Construction Of Bhamber To Samled Road Km 0/0 To 1/200 Under Scsp C/O Both Side Approaches Of 4 . 00 Mtr . Span Culvert At Rd 0/105 And C/O New Road In Km 0/116 To 0/175
Tender Value
11.74 Lakhs
Estimated cost
Bid Submission
15 Oct 2019
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisinghpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bhamber To Samled Road Km 0/0 To 1/200 Under Scsp C/O Both Side Approaches Of 4 . 00 Mtr . Span Culvert At Rd 0/105 And C/O New Road In Km 0/116 To 0/175
BOQ
| Name of Work: C/O Additional Accommodation 50 bedded Hospital at Jaisinghpur Distt. Kangra (HP) (SH:- Construction of Main building including Water supply Sanitary and Rain water Harvesting system ) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable materials clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeters) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed materials to be neatly dressed and leveled as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 589.9 | Per Cubic Metre | |
| 2 | 2 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 49.63 | Per Cubic Metre | |
| 3 | 3 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 151.36 | Per Square Metre | |
| 4 | 4 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 809.4 | Per Square Metre | |
| 5 | 5 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1138.45 | Per Square Metre | |
| 6 | 6 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1103.16 | Per Square Metre | |
| 7 | 7 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 320.62 | Per Running Metre | |
| 8 | 8 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 45 | Per Square Metre | |
| 9 | 9 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing, as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 133.54 | Per Square Metre | |
| 10 | 10 | Providing and laying mechanically mixed cement concrete 1:6:12 (one cement is to six sand is to twelve graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 43.06 | Per Cubic Metre | |
| 11 | 11 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 40.36 | Per Cubic Metre | |
| 12 | 12 | Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimetre) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 58.64 | Per Cubic Metre | |
| 13 | 13 | Providing and laying cement concrete work of grade M-20 design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kgs (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns ,pillars, post, struts and the like and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 73.9 | Per Cubic Metre | |
| 14 | 14 | Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimetre) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor ,roofs , landings , shelves and their supports balconies, beams ,girders , bressumers and cantilevers up to all floor level as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 442.64 | Per Cubic Metre | |
| 15 | 15 | Providing and laying plain cement concrete M-20 ( M- Twenty) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 11.15 | Per Cubic Metre | |
| 16 | 16 | Providing and laying mechanically mixed and vibrated cement concrete M-20 ( M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less then 320 Kg (three hundred twenty kilogram) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( any thickness but not less than 0.10 (zero point ten) Metre thickness) including attached pilasters buttresses, plinth and string courses etc. from top of foundation up to floor all levels as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 14.4 | Per Cubic Metre | |
| 17 | 17 | Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum Compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair cases) including landings etcetera up to floor all levels as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 21.96 | Per Cubic Metre | |
| 18 | 18 | Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete including cost of form work but excluding reinforcement for reinforced concrete work moulding as in cornices windows, sills etcetera exceeding 15cm (fifteen cetimetres) in girth upto floor all level as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3.06 | Per Cubic Metre | |
| 19 | 19 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20 N/ mm2 (Twenty Newton per square millimetre) with cement contents not less than of 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete in reinforced concrete work in Chhajjas not exceeding 10cm (ten centimetres) thickness upto floor all levels including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floors level as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 4.32 | Per Cubic Metre | |
| 20 | 20 | Providing and Fixing RCC Jali in Jafri pattern complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 15.75 | Per square Metre | |
| 21 | 21 | Providing and Fixing I.R.C Jali in Dormer complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 8.1 | Per square Metre | |
| 22 | 22 | Providing Tor steel reinforcement of TATA/SAIL/TISCO for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 112301 | Per Kilogram | |
| 23 | 23 | Providing and laying Damp Proof Course with 100mm (One hundred millimetres) thick cement concrete 1:2:4((one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 49.63 | Per Square metre | |
| 24 | 24 | Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred) using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 49.63 | Per Square metre | |
| 25 | 25 | Second class brick work using common burnt clay building bricks in superstructure above plinth level to floor all levels in cement mortar 1:6 (one cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 322.73 | Per Cubic Metre | |
| 26 | 26 | Half brick masonry using second class common brunt clay building bricks in super structure above plinth level to floor all levels in cement mortar 1:4 (one cement is to four sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 474.89 | Per Square Metre | |
| 27 | 27 | Random rubble masonry /polygonal rubble masonry (un-coursed/ brought to courses) with hand stone of approved quality in foundation and plinth in cement mortar 1:6 (one cement : six sand ) including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded crushed stone aggregate twelve mm nominal size) and curing complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 11.22 | Per Cubic Metre | |
| 28 | 28 | Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17.33 | Per Cubic Metre | |
| 29 | 29 | Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement is to five sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 40.23 | Per Cubic Metre | |
| 30 | 30 | Boulder filling of hard stone of approved quality dry hand packed tightly under floor. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 61.05 | Per Cubic Metre | |
| 31 | 31 | Brick bat aggregate in soak pit as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 31.08 | Per Cubic Metre | |
| 32 | 32 | Providing and fixing angle iron door frames (single rebate) manufactured with frame for steel section of 40x40x6mm (Forty into forty into six Millimetres) and M.S. flat 50x4 mm (Fifty into four millimetre) in combination as per Drawing and design including hinges jambs, locks, mild steel M.S. angle 50x25mm (Fifty into twenty five Millimetres) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel butt hinges 2.5mm (Two point five millimetre) thick with provision of locking arrangement and shock observers as specified and applying a coat of special steel primer as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 239.75 | Per Running metre. | |
| 33 | 33 | Providing and fixing M.S. channels in doors and windows frames manufactured from M.S. channels section 75x40mm (Seventy five into Forty Millimetres) and M.S. flat 75x4mm (Seventy five into Four Millimetres) combination as per design, drawing including hinges, jambs, beads if required, threshold of M.S. angles means, lugs with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal Five Millimetres) thick with a provision of locking arrangements, shock absorbers as specified and applying coat of approved steel primer after pre-treatment of surfaces as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 794.5 | Per running meter | |
| 34 | 34 | Providing and fixing angle iron cup-board (frame manufactured from M.S angle iron sections 25x25x5mm (Twenty five into twenty five into five millimetre) thickness including jamb, lock jamb bead and if required, angle threshold of mild steel angles 25x25mm (twenty five into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with split end tails to each jambs including steel butt hinges 2.5 mm (Two point five millimetre) thick with provision for locking arrangements and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surfaces as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 59.76 | Per Running metre. | |
| 35 | 35 | Providing and fixing 19mm (Nineteen millimetres) thick water proof termite resistant commercial board of Uniply / Green ply in shelves/box for cupboard with butt joints & fixing with nails & screws etc complete) as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 47.49 | Per Square Metre | |
| 36 | 36 | Providing and fixing 6 mm ( six millimetre) thick commercial ply wood lining/partition lining / partition of approved quality with butt jointing and nails including providing and fixing bottom frame 40x40(forty into forty millimetre) in 2nd class deodar wood and cover filets beading 60x12mm (sixty into twelve millimetre) section of 1st class Indian teak wood in joints of partition and to be painted with white synthetic enamel paint complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 14.75 | Per Square Metre | |
| 37 | 37 | Providing and fixing 19mm (Nineteen Millimetres) thick commercial board cupboard shutter and all cut portion of shutter shall be finished with 6/12mm (Six/twelve millimetres) thick hard wood edging including nickel plated bright finished piano hinges with screws complete, as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 33.83 | Per Square Metre | |
| 38 | 38 | Providing and fixing 1.00mm thick colored or plain lamination sheet (sun mica) ISI marked No.12823 of approved shade of Kit vista or Kit ply on boards/ply wood sheets with approved adhesive and nails etc complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 16.17 | Per square meter | |
| 39 | 39 | Providing and Fixing glazing with glass panes of 5 mm (Five milimertres) thickness (weight not less than 13.75 kg/sqm (Thirteen decimal Seven five kilogram per square metres) in door, windows, ventilator, shutters and partitions etcetera; with PVC/Neoprene gasket etcetera; complete as per the architectural drawings and the direction of Engineer-In-Charge (Cost of aluminum snap beading shall be paid separately) including carriage of material within all leads, lifts and other incidentals, as per specifications approved drawing, design and as directed by the Engineer- in-charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 80.66 | Per square meter | |
| 40 | 40 | Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimetre) and 8 x 8 mm ( eight into eight millimetres) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 2813.23 | Per Kilogram | |
| 41 | 41 | Providing and fixing factory made flush door shutter 35mm thick (thirty five millimetre), commercial both side i.e. non decorative, (Phenol bounded, termite resistant and water proof) core of block board construction with full frame of first class hard wood well matched commercial 3 (three) ply veneer with vertical grain or cross bend & face veneer on both sides of flush door ISI marked No. IS 2202 of kit ply/Alpro including black enameled M.S. butt hinges, Screws etcetera complete .As per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 119.65 | Per square meter | |
| 42 | 42 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16 x3.15 mm (Sixteen into three decimal one five millimetre) iron lugs 10 cm (Ten centimetres) long embedded in cement - concrete blocks 15cm x 10cm x 10 cm (fifteen into ten into ten centimetres) size of 1:3:6 (one cement : three sand: 6 stone aggregate ) 20mm (twenty millimetre) nominal size or with wooden plugs and screws rawl plugs and screws or with fixing clips or bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paints as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 43 | 42.01 | i) Fixed steel windows. | 37.8 | Per Square metre | |
| 44 | 42.02 | ii) Top hung ventilator | 15.75 | Per Square metre | |
| 45 | 43 | Providing and fixing factory made double steel shutter windows side huge (one glazed and other wire gauge ) of standard rolled steel section jointing, mitered, welded and manufactured to relevant ISI standard specifications with steel plugs and screws or rawl plugs/ screws or with fixing clips or with bolts and nuts as required and iron fittings , including providing and fixing of glass pans with glazing clips and special metal sash putty for glazed side of shutter and wire gauge of ISI designation 85G with metal beading on other side complete including priming coat of red lead paint as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 105.93 | Per square metre | |
| 46 | 44 | Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clear story windows including bright finished black enameled iron hinges with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 25.25 | Per square metre | |
| 47 | 45 | Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete 300 X 16 mm (three hundred into sixteen millimetre) size as per specifications approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 28 | Each | |
| 48 | 45.01 | 250 X 16 mm (two hundred fifty into sixteen millimetres) size | 23 | Each | |
| 49 | 46 | Providing and fixing aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 50 | 46.01 | a) 250 x 10 mm (Two hundred fifty into ten millimetres) | 510 | Each | |
| 51 | 46.02 | b) 100 x 10 mm (one hundred into ten millimetres) | 36 | Each | |
| 52 | 47 | Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 53 | 47.01 | a) 125 mm (one hundred twenty five millimetres) | 114 | Each | |
| 54 | 47.02 | a) 100 mm (one hundred millimetres) | 420 | Each | |
| 55 | 48 | Providing and fixing M.S. hooks and eyes with necessary screws etcetera complete 150 mm (one hundred fifty millimetre) size as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 246 | Each | |
| 56 | 49 | Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or mortise lock with six levers including necessary screws etcetera complete (Indian make of approved quality) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 12 | Each | |
| 57 | 50 | Providing and fixing magnetic catcher in cup board shutters with necessary screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 60 | Each | |
| 58 | 51 | Providing and laying 1st quality matt finish ceramic tiles of 5.5mm (Five point five Millimetres) thick 40x40 cm (forty into forty centimetres) size of SOMANY and of approved shade and sample in flooring treads of steps laid on a bed of 12mm (Twelve Millimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing with white cement as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 38.3 | Per square metre | |
| 59 | 52 | Providing and laying automatic vibro hydraulically compressed 300x300x25mm(Three hundred into Three hundred into Twenty five millimetres) polished terrazzo tiles ISI marked No. 1237 of NTC or its equivalent in 70% (Seventy percent) white cement : 30% (Thirty percent) grey cement ratio. The ratio of chips shall be 55% (Fifty five percent) white and 15% (Fifteen percent) each maroon ,yellow and dark green shade having chips size of 0, B, 2B marble chips of specified size laid in floors, treads of steps and landings on a bed of 25 mm (Twenty five millimetres) average thickness of cement mortar 1:6 (One cement is to Six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of Silver grey shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1319.3 | Per square metre | |
| 60 | 53 | Providing and laying automatic vibro hydraulically compressed 250x250x20mm(Two hundred fifty into Two hundred fifty into Twenty millimetres) polished terrazzo tiles ISI marked No. 1237 of NTC or its equivalent in 70% (Seventy percent) white cement : 30% (Thirty percent) grey cement ratio. The ratio of chips shall be 55% (Fifty five percent) white and 15% (Fifteen percent) each maroon, yellow and dark green shade having chips size of 0, B, 2B marble chips of specified size laid in skirting and risers of steps up to any heights on 10mm (Ten millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing , nosing and polishing complete with tiles of Silver Grey shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government | 123.47 | Per square metre | |
| 61 | 54 | 40mm (Forty millimetres) thick cement concrete flooring 1:2:4(One cement: Two sand : Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) laid in one layer finished with a floating coat of neat cement as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 29 | Per Square Metre | |
| 62 | 55 | Providing and fixing 2mm (Two millimetres) thick heavy duty homogeneous vinyl flooring ISI marked No. 3462/1982 of wonder floor colored carbed or mosaic/matted finish laid with approved adhesive on sub floor (Damp Proof treatment to be paid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 29 | Per Square Metre | |
| 63 | 56 | White glazed tiles 6mm (Six millimetres) thick in skirting of IS quality 30x20cm (Thirty into Twenty centimetres) of NITCO/Somany tiles or its equivalent in risers of steps and dado laid on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry above plinth level to all floor level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 344.43 | Per Square Metre | |
| 64 | 57 | Painting two coats with high glossy 3D epoxy resin paint for interior wall painting with epoxy paint roller brusher plain, smooth finish composed of acrylic polymer in emulsion inorganic /special pigment siliceous aggregate antifungicides anti-rusting & foaming in two coats including necessary putty to give smooth even surface ,papering smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 60.35 | Per Square Metre | |
| 65 | 58 | Providing and laying 20mm ( Twenty millimetre) thick white marble with grey streaks having semi round nosing and molding (Table rubbed and polished ) in flooring laid over 20 mm(Twenty millimetre) thick base in cement mortar 1:3 (one cement: three sand ) including jointing with cement mortar 1:2(one white cement: Two Marble dust) with an mixture of pigment to match the shade of the marble complete upto all floor levels as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 16.05 | Per Square metre | |
| 66 | 59 | Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick pre-painted Tata / Shakti sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5(five micron) primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameters with pre-painted limpet and rubber washers complete with all accessories as required as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 842.78 | Per square metre | |
| 67 | 60 | Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Six zero millimetres) thick pre-painted Tata / Shakti sheet steel ( Factory made) shall be having proper Gola / shape with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameters with pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 130.65 | Per running metre | |
| 68 | 61 | Providing and fixing valleys 90cm (Ninety centimetres) over all with 0.60mm (Zero decimal Six zero millimetres) thick pre-painted steel sheet of Tata / Shakti in valleys with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with pre-painted G.I. limpet and bitumen washers complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 40.16 | Per running metre | |
| 69 | 62 | Providing and fixing M.S. ( Mild Steel) B.P. sheet 2.00 mm (two millimetre) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and laid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 128.28 | Per square metre | |
| 70 | 63 | Providing and fixing 30cm. (Thirty centimetre) wide 30cm.(Thirty centimetre) deep plain G.I. Sheet of Tata / Shakti 0.60mm (Zero decimal six zero) millimetre thick gutter with iron brackets 40x3mm (Forty into three millimetre) size, bolts nuts and washers etc. including dome shape gratins and making necessary connections with rain water pipe complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 144.52 | Per Running metre. | |
| 71 | 64 | Providing and fixing 75mm (Seventy five milimtres) diameters on wall face P.V.C. (D-plast) rain water pipes 2.2mm ( Two decimal Two millimetre) thick of supreme working pressure not less than 4.50 kgs(Four decimal five zero kilograms) per square centimetre including filling the joints with approved adhesive complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 109.5 | Per Running metre. | |
| 72 | 65 | Providing and fixing on wall face P.V.C. (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 73 | 65.01 | PVC plain bend 75 mm (Seventy five millimetre) dia 2.2mm ( Two decimal two millimetre ) thick | 20 | Each | |
| 74 | 65.02 | PVC plain Shoe 75 mm (Seventy five millimetre) dia 2.2mm ( Two decimal two millimetre ) thick | 10 | Each | |
| 75 | 66 | Providing and fixing 75mm (Seventy five millimetre) diametre M. S. holder bat clamps of approved design to PVC pipes embedded in cement concrete block 10cmx10cmx10cm (Ten centimetre into Ten centimetre into Ten centimetre) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size and including cost of cutting holes and making good the wall etcetera as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 60 | Each | |
| 76 | 67 | Steel work welded in built up sections trusses and framed work in trusses and trussed purlins of Tata / Sail in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 181.38 | Per quintal | |
| 77 | 68 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint other than white as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 426.7 | Per square metre | |
| 78 | 69 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint brushing wood pink primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 431.44 | Per square metre | |
| 79 | 70 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed enamel paint brushing to give an even shade including cleaning the surface of dirt, dust and other foreign mattress, sand papering and Knotting with enamel paint other than white complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 431.44 | Per square metre | |
| 80 | 71 | 6mm (Six millimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1384.98 | Per square metre | |
| 81 | 72 | 15 mm (Fifteen millimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1868.83 | Per Square- metre. | |
| 82 | 73 | 15 mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1868.83 | Per Square- metre. | |
| 83 | 74 | 15 mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to floor two levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (one cement is to five sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1423.24 | Per Square- metre. | |
| 84 | 75 | 15 mm (Fifteen millimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (One cement is to three sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 51 | Per Square- metre. | |
| 85 | 76 | Finishing wall with weather proof exterior grade emulsion of approved shade (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etcetera including sand papering smooth complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1423.24 | Per square metre | |
| 86 | 77 | Providing and laying Dr. fixit torch shield (P-3160-3mm) shall be used for water proofing treatment Dr. fixit torch shield memberance are made from high grade bitumen & selector polymers. The APP/SBS Modified bitumen is then coated to non woven holster reinforcement to give high tear & puncture resistance. The application shall be done as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 105 | Per square metre | |
| 87 | 78 | Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on un-decorated wall surfaces to give an even shade over and including priming coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matters including preparing the surface even and sand papered smooth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 394.56 | Per square metre | |
| 88 | 79 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3218.46 | Per Square metre | |
| 89 | 80 | Distempering (Two coats) with 1st quality oil bound washable distemper of Asian paints and manufacture and of required shade on ceiling / sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and also including preparing the surface even and sand papered smooth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1384.98 | Per square metre | |
| 90 | 81 | Distempering (two coats) with oil bound washable distemper of Asian paints and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matters and also including preparing the surface even and sand papered smooth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1868.84 | Per Square- metre. | |
| 91 | 82 | Wall painting two coats with 1st quality synthetic enamel paint of Asian paints and manufacture for interior grade on un-decorated concrete/ stone /plastered wall surfaces to give an even shade including thoroughly brushing the surfaces free from mortar droppings and other foreign matters and sand papered smooth including applying of putty as required for matting the surfaces as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1868.84 | Per Square- metre. | |
| 92 | 83 | Providing and fixing railing for stair case having baluster of 19x19mm (Nineteen into nineteen millimetre) M.S. ( Mild Steel) solid square bar with clear height of 85cm (eighty five centimetre) at a rate of 30cm (thirty centimetre) center to center fixed in cement concrete steps and jointed / welded with electric/gas welding at top alongwith hand rails of teak wood of size 6.25 x 7.50 cm (Six decimal two five into seven decimal five zero centimetres). Vertical balusters should be welded/jointed each other with 2 numbers M.S flat of 37.5 x 5mm (thirty seven decimal five into five millimetre) complete including a priming coat of red lead paint as per specifications approved drawing, design and as per direction of Engineer-In-Charge including entire carriage of material within al leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 46.11 | Per Square- metre. | |
| 93 | 84 | Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone aggregate 40mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 93.76 | Per Square Metre | |
| 94 | 85 | Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement is to three sand is to six graded stone aggregate 20mm(twenty millimetre) nominal size) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 93.76 | Per Square Metre | |
| 95 | 86 | Construction of cement concrete covered drain in cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) nominal size including shuttering and earth work and cast in situ reinforced cement concrete slab over drain and cement concrete flooring 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size and finished with a floating coat of neat cement complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 141.22 | Per Running metre | |
| 96 | 87 | Providing and fixing 600 x 450 mm (Six Hundred into four hundred five millimetres) light duty C.I. Manhole cover with frame. The weight of cover with frame shall be 38 Kg (Thirty eight Kilogram) weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) (single seal) as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3 | Each | |
| 97 | 88 | Providing and fixing chromium plated 40mm (forty millimetres) diameter steel pipe grab bars at 78cm (seventy eight centimetres) height with M.S. plate as per the position of seat and wash basin in toilet for disabled persons complete in all respect as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 6 | Each | |
| 98 | 89 | Providing and fixing IS marked CERA in white colour vitreous china water closet squatting pan (Indian type W.C. pan) No 2071 size 580x400mm (Five hundred eighty into four hundred millimetres) Orissa pattern (earth work, bed concrete, foot rest and trap to be measured and paid for separately) snow white shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 12 | Each | |
| 99 | 90 | Providing and fixing vitreous china wash down water closet (Anglo Indian Type W.C. Pan) No. 2061 universal WC of CERA in snow white shade with integral P or S trap including jointing the trap and soil pipe with approved adhesive (seat and cover to be measured and paid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3 | Each | |
| 100 | 91 | Providing and fixing PVC 100mm ( One hundred millimetre) P or S trap for water closet (squatting Pan) including jointing the trap with the Pan and soil pipe with approved adhesive as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 12 | Each | |
| 101 | 92 | Providing and fixing 10 ltr. (Ten Litres) P.V.C. low level flushing cistern No. 502 ISI marked 7231 of prayag in white shade of CERA with a pair of C.I. or M.S. brackets complete with fitting such as lead valve less syphon Dual flushing system 15mm ( fifteen millimetre) nominal size brass ball valve with polythene float C.P. brass handles Unions and couplings for connection with inlet outlet and over flow pipes 40mm (Forty millimetre) diameters C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 15 | Each | |
| 102 | 93 | Providing and fixing ISI mark No 1025 of CERA in white shade flat back 550x400 (Five hundred fifty into four hundred millimetres) vitreous china wash basin white shade with double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17 | Each | |
| 103 | 94 | Providing and fixing vitreous china bowl pattern flat back large urinal No- 5001 size of 63.3 x 39.5 x 42.0 cm (Sixty three decimal three into thirty nine decimal five into forty two decimal zero centimetres) of CERA including connection with urinal and waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 6 | Each | |
| 104 | 95 | Providing and fixing 5 ltr. ( Five litres) auto flush P.V.C. cistern of Prayag / Cera for urinal fitted with a pair of C.I. or M.S. brackets and fitting such as lead valve less syphon 15mm ( fifteen millimetre) nominal size brass ball valve with polythene float, hus button couplings for connection with inlet outlet and over flow pipes 40mm (Forty millimetre) diameters C.P. (chromium plated) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 6 | Each | |
| 105 | 96 | Providing and fixing 600mm x330mm (Six hundred into three hundred thirty millimetre) vitreous china division plate of Cera for urinals complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 4 | Each | |
| 106 | 97 | Providing and fixing stainless steel kitchen sink 460mm X 560mm X 220mm ( four hundred sixty millimetre into five hundred sixty millimetre into two hundred twenty millimetre) ISI No.1022-XD of Prayag polymers / cera of approved make with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fittings as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 4 | Each | |
| 107 | 98 | Providing and fixing 32mm (thirty two millimetre) dia CP brass waste ISI marked I.S. No. 8934 of Jal for wash basin or sink as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 21 | Each | |
| 108 | 99 | Providing and fixing 32mm (thirty two millimetre) dia rubber plug for wash basin or Sink complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 21 | Each | |
| 109 | 100 | Providing and fixing M.I. Union for wash basin or sink 32mm (thirty two millimetre) dia as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 21 | Each | |
| 110 | 101 | Providing and fixing 32mm (Thirty two millimetres) diameters P.V.C. waste pipe for wash basin or sink including brass check nut complete, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 21 | Each | |
| 111 | 102 | Providing and fixing 100mm (one hundred millimetre) C.P. iron gratting ISI marked IS No-8934 of Jal for nahani trap as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 22 | Each | |
| 112 | 103 | Providing and fixing chromium plated jet spray of ISI Marked IS No. 8934 of Jal of approved quality and colour with one metre tube as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3 | Each | |
| 113 | 104 | Providing and fixing 600mmx450mm (Six hundred millimetre into Four hundred fifty millimetre) beveled edge mirror of superior glass of ISI Marked IS No. 8934 of Jal mounted on 6mm (Six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers etcetera. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17 | Each | |
| 114 | 105 | Providing and fixing 750mmx20mm (Seven hundred fifty millimetre into twenty millimetre) C.P. brass Towel rail of ISI Marked IS No. 8934 of Jal complete with C.P. brass brackets and guard rail fixed to wooden plugs with C.P. screws etcetera as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 9 | Each | |
| 115 | 106 | Providing and fixing 600mm X 120mm (six hundred millimetre into one hundred twenty millimetre) glass shelf of Jal/ Jaguar with C.P. brass bracket and guard rail complete fixed to wooden plugs with C.P. screws etcetera complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17 | Each | |
| 116 | 107 | Providing and fixing chromium plated brass soap dish ISI Marked IS No. 8934 of Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17 | Each | |
| 117 | 108 | Providing and fixing 15mm dia (fifteen millimetres) diametres C.P. (chromium plated) brass ISI Marked IS No. 8934 of Jal bib tap (superior or heavy type) with capstan head as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 39 | Each | |
| 118 | 109 | Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass stop cock ISI Marked IS No. 8934 of Jal as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 38 | Each | |
| 119 | 110 | Providing and fixing C.P. Brass Pillar tap with Capstan head ISI Marked IS No. 8934 of Jal 15mm ( fifteen millimetre) diameter as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 17 | Each | |
| 120 | 111 | Providing and fixing P.V.C. connection pipe with brass unions 45cm (forty five centimetre) length and 15mm (fifteen millimetre) diameter of Jal as per specifications the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government. | 50 | Each | |
| 121 | 112 | Providing and fixing PVC water storage tank of syntax (marked triple layer) 1000 ( One thousand) Liters net capacity with 40mm (forty millimetre) nominal size bore galvanized mild steel scour tube 25mm (twenty five millimetre) nominal bore galvanized mild steel over flow pipe, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level complete in all respect as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 5 | Each. | |
| 122 | 113 | Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre)nominal bore. ISI Marked IS No. 8934 of Jal as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 5 | Each | |
| 123 | 114 | Providing and fixing 15mm (Fifteen millimetre) nominal bore brass ball valve ISI Marked IS No. 8934 of Jal (Horizontal plunger type) high pressure with plastic floats as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 5 | Each | |
| 124 | 115 | Providing and fixing polyethylene aluminum polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilized with carbon black conforming to IS 15450-2004 of kitec for water supply i/c clamps at one metre spacing, cutting, fixing and making good the walls etcetera but excluding the cost of fitting( internal work) pipes exposed on walls 1216 (16 mm O.D.) pipe (one thousand two hundred sixteen) sixteen millimetre outer diameter as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 220 | Rmt. | |
| 125 | 116 | Providing and laying in trenches galvanized mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 20 mm (twenty millimetre) nominal bore as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 365 | Rmt. | |
| 126 | 117 | Providing and fixing composite end seal compression fittings as per 15450-2004 for cold water supply e.g. ( for example) Tees, Elbows, Reducers, Thread, Socket connector, couplers and clamps etcetera of Kitec with jointing testing and fitting complete including cutting and making good the walls complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 127 | 117.01 | Equal Tees (1216) of Kitec | 40 | Each | |
| 128 | 117.02 | Female branch Tee 1216 x 1216x15 mm (one thousand two hundred sixteen into one thousand two hundred sixteen fifteen millimetre) thread of Kitec | 40 | Each | |
| 129 | 117.03 | Female Elbow 1216 x 15 mm (one thousand two hundred sixteen into fifteen millimetre) thread of Kitec | 50 | Each | |
| 130 | 117.04 | Male thread connector 1216 x 15 mm (one thousand two hundred sixteen into fifteen millimetre) thread of Kitec | 10 | Each | |
| 131 | 117.05 | coupler 1216 (one thousand two hundred sixteen millimetre) of Kitec | 10 | Each | |
| 132 | 118 | Providing and fixing high pressure PVC Diplast spigot and socket, waste and ventilating pipe Class \"A\" of supreme conforming to I.S. No. 13592- fixing with approved adhesive etcetera complete .as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 133 | 118.01 | 75 mm (Seventy five millimetres) nominal bore/diametre 2.2mm ( Two decimal two millimetre) thick | 135 | Per running metre | |
| 134 | 118.02 | 110 mm (One hundred ten millimetres) nominal bore/diametre 2.7mm ( Two decimal Seven millimetre) thick | 134 | Per running metre | |
| 135 | 119 | Providing and fixing PVC Clamp ISI marked of approved design with steel screws and rowel plugs etcetera complete as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 136 | 119.01 | 75mm (Seventy five millimetres) nominal bore/diametre | 100 | Each | |
| 137 | 119.02 | 110 mm (One hundred ten millimetres) nominal bore/diametre | 100 | Each | |
| 138 | 120 | Providing and fixing PVC plain bend ISI marked of Supreme conforming to IS. No. 14735-99 of including fixing with approved adhesive etc. complete. The rate is inclusive for carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, Malkana, toll tax, sales tax GST or any other taxes imposed by the Government . | |||
| 139 | 120.01 | 75 mm (Seventy five millimetres) nominal bore/diameter | 13 | Each | |
| 140 | 120.02 | 110 mm (One hundred ten millimetres) nominal bore/diameter | 12 | Each | |
| 141 | 121 | Providing and fixing PVC single equal branch of Supreme plain ISI marked conforming to IS. No. 14735-99 including fixing with approved adhesive complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 142 | 121.01 | 75 mm (Seventy five millimetres) nominal bore/diameter | 5 | Each | |
| 143 | 121.02 | 110 mm (One hundred ten millimetres) nominal bore/diameter | 5 | Each | |
| 144 | 122 | Providing and fixing PVC plain fitting accessories double equal branch ISI marked including fixing with approved adhesive etcetera complete as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 145 | 122.01 | 75 mm (Seventy five millimetres) nominal bore/diameter | 20 | Each | |
| 146 | 122.02 | 110 mm (One hundred ten millimetres) nominal bore/diameter | 20 | Each | |
| 147 | 123 | Providing and fixing 110 mm (One hundred ten millimetre) diametre size Single unequal branch of required degree with heal rest bend of PVC including fitting and accessories of Supreme conforming to I.S 14735-99 and fixing with approved adhesive complete as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 5 | Each | |
| 148 | 124 | Providing and fixing C.I. Collar of Supreme ISI marked I.S. No. 14735-99 including fixing with approved adhesive etcetera complete as per H.P.P.W.D specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 149 | 124.01 | 75 mm (Seventy five millimetres) nominal bore/diameter | 75 | Each | |
| 150 | 124.02 | 110 mm (One hundred ten millimetres) nominal bore/diameter | 75 | Each | |
| 151 | 125 | Providing and fixing P.V.C Cowl of Supreme ISI marked conforming to I.S 14735-99 including fixing with approved adhesive etcetera complete. As per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | |||
| 152 | 125.01 | 75 mm (Seventy five millimetres) nominal bore/diameter | 4 | Each | |
| 153 | 125.02 | 110 mm (One hundred ten millimetres) nominal bore/diameter | 4 | Each | |
| 154 | 126 | Providing and fixing 110 x 90 mm (One hundred ten into ninety millimetres) nominal size/diameter PVC floor trap of Supreme ISI marked conforming to I.S No. 14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 22 | Each | |
| 155 | 127 | Construction of manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetres) nominal size inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (Eight hundred into Eight hundred millimetres) and 500mm (Five hundred millimetres) deep, including C.I. (Cast iron) cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal dimensions total weight of cover and frame to be 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building brick in cement mortar 1:3 (one cement: three sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 12 | Each | |
| 156 | 128 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand C.I. cover with frame (light duty) 355x610mm (Three hundred fifty five into six hundred ten millimetre) internal dimensions. Total weight of cover and frame to be 38 kgs (thirty eight kilogram) weight of cover 23kgs (twenty three kilogram) and weight of frame 15 kgs (fifteen kilogram). RCC top slab with 1:2:4 ( one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimetre) foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded crushed /broken stone aggregate 40mm (forty millimetre) nominal size inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement on walls and bed concrete etcetera complete inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millimetre) and 450mm (Four hundred fifty millimetre) deep single pipe line complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 22 | Each | |
| 157 | 129 | Excavation in drains and channels etcetera in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting de-watering and pumping or bailing out water (surface and sub soil water) up to any depth or any qantum of water including slush which may arise during de-watering or removal of slush, lift up to any heights, stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per H.P.P.W.D specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 50.65 | Per Cubic Metre | |
| 158 | 130 | Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5 (one ement is to five sand) and water tight C.I. cover with frame of 300mmx 300mm (Three hundred millimetre into three hundred millimetre) size (inside) the weight of cover to be not less than 4.53 kg (four decimal fifty three kilogramm) and frame to be not less than 3.72 kg (three decimal seven two kilogram) square, Mouth traps 150mmx100mm ( One hundred fifty millimetre into One hundred millimetre) size P or R type. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 76 | Each | |
| 159 | 131 | Providing and laying cement concrete 1:5:10(One cement: five sand: ten graded crushed stone aggregate 40mm (Forty Millimetres) nominal; size for bedding for 110 mm (one hundred andten Millimetres) diameters P.V.C. pipe including necessary form work and curing complete, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 191 | Per running metre | |
| 160 | 132 | Providing and laying 110mm (One hundred ten milimtres) diameters P.V.C. (D-plast) sewer pipe of Supreme conforming to I.S. No. 13592-92 4.6 mm thick of working pressure not less than 4.50 kg/cm2(Four decimal five zero kilograms) per square centimetre including filling the joints with approved adhesive complete and as directed by the Engineer- in-charge within all leads, lifts of materials and other incidentals. | 211 | Per running metre | |
| 161 | 133 | Providing and fixing C.P. brass toilet paper holder ISI marked IS No. 8934 of Jal as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3 | Each | |
| 162 | 134 | Providing and fixing plastic seat (Solid type) and cover of CERA for wash down water closet with C.P. brass hinges and rubber buffers solid type ( white plastic seat and cover) complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 3 | Each | |
| 163 | 135 | Providing and fixing 1.00 HP (One Horse power) Tulu pump including board and fittings complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 1 | Each | |
| 164 | 136 | Providing and fixing 15mm (Fifteen millimetre nominal diametre) to wall ceiling and floor galvanized mild steel tube ( medium grade ) ISI marked to be fixed with clamps including making good the walls, ceiling and floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. | 100 | Per Running- metere, |
AI Tender Summary
Tender Timeline
Oct 01, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender