Relaying Of Bt Road Surface At Race Course Entrance To Prc Dipo Back Side In Ward No43 . Relaying Of Bt Road Surface At Race Course Entrance ToPrc Dipo Back Side In Ward No43 .
Tender Value
22.48 Lakhs
Estimated cost
Bid Submission
09 Oct 2019
0 days left
EMD
22480
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Relaying Of Bt Road Surface At Race Course Entrance To Prc Dipo Back Side In Ward No43 . Relaying Of Bt Road Surface At Race Course Entrance To Prc Dipo Back Side In Ward No43 .
BOQ
| Name of Work: Relaying of BT Road Surface at Race Course Entrance to PRC Dipo Back Side in Ward No:43. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply Pipes. The rate inclusive of all charges such as Earth work and remove the same 2Km away from the site etc., complete as per standard specification | 90 | m3 | |
| 2 | 2.01 | Providing and laying, spreading and compacting 0.396 m3 of 45-22.40mm & 0.528m3 of 22.40-2.3mm &0.396m3 of 2.36mm and below metal graded stone aggregates to wet mix(WMM) specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with pavers in Sub base/base course on well prepared surface and compacting with vicratory roller to acheive the desired density, complete as per clause 406 of MORTH Specifications | 37 | m3 | |
| 3 | 3.01 | Providing and laying Prime coat of 7 Kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for appling the required quantity of bitumionus binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications. | 240 | m2 | |
| 4 | 4.01 | Providing and laying tack coat of 2.5 Kgs/10 sqm over the Prime surface treated with brinder using 2.5 Kgs of bituminous Emulsion for 10 square meter area incliding cost of bituminous binder, including cost of bituminous binder, including labour charges for applying the required quanity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications. | 240 | m2 | |
| 5 | 5.01 | Providing and laying tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications | 3345 | m2 | |
| 6 | 6.01 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per lOsqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 Morth Rev-5 | 180 | m3 | |
| 7 | 7.01 | Providing and laying bituminous concrete 40mm thick using 0.13 cum of 19.00 mm 9.50mm,0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30 kgs of VG30/VG40 bitumen for premixing per 10sq.m including cost and convwyance of 11 materials to CMP site heating the bitumen and aggregate to requried Temperature and mixing them in requried in central hot mix plant 20-30 ton capacity ,conveying the mix by tipper trucks to paver ite spreading the mix to uniform thickness of 40mm with meachnical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory/Pneumatic roller to the requried density etc.including laour for attending to the paver to the site20-30t CMP with bitumen boiler,tipper trucks,Paver Finishe /9mPaver Finisher,Vibratory/Pneumatic roller and roll Other tools and plant Requried,including fuel and all other incidental charges etc.as per Specfication using CMP as per Clause 507 of MORTH Rev-5 | 108 | m3 | |
| 8 | 8.01 | Road marking with hot applied thermoplastic compound with reflect rising glass based on bituminous surface providing and laying of hot applied thermoplatic compound 205mm thick including reflect rising glass beads @ 250 gms. Per. Sqm areas, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35, the finished surface to be level, uniform and free from streaks and holes etc. complete (as per MORT & H specifications No. 803). | 57 | m2 |
AI Tender Summary
Tender Timeline
Sep 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 10, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender