Construction Of Community Hall Building At Nagrota Bagwan , Distt . Kangra ( Hp ) .
Tender Value
30.89 Lakhs
Estimated cost
Bid Submission
14 Oct 2019
0 days left
EMD
61800
Bank guarantee accepted
Document Fee
3600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota Bagwan (Kangra) → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall Building At Nagrota Bagwan , Distt . Kangra ( Hp ) .
BOQ
| Name of Work: Construction of Community Hall building at Nagrota Bagwan, Distt. Kangra (HP). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of stone masonary below G.L. Upto 1.50mtr depth including stacking of servicable materials and disposal of un-serviacable material within all leads. Rubble masonary in cement mortar. | 20.59 | Cum. | |
| 2 | 2 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto all heights and stacking the excavated soil in all specified distance. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all the surplus excavated earth as directed within all leads and lifts. | 92.39 | Cum. | |
| 3 | 3 | Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. | 14.63 | Cum. | |
| 4 | 4 | Random rubble masonary/polygonal rubble masonary un-coursed/brought courses with hard stone of approved quallity in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand). | 28.97 | Cum. | |
| 5 | 5.01 | Providing form work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor to ceiling in all heights and removal of the same for in-stu reinforced concrete and plain concrete work in:- a) Foundation, footing bases of colums etc. and mass concrete. | 23.76 | Sqm | |
| 6 | 5.02 | b) Columns, pillars, post and struts, square, rectangular or polygonal in plain. | 127.5 | Sqm | |
| 7 | 5.03 | c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. | 193.12 | Sqm | |
| 8 | 5.04 | d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. | 211.86 | Sqm | |
| 9 | 5.05 | e) For Stair cases | 14.18 | Sqm | |
| 10 | 6.01 | Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in . a) Foundation footing bases of columns etc. and mass concrete. | 11.62 | Cum. | |
| 11 | 6.02 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. | 7.95 | Cum. | |
| 12 | 6.03 | c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. | 51.37 | Cum. | |
| 13 | 6.04 | d) Stair cases | 2.48 | Cum. | |
| 14 | 7 | Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels. | 116 | Qtl. | |
| 15 | 8 | Boulder filling under floors. | 12.81 | Cum. | |
| 16 | 9 | Full Brick work using common clay burnt building bricks in superstructure above plinth level upto all heights with cement mortar 1:6 (1cement: 6 sand) 2nd class bricks. | 48.85 | Cum. | |
| 17 | 10 | Half Brick work using common clay burnt building bricks in superstructure above plinth level upto all heights with cement mortar 1:6 (1cement: 6 sand) 2nd class bricks. | 57 | Sqm | |
| 18 | 11.01 | Providing and fixing dyed/anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections to of approved make . conforming to 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868.(Minimum anodic coating of grade AC 15 ) fixed with rawplugs and screws or with fixing clips, or with expansion hold fastners i/c necessary filling up of gaps at junctions , at top , bottom and sides with frequired PVC/ Neoprene felt etc. aluminium sections shall be smooth ,rustfree ,straight ,mitred and jointed mechanically where ever required i/c cleat angle, aluminium ,snap beading for glazing /panelling C.P. brass/ stainless steel screws .All complete as per Architectural drawing and the directions of Enginner in charge.\na)For doors windows and ventilators and glazed partitions frames. | 585.55 | Kg. | |
| 19 | 11.02 | b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisionsfor fixing of fitings where ever required including the cost of PVC /neoprene gaskes as required .(fittings and glazing /panelling shall be paid for seperatly.) | 1368.6 | Kg. | |
| 20 | 12 | Providing and fixing double action hydarulic spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. Etc. Complete as per the direction of engineer in charge i/c making good in floors. | 4 | each | |
| 21 | 13 | Providing and fixing aluminium grills including fixing with aluminium U section complete in all respect. | 30.36 | Sqm | |
| 22 | 14 | Providing and fixing stainless wire gauge of IS gauge designation 85G with wire of 0.56mm to windows and clearstory window i/c U section of aluminium in beading of. | 25.62 | Sqm | |
| 23 | 15 | Providing and fixing glazing in aluminium door ,windows ,ventilators shutters and partition etc with PVC/ neoprens gaskets etc. Complete as per the architectural drawings and the direction of Engineer including aluminium snap beading and glazing. Glazing with glass panes of 5.50mm thickness(weight not less than 13.75 kg/sqm. | 24.19 | sqm | |
| 24 | 16 | Providing and fixing prelaminated board boiled water proof(BWP) phenol bonded exterior /interior grade 12 mm thick. | 46.2 | Sqm | |
| 25 | 17 | Providing and fixing aluminium sliding door bolt dyed to required colour and shade with bolts and nuts screws etc.complete. 250mm x16mm. | 5 | Each | |
| 26 | 18.01 | Providing and fixing aluminium tower bolts (barrel type) dyed to required shade with nacessry screws etc. complete. (a)200x 10mm. | 10 | Each | |
| 27 | 18.02 | (b)150x 10mm. | 190 | Each | |
| 28 | 19.01 | Providing and fixing aluminium handle dyed to required colour and shade with nacessry screws etc. complete. (a)200mm. | 10 | Each | |
| 29 | 19.02 | (b)150mm. | 164 | Each | |
| 30 | 20 | Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion,screws etc.to suit shutter thickness complete. | 5 | Each | |
| 31 | 21 | 6mm cement plaster to ceiling in cement mortar 1:4 (1cement:4sand). | 204.83 | Sqm | |
| 32 | 22 | 15mm cement plaster in single cost on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rouded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand). | 247.61 | Sqm | |
| 33 | 23 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rouded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand). | 295.93 | Sqm | |
| 34 | 24 | Providing and laying 10mm thick anti skid water proof stain and impect resistent double charge vetrified tiles Nitco or equivailent 600x600x10mm manufactured of approved shade and colour in flooring treads of steps on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement. | 159.66 | Sqm | |
| 35 | 25 | Providing and laying spartic ceremic tiles 5.5 mm thick in flooring (300x300mm size) treads or steps laid on abed of 12mm thick cement mortar 1:3(1cement:3sand)finished with flush pointing in white cement. | 21.66 | Sqm | |
| 36 | 26 | Digital wall tiles 6mm thick in skirting risers or steps and dado on 12mm thick cement plaster 1:3(1cemen:3sand) and jointed with white cement slurry. | 33.94 | Sqm | |
| 37 | 27 | Providing and laying granite stone in flooring 20mm (avg) thickness base of cement mortar 1:3 (1 cement :3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing and moulding of edges complete. | 14.7 | Sqm | |
| 38 | 28 | Applying Birla white care wall putty over plaster surface after throughly brushing the surface free from mortor drops ,dust ,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. | 748.37 | Sqm | |
| 39 | 29 | Distempering(two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droping and other foreign matterand also including preparing the surface even and sand papered smooth priming coat with distemper primer. | 452.44 | Sqm | |
| 40 | 30 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt dust and other foreign matter etc including sand paper smooth. | 295.93 | sqm. | |
| 41 | 31 | Providing and fixing on wall face PVC (D-Plast)rain water pipe of working pressure not less than 4kg/sqm. including filling the joints with approved adhesive complete.100mm dia pipes. | 32 | Rmt. | |
| 42 | 32 | Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipe of working pressure including filling the joints with approved adhesive complete.150mm dia PVC plain bend. | 12 | each | |
| 43 | 33 | Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:- In gratings framed guard bars,ladders,railing brackets and similar works. | 21.89 | qtl | |
| 44 | 34 | Providing plinth protectin 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate 20mm nominal size)including finishing the top surface of concete smooth .Under layer for plinth protection of 75mm thick (un-consolidated)bed of dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. | 23.06 | sqm | |
| 45 | 35 | Painting two coats(excluding priming coat)on steel and other metal surfaces with enamel paint,brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter.Enamel paint other than white. | 85.75 | sqm | |
| 46 | 36 | Applying priming coat over new steel & other metal surface after including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead, red oxide /zinc oxide chrome. | 85.75 | sqm | |
| 47 | 37 | Providing and laying interlocking paver tiles 80mm thick as per technical specification clause 1504. | 45 | sqm | |
| 48 | 38.01 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked working pressure not less than 4.5kg/Sqm i/c fixing with approved adhesive etc. complete. (a) 110mm diameter. | 60 | mtr | |
| 49 | 38.02 | (b) 75mm diameter. | 30 | mtr | |
| 50 | 39.01 | Providing and fixing on wall face PVC accessories rain water pipes including filling the joints with approved adhesive complete. (a) 110mm diameter. (Plain/bend) | 10 | each | |
| 51 | 39.02 | (b) 75mm diameter. | 10 | each | |
| 52 | 40.01 | Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall ceilling and floor . A)15 mm nominal bore. | 70 | mtr | |
| 53 | 40.02 | (b) 20mm nominal bore. | 20 | mtr | |
| 54 | 41 | Providing and fixing PVC floor trap ISI marked of self cleaning design i/c fixing with approved adhessive cost of cutting and making good the wall and floors etc. 110mm x 90mm | 8 | each | |
| 55 | 42 | Providing and fixing vitreous china wash down water closet (European type WC pan)with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement:1sand) (Seat and cover to be measured and paid for separetly) | 2 | each | |
| 56 | 43 | Providing and fixing 10.00/12.50/15.00 ltrs PVC low level flushing cistern with apair of CI or mild steel brackets complete with fittings | 2 | each | |
| 57 | 44 | Providing and fixing GI inlet connection for flush pipe with WC pan. | 2 | each | |
| 58 | 45 | Providing and fixing plastic seat(Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers:- Solid type white plastic seat and cover. | 2 | each | |
| 59 | 46 | Providing and fixing jet for WC seat. | 2 | each | |
| 60 | 47 | Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm. | 2 | each | |
| 61 | 48 | Providing and fixing vitreous China squatting plate pattern urinal of size 450mm x 350mm with integral longitudinal flush pipe. | 2 | each | |
| 62 | 49 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P.waste with C.I.or M.S. brackets painted white i/c cutting hole and making good the same excluding fittings size 610x410x200mm. | 1 | each | |
| 63 | 50 | Providing and fixing CP brass waste for wash basin or sink 32 mm dia. | 2 | each | |
| 64 | 51 | Providing and fixing PVC waste pipe for wash basin or sink 32 mm dia. | 2 | each | |
| 65 | 52 | Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap. | 8 | each | |
| 66 | 53 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers. | 2 | each | |
| 67 | 54 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm. | 2 | each | |
| 68 | 55 | Providing and fixing CP brass bib tap with capastan head 15 mm dia. | 6 | each | |
| 69 | 56 | Providing and fixing CP brass pillar tap with capstan head 15 mm dia. | 4 | each | |
| 70 | 57 | Providing and fixing CP stop cock 15mm dia. | 9 | each | |
| 71 | 58 | Providing and fixing PVC connection pipe with brass unions 30 cms length 15mm nominal size. | 6 | Each | |
| 72 | 59 | Providing and fixing brass full way valve with wheel 15mm nominal size. | 4 | Each | |
| 73 | 60.01 | Providing and fixing GI or MI union (a) 15 mm nominal size. | 4 | Each | |
| 74 | 60.02 | (b) 20mm nominal size | 5 | Each | |
| 75 | 61 | Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws. | 2 | Each | |
| 76 | 62 | Providing and fixing PVC water storage tank of ISI - 12701 marked GI inlet and outklet connection 15mm nominal bore Ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all height above Ground level (Double core)500 ltrs capacity. | 2 | Each | |
| 77 | 63 | Constructing man hole with RCC top slab in 1:2:4 mix. (1cement :2sand:4graded stone agreegate 20mm nominal size),foundation concrete 1:4:8(1cement:4 sand:8 graded stone agreegate 40mm nominal size),inside plastering 15 mm thick with cement mortar 1:3(1cement:3 sand) finished with a floating coat of neat cement and making channels in cement concret 1:2:4(1cement :2 sand:4 graded stone agreegate 20mm nominal size)finished. (a) smooth complete including curring and testing. Inside size 800x800mm and 500mm deep including CI cover with frame (light duty single seat patern 1) 450x610mm internal diamention total weight of cover and frame to be not less than 38 Kg.(weight of cover 23 Kg and (i) weight of frame 15 Kg.)With 230mm thick walls of brick masonary using common brunt clay building bricks in cement mortar 1:3 (1 cement :3 sand). | 6 | Each |
AI Tender Summary
Tender Timeline
Sep 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 15, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender