Maintenance Of Uit Office Building Kota Civil Work
Tender Value
14.34 Lakhs
Estimated cost
Bid Submission
10 Oct 2019
0 days left
EMD
28680
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Uit Office Building Kota Civil Work
BOQ
| Name of work :- Maintenance of UIT Office Building, Kota | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtr. All kinds of soil. | 2 | Cum | |
| 2 | 2 | Providing and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment [TCGT] in ratio 1 : 2 as per manufacturers specification for POST CONSTRUCTIONAL Anti-termite treatment (as per IS 6313) part-III 1971 as amended from time to time). Along external wall where apron is not provided using Chemical emulsion @ 7.5 litre / Sqm of the vertical surface of the sub structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete. With chlorpyriphos / Lindane E.C. 20% with 1% concentration. | 100 | Rmt | |
| 3 | 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) | 10 | Cum | |
| 4 | 4 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | 5 | Cum | |
| 5 | 5 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | 10 | Cum | |
| 6 | 6 | Reinforced cement concrete work in beams, suspended floors, roofs, griders having slopes up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement : with 1 : 1 : 2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). | 5 | Cum | |
| 7 | 7 | Add extra for RCC work in superstructure above floor three level for each subsequent floor level or part there of for item No. 4.2 to 4.7. | 5 | Cum | |
| 8 | 8 | Centering & shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for superstructure upto 4.5 m height above plinth, for : Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chajjas, lintel, beam etc. | 10 | Sqm | |
| 9 | 9 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Cold twisted deformed bars (IS : 1786). | 250 | Kg | |
| 10 | 10 | Brick masonry in foundation and plinth with bricks of class designation 75 in :Cement mortar 1 : 4 (1 cement : 4 coarse sand). | 10 | Cum | |
| 11 | 11 | Add extra over item No. 5.1 for brick work in super structure upto third storey. | 10 | Cum | |
| 12 | 12 | Half brick masonry in foundation & plinth using bricks of designation 75 in : Cement mortar 1 : 4 (1 cement : 4 coarse sand). | 25 | Sqm | |
| 13 | 13 | Add extra over item No. 5.8 for half brick masonry in super structure upto third storey. | 25 | Sqm | |
| 14 | 14 | Supplying and fixing stone lintels / bed plates of approved quarry rough dressed in cement mortar 1 : 4 : Upto 15 cm. thick. | 1 | Cum | |
| 15 | 15 | Providing and fixing 1st quality standard White / Ivory Glazed Tiles ISI marked [IS : 13753] of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar).Catgory-I : Kajaria, Johnson, , Somani make etc. | 50 | Sqm | |
| 16 | 16 | Providing & fixing vitrified paving tiles size 600 mm × 600 mm × 12 mm thick fix with cement mortar over 20 mm thich (1 Cement 4 Sand) laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortor 1:4)Category -A : Kajaria, Jhonson, Somani make | 50 | Sqm | |
| 17 | 17 | Providing and Fixing mortice \nlock of : Harrison make with CP steel handles. | 5 | Nos | |
| 18 | 18 | Brick masonry in Super structure upto third story with bricks of class designation 75 in : Cement mortar 1 : 4 (1 cement : 4 coarse sand). | 5 | Cum | |
| 19 | 19 | Half Brick masonry in Super structure upto third story using bricks of class designation 75 in : Cement mortar 1 : 4 (1 cement : 4 coarse sand). | 25 | Sqm | |
| 20 | 20 | Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm. thick wall in : Cement Mortar 1 : 6 (1-Cement : 6-Sand). | 10 | Cum | |
| 21 | 21 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement Mortar 1 : 6 (1-Cement : 6-Sand). | 5 | Sqm | |
| 22 | 22 | Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges : Kota Stone 25 to 30mm thick. | 5 | Sqm | |
| 23 | 23 | P/F I st quality MAT finished Ceramic Tiles 300 x 300 mm conforming to IS:13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Unitile of Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). Category-A Kajaria, Johnson, Somani | 20 | Sqm | |
| 24 | 24 | Providing and fixing superior quality like Hardvyn or equilent hydraulic door closure. | 5 | Nos. | |
| 25 | 25 | Providing and Fixing Bearing Base door closure. | 1 | Nos. | |
| 26 | 26 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. | 200 | Kg. | |
| 27 | 27 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance. | 25 | Sqm | |
| 28 | 28 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | 5 | Kg. | |
| 29 | 29 | P. & F. Chequerred plain cement concrete embossed to specially manufactured non-slipping tiles of approved make 20mm thick, laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. | 15 | Sqm | |
| 30 | 30 | Plaster on new surface of walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish : 20mm thick | 150 | Sqm | |
| 31 | 31 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : (a) Old work (One or more coats). | 500 | Sqm | |
| 32 | 32 | Painting with enamel paint of approved brand and manufacture to give an even shade : (a) One or more coats on old work | 500 | Sqm | |
| 33 | 33 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work. | 500 | Sqm | |
| 34 | 34 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. | 120 | Sqm | |
| 35 | 35 | Applying priming coat: with ready mix Zinc chromate Yellow primer of approved brand and manufacture on steel galvanized Iron/Steel wire. | 35 | Sqm | |
| 36 | 36 | Painting with Acrylic Exterior Paint Birla/ Nerolac/ Asian/ Berger of approved brand to give an even shade with all scaffolding, two or more coat on new work after cleaning of existing surface complete in all respect. As per direction of Engineer in charge. | 5500 | Sqm | |
| 37 | 37 | Making Opening in masonry wall including dismantling, fixing lintel / beam and making good the damages to wall and floor complete to match the existing surface including proping the existing structure above the opening excluding cost of lintel / beam etc. | 2 | Sqm | |
| 38 | 38 | Renewing glass panes, with putty and nails wherver necessary : 5.5mm thick plain glass pains. | 10 | Sqm | |
| 39 | 39 | Demolishing cement concrete including disposal of material within 50 mtr. lead : 1:3:6 or richer mix. | 10 | Cum | |
| 40 | 40 | Demolishing brick work including stacking of servicable material and disposal of unservicable material within 50 Mtr. Lead in cement mortar. | 10 | Cum | |
| 41 | 41 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 mtr. leads. In cement mortar | 2 | Cum | |
| 42 | 42 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : of area 3 square meter and below. | 10 | Nos. | |
| 43 | 43 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead : For thickness of tiles 10 mm to 25 mm. | 150 | Sqm | |
| 44 | 44 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. | 50 | Sqm | |
| 45 | 45 | Dismantling of flooring with care including stacking of servicable material and disposal of unservicable material within 50 Mtr. Lead for : cmeent concrete flooring. | 100 | Sqm | |
| 46 | 46 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35 x 35 x 5 mm suitabilly diagonally braced with 25 x 3 mm flat iron above and below lock rail of size 50 x 5 mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats : including two coats of anit-corrasite red oxide primer paint. M.S. Sheet 20 S.W.G. | 10 | Sqm | |
| 47 | 47 | Providing corrugated G.I. Sheet roofing fixed with G.I.J. or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. Limpet washers or with G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60°) & excluding the cost of purlins rafters and truses, for class of sheets : 0.80 mm thick | 10 | Sqm | |
| 48 | 48 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Birla/J.K./Nerolac or ISO. As per direction of Engineer in charge. | 200 | Sqm | |
| 49 | 49 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC / neoprene felt etc.; Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately). Fixed portion. | 25 | Kg. | |
| 50 | 50 | For shutters of doors, windows & ventilators including providing and fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). | 10 | Kg. | |
| 51 | 51 | Providing and fixing 12 mm thick pre laminated three layer medium density (exterior grade) particle board Grade I, Type-II confirming to IS : 12823 bonded formaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 5 | Sqm | |
| 52 | 52 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item). With glass panes of 4.0 mm thickness (weight not less than 10.0 kg./sqm) as per IS : 2835. | 50 | Sqm | |
| 53 | 53 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 including cost of cutting floors as required, embedding in floors and cover plate etc. complete as per direction of Engineer-in-charge. | 5 | Nos. | |
| 54 | 54 | Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001 to 5000 Sq.Cm : 30 mm thick slab. | 15 | Sqm | |
| 55 | 55 | P & F external grade board solid core single leaf flush door shutters IS: 2202-67 marked using Phenol formaldehyde resin in glue both sides with approved steel fittings complete, as per annexure 'A' : Decorative teak veneer one side(a) 30mm thick | 6 | Sqm | |
| 56 | 56 | Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with: Stone slab 40 to 50mm thick average. | 10 | Sqm | |
| 57 | 57 | Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges : 75mm thick. | 2 | Sqm | |
| 58 | 58 | Dismantling cement, asbestos, celotex or other hard board ceiling or partition walls including stacking of serviceable material and disposal of unserviceable material within 50 meter lead. | 13 | Sqm | |
| 59 | 59 | Applying one coat of primer of approved brand and manufacture on wall surface including all scaffolding, (new surface) : Cement primer (on new surface). | 100 | Sqm | |
| 60 | 60 | Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water-proof compound) excluding two coats of hot blown bitumen (2 kg per sqm) complete as per specification without glass strip 3mm thick at a distance of 1m interval. 50mm thick | 50 | Sqm | |
| 61 | 61 | Supply & stacking good earth at site complete including loading, unloading & transportation etc. | 15 | Cum | |
| 62 | 62 | Spreading of manure and good earth in required thickness (Cost of manure and good earth to be paid separately) | 15 | Cum | |
| 63 | 63 | Providing and fixing of precast concrete interlocking blocks of 80 mm thick (M-30 Grade) manufactured from fully computerized automatic stationery hydraulic vibro peressed machine & full computerized automatic batching plant of class A-1 as per BS :6717-2001.the CC interlocking paving blocks be laid on average 50 mm thick bed of coarse sand and the joint is to be filled with fine sand.Laying procedure on compected sub base as defined. the work includes earth work in cutting of B/T road , cutting of WBM road and disposal of unserviceable Material with all leads & lifts and stacking of serviceable material complete . job is to be executed as per the instructions of Engineer -in- charge.The rates to be inclusive of all lead ,lifts & taxes General information of Blocks:1.Shape: As specified by Engineer-in-charge 2. Tensile splitting strength and breaking load as per BS 6717-2001. 3.Colour : Grey cement natural colour. 4. Variation in dimension :less than 1.6 mm. 5.Variation in thickness :Less than 3.2 mm. | 10 | Sqm | |
| 64 | 64 | Providing and Fixing superior quality like Hardvyn or equivalent hydraulic door closure. | 10 | Nos. | |
| 65 | 65 | Providing and fixing welded mesh / expanded metal mesh in frame work, flat iron beading 20 x 3 mm including top cross laps inside and out sides welding, iron bolts, screws, clips etc. complete (excluding frame work) of size.Expanded metal size 20 to 25 mm size 18 SWG. | 25 | Sqm | |
| 66 | 66 | Providing corrugated G.I. Sheet roofing fixed with G.I.J. or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. Limpet washers or with G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60°) & excluding the cost of purlins rafters and truses, for class of sheets : 0.80 mm thick | 5 | Sqm | |
| 67 | 67 | Providing and fixing Indian Type white glazed vitreous china 1st quality W.C. Orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 530 x 410mm | 5 | Nos. | |
| 68 | 68 | P. & F. 1st quality WVC Urinals (IS: 2556 mark) with 25mm dia GI waste pipe, dome couplings, concealed iron brackets or screws etc complete. Flat back(large) or Half stall size 440x265x315 mm | 5 | Nos. | |
| 69 | 69 | P&F low level flushing cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings, C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS:7231 | 4 | Nos. | |
| 70 | 70 | Providing and fixing waste pipe with all fittings. GI (B-class) 40mm. | 5 | Nos. | |
| 71 | 71 | P. & F. C.P. brass Grating of approved quality/make. Stainless Steel Sheet Size 125 mm dia. size 125mm dia. | 5 | Nos. | |
| 72 | 72 | Providing and fixing Pillar Cocks (IS : 8934 Mark) of superior quality and approved make.C.P. Pillar cock, 15 mm dia nominal bore | 2 | Nos. | |
| 73 | 73 | P & F bib cock (IS: 8931 mark) superior quality of approved makeC.P. Brass bib cock, 15 mm nominal bore | 3 | Nos. | |
| 74 | 74 | Providing and fixing Push Cock, superior quality, of approved make. C.P. Brass 15 mm | 3 | Nos. | |
| 75 | 75 | P&F Ball cock (IS:1703 mark) with rod & PVC ball complete : Brass wt. 400gm 15mm | 3 | Nos. | |
| 76 | 76 | P&F inlet connection (Angle, Valves) superior quality, of approved make for washbasin Gyser etc. C.P. inlet connection 15mm brass (IS:8931 marked) | 10 | Nos. | |
| 77 | 77 | P&F 15mm dia connection pipe of approved quality/make : PVC Pipe with C.P. Brass nuts upto length 300 mm | 10 | Nos. | |
| 78 | 78 | P&F full-way valve (IS:778 mark) or wheel valve of approved make : Gun metal 15mm nominal bore | 10 | Each | |
| 79 | 79 | Gun metal 20mm nominal bore | 3 | Each | |
| 80 | 80 | P&F rigid PVC pipe [IS:4985 mark] class-II [4 kg/cm2] approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant : 110mm dia | 20 | Rmt | |
| 81 | 81 | Construction of Chamber in all types of soil with 300 mm thick masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in Cm 1 : 6, finished with floating neat cement 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr.Inside size 300 x 300 mm & depth upto 0.5 M & 5 Kg CI cover with frame | 2 | Nos. | |
| 82 | 82 | Inside size 450 x 450 mm & depth upto 0.5 M & 5 Kg CI cover with frame | 1 | Nos. | |
| 83 | 83 | Construciton of cement concrete chamber with 125mm dia C.P. brass grating. | 15 | Nos. | |
| 84 | 84 | P&F PVC storage tank conforming to IS : (12701 marked indicating the BIS License No.) of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25cm long wash out pipe with plug & socket, including making connection etc. complete of approved design.\n500 ltr. Capacity | 5 | Nos. | |
| 85 | 85 | 1000 ltr. Capacity | 5 | Nos. | |
| 86 | 86 | P&F stop cock (IS:8931 mark) superior quality & of approved make : Brass 400 gm, 15 mm nominal bore | 5 | Nos. | |
| 87 | 87 | Providing and fixing CP brass Urinal Spreader for stall urinal of approved make | 5 | Nos. | |
| 88 | 88 | Providing and fixing Waste Coupling with fittings of approved quality / make. C.P. Brass 32 mm dia | 5 | Nos. | |
| 89 | 89 | Providing and fixing Waste Pipe with all fittings. P.V.C. with P.V.C. nut 32 mm | 5 | Nos. | |
| 90 | 90 | Providing and fixing European type white glazed vitreous china 1st quality Double syponic W.C. (IS : 2556 Mark) P or S Trap including cutting and making good the wall and floor. | 1 | Nos. | |
| 91 | 91 | Labour Charges for removing W.C. Pan (any type) of all sizes with care including all necessary fittings P or S Trap. | 4 | Nos. | |
| 92 | 92 | Providing and fixing W.V.C. (IS : 2556 Mark) Squatting Urinal of standard make complete including cutting & making good the floor. Size 450x350mm | 5 | Nos. | |
| 93 | 93 | P&F rigid PVC pipe fitting (IS:4985 mark) of approved quality/mark including jointing the fitting with solvent cement rubber ring and lubricant : 100mm dia.Bend 87.5º | 25 | Nos. | |
| 94 | 94 | Coupler (Socket) | 5 | Nos. | |
| 95 | 95 | Plain Tee | 5 | Nos. | |
| 96 | 96 | Providing and fixing Water Closet Seat Covers with brass hinges complete. Solid (PVC) (IS 2548 marked) grade - I black for EWC | 5 | Nos. | |
| 97 | 97 | Providing and fixing Jet Spray for water closet with C.P. Copper Tube flange of approved make | 5 | Nos. | |
| 98 | 98 | Providing and fixing Divertors of superior quality and approved make. C.P. Brass Tip-tone divertor bath spout with Concealed Two Way with 22 Cm. pipe flange. | 1 | Nos. | |
| 99 | 99 | P&F gun-metal Non-return Valve or Check Valve (IS : make) of approved make, superior quality :15mm dia nominal bore, Horizontal | 5 | Nos. | |
| 100 | 100 | 25mm dia nominal bore, Horizontal | 5 | Nos. | |
| 101 | 101 | Providing and fixing Mixing Range (15 mm). C.P. Sink mixer with swinging spout J-Pipe. | 1 | Nos. | |
| 102 | 102 | Providing and fixing Soap Dish or Tray of approved quality / make.C.P. Brass (Heavy & Superior Quality) | 5 | Nos. | |
| 103 | 103 | WVC (1st quality IS 2556 Marked) recessed size 380mm | 1 | Nos. | |
| 104 | 104 | Providing and fixing Towel Rail or Ring of approved quality / make. C.P. Brass Towel Ring revolving type. | 2 | Nos. | |
| 105 | 105 | Providing and fixing G.I. pipes (Internal Work) with G.I. fittings (IS : 1239 Mark) & MS Clamps, including cutting and making good the walls and floors. Exposed on wall \"B\" Class. 50mm dia nominal bore. | 5 | Rmt | |
| 106 | 106 | P&F full-way valve (IS:778 mark) or wheel valve of approved make : Gun metal 50mm nominal bore. | 1 | Nos. | |
| 107 | 107 | Providing and fixing Inlet Connection (Angle, Valves) Superior quality, of approved make.for wash basin Gyser etc. C.P. Inlet connection with 37 cm long pipe and nut. | 5 | Nos. | |
| 108 | 108 | P&F WVC Wash Basin (1st quality IS:2556 mark) of approved make with CI brackets duly painted, 1 no. 15mm CP Pillar cock (IS:8934 mark) & 32 mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting & making good the wall. Size 510mm × 400mm. | 4 | Nos. | |
| 109 | 109 | Providing and fixing Automatic Flushing Cistern of first quality (IS:774 mark) of approved make fitting, siphon with copper tube, C.I. brackets complete including cutting and making good the wall. C.I. 5 Ltr. | 5 | Nos. | |
| 110 | 110 | Labour Charges for removing and refixing of urinals (all type & sizes) including all necessary fittings. | 4 | Nos. | |
| 111 | 111 | Labour Charges for removing WVC WC Pan Flushing cistern | 2 | Nos. | |
| 112 | 112 | Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including clamp, cutting and making good the walls & floors. (Internal Work)25 mm OD | 200 | Rmt | |
| 113 | 113 | 32mm OD | 20 | Rmt | |
| 114 | 114 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.)\napproved quality /make including joining the pipe with\nsolvent cement rubber ring and lubricant.160 mm | 20 | Rmt | |
| 115 | 115 | Providing and fixing rigid PVC Pipe fittings (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant.Bend 87.5° | 10 | Nos | |
| 116 | 116 | Providing and fixing in position collapsible steel shutters with vertical MS Channels 20 x 10 x 2 mm and bracket with flat iron diagonals 20 x 5 mm size with top and bottom rail of T-iron 40 x 40 x 6 mm with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed. | 2.5 | Sqm | |
| 117 | 117 | Q'kZ ¼doMZ ,fj;k½ dh lQkbZ dk dk;Z laosnd }kjk lQkbZ gsrq vko';d lkeku tSls >kMw fQukbZy] dhVuk'kd nokbZ bR;kfn dh O;oLFkk vius Lrj ij djuh gksxhA foHkkx }kjk vyx ls dksbZ Hkqxrku ns; ugh gksxkA 5500.00 Sqm Per Month | 30000 | Per Sqm Per Month | |
| 118 | 118 | [kqys Hkkx dh lQkbZ dk dk;Z laosnd }kjk lQkbZ gsrq vko';d lkeku tSls >kMw] dhVuk'kd nokbZ bR;kfn dh O;oLFkk vius Lrj ij djuh gksxhA foHkkx }kjk vyx ls dksbZ Hkqxrku ns; ugh gksxkA 5000.00 Sqm Per Month | 33000 | Per Sqm Per Month | |
| 119 | 119 | tu lqfo/kkWvksa dh lkQ lQkbZ dk dk;Z laosnd }kjk lQkbZ gsrq vko';d lkeku tSls >kMw] fQukbZy] dhVuk'kd nokbZ bR;kfn dh O;oLFkk vius Lrj ij djuh gksxhA foHkkx }kjk vyx ls dksbZ Hkqxrku ns; ugh gksxk 60 Nos. Per Month | 360 | Nos. Per Month |
AI Tender Summary
Tender Timeline
Sep 30, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender