg maximum.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Handle / Label holder:Aesthetically appealing Snap fit ABS plastic handle.Plastic label holder for identification.Ventilation:Attractive punched pattern for ventilation.Accessories (Optional):Stand for 1 wide, 2 wide and 3 wide – 125 mm High (add to unit height) inclusive of Leveler.Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 9 | Nos | |
| 28 | 28 | Supplying,fitting & fixing of KBPT Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 54 | Nos | |
| 29 | 29 | Supplying,fitting & fixing of CPU Trolley Complete as per proposed layout and direction of Engineer in charge. (Rate includes GST , CESS , Contractors Profit , Carriage , Loading & Unloading , Lifting , fitting & fixing and all other incidental charges) | 3 | Nos |
AI Tender Summary
Tender Timeline
Oct 01, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 24, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender