Construction Of Office Building For Home Gaurd Compeny Commender At Karsog Construction Of Of Building Work Including Water Supply And Sanitation
Tender Value
29.54 Lakhs
Estimated cost
Bid Submission
14 Oct 2019
0 days left
EMD
52000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karsog → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building For Home Gaurd Compeny Commender At Karsog Construction Of Of Building Work Including Water Supply And Sanitation
BOQ
| NAME OF WORK:- CONSTRUCTION OF OFFICE BUILDING FOR HOME GUARD COMPANY COMMANDER AT KARSOG, DISTT MANDI (H.P) ( SH:-C/O building work i/c water supply and sanitary installations) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting in Earth work in all kind of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil, de-watering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 1485.22 | cum | |
| 2 | 2 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 136.35 | cum | |
| 3 | 3 | Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge in | |||
| 4 | 3.01 | Foundation ,footing basis of columns etc. And mass concrete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 95.35 | sqm | |
| 5 | 3.02 | Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness all as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . | 219.06 | sqm | |
| 6 | 3.03 | Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels any depth in all heights from floor as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 147.65 | sqm | |
| 7 | 3.04 | Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 78.37 | sqm | |
| 8 | 3.05 | Stair case with sloping or stepped soffits excluding landing as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 25.14 | sqm | |
| 9 | 3.06 | Edges of slab and breaks in floor and walls under 20cm wide as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 112.96 | rmt | |
| 10 | 3.07 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses plinth and string courses and the like Inculdings carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 95.97 | sqm | |
| 11 | 4 | Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. | 4.37 | cum | |
| 12 | 5 | Providing and laying, mechanically mixed and vibrated cement concrete 1:5:10 (one cement:five sand ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. | 10.74 | cum | |
| 13 | 6 | Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 (one cement:Six sand Twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. | 8.08 | cum | |
| 14 | 7 | Providing and laying, mechanically mixed and vibrated cement concrete 1:8:16 (one cement:Eight sand Sixteen graded crushed stone aggregate 20 mm (Twenty millimeter) nominal size) and curing complete on slab and floor excluding the cost of form work but including all leads and lifts of materials in screed laid under flooring and as per direction of Engineer -in -charge. | 1.5 | cum | |
| 15 | 8 | Providing and laying cement concrete 1:1.5:3 (one cement : one & half sand : three graded crushed stone aggregate 20mm nominal size) mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge in :- | |||
| 16 | 8.01 | Foundation ,footing basis of columns etc and mass concrete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 36.37 | cum | |
| 17 | 8.02 | Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 48.83 | cum | |
| 18 | 8.03 | Staircases (except spiral stair case) excluding landing but including preparing of top surface and finishing of nosing for all floor complete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 2.19 | cum | |
| 19 | 8.04 | Column, pillars, posts and structs square, rectangular ,polygonal, circular or curved in plan as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.. | 7.05 | cum | |
| 20 | 8.05 | Walls any thickness but not less then 0.1 mtr thickness)attached pilasters buttresses plinth and string courses etc from top of foundation level up to all heights including carriage of material with in all leads lifts and other incidentals complete in all respect. | 11.24 | cum | |
| 21 | 9 | Providing and laying mechanically mixed and Vibrated cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20 mm nominal size for reinforced concrete chhajas not exceeding 10cm thickness up to all floor level including finishing the exposed surface with cement mortar 1:3(one cement:three sand )to give a smooth and even surface ,form work and curing complete excluding the cost of reinforcement as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 3.92 | cum | |
| 22 | 10 | Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending ,binding and placing in position and cost of binding wire as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 13356 | kg | |
| 23 | 11 | Random rubble masonry uncoursed but brought to course with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 one cement:six sand including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.with in all leads lifts and other incidentals. | 20.51 | cum | |
| 24 | 12 | Boulder filling under floors including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . | 38.18 | cum | |
| 25 | 13 | Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand ) in super structure up to all floor levels including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 50.57 | cum | |
| 26 | 14 | Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand )in super structure up to all floor levels including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 81.5 | sqm | |
| 27 | 15 | Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 1.91 | cum | |
| 28 | 16 | Providing 40 X 3 mm (forty into three millimeters ) flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 130 | Each | |
| 29 | 17 | Providing and fixing 40 mm (forty millimeters )thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 35.18 | sqm | |
| 30 | 18 | Glazing with glass pan 5.5 mm (five point five millimeters)thick plain glass panes with deodar wood beading as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 24.6 | sqm | |
| 31 | 19 | Providing and fixing 40 mm (forty millimeters) thick wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milometers )for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screw of second class deodar wood including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 14.59 | sqm | |
| 32 | 20 | Providing and fixing 25 mm (twenty five millimeters ) thick commercial board water proof shutters for cupboard including fixing with nicle plated piano hinges with screws etc. complete including carriage of material within all leads and lifts and other incidentals. | 14.29 | sqm | |
| 33 | 21 | Providing and fixing 1 mm (twenty five millimeters ) thick coloured or plain lamination sheet sun mica on boards/plywood sheet with approved adhesive and nails etc. complete including carriage of material within all leads and lifts and other incidentals. | 14.29 | sqm | |
| 34 | 22 | Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 35 | 22.01 | 250 x 16 mm (Two hundred five into sixteen millimeters) | 17 | each | |
| 36 | 23 | Providing and fixing aluminium tower bolts (barrel type) anodized and transparent or dyed to required colour and shade with the screws etc complete as per direction of the engineer in charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 37 | 23.01 | 200 mm X 10 mm (Two hundred millimeters Into ten millimeters) | 40 | each | |
| 38 | 23.02 | 100 mm X 10 mm (One hundred fiftymillimeters Into ten millimeter) | 64 | each | |
| 39 | 24 | Providing and fixing aluminium handels anodized or dyed to required colour and shade with the necessary screws etc. complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 40 | 24.01 | 100 mm (hundred millimeters size) | 32 | each | |
| 41 | 24.02 | 125 mm (One hundred twenty five millimeters size ) | 34 | each | |
| 42 | 25 | Providing and fixing 200 mm (Two Hundred millimeters) Bright Finished hard drawn hooks eyes including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 16 | each | |
| 43 | 26 | Providing and fixing 65 x 35 mm special quality bright finished cup board locks or ward robe locks with six lever including necessary screws etc including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 3 | each | |
| 44 | 27 | Providing and fixing chromium plated brass 50 mm cup board /ward robe knobs with nuts including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 6 | each | |
| 45 | 28 | Providing and fixing 100 mm bright finished brass floor Door stopers with rubber cushion screws etc to suit shutter thickness complete including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 17 | each | |
| 46 | 29 | Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 498.75 | kg | |
| 47 | 30 | Providing and fixing 10 mm ( ten mm) thick water proof stain and impact resistent heavy duty (double charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and jointed with cement slurry including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 97.71 | sqm | |
| 48 | 31 | Providing and laying spartic cermic tiles 5.5 mm (five point five millimeter )thick of khajaria,nitco or jonson make in flooring (300 x 300 mm size) treads of steps laid on bed of 12 mm thick cement mortar 1: 3 ( one cement : three sand) finished with flush pointing in white cement including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 15.17 | sqm | |
| 49 | 32 | Providing and fixing Galzed tiles of size 450 x 300 mm x 6 mm (four hundred fifty x three hundred x six millimeter) thick in skirting risers of steps and dado on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors. The sample and pattern of tiles should be got approved before fixingas required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 61.32 | sqm | |
| 50 | 33 | Providing and laying Kota stone slab flooring in 20 mm (twenty millimeter average) thick base of cement mortar 1:4 (one cement : four sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (25 mm thick) as per design and pattern approved as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 94.65 | sqm | |
| 51 | 34 | Providing and laying Kota stone slab 25 mm (twenty five average) thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve milimeter average) thick cement mortar 1:3 (one cement :three sand ) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as per pattern approved as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 19.2 | sqm | |
| 52 | 35 | Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and pre polished machine cut for kitcken platform ,vanity counters ,window sills facias and similar locations of requird size, approved shade colour nd texture laid over 20mm thick base cement mortar 1:4 (one cement :four sand )joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 2.6 | Sqm | |
| 53 | 36 | Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In : | |||
| 54 | 36.01 | Grating framed guard bars ladders railing brakets and similar works as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 4.94 | Qtl. | |
| 55 | 37 | Providing and fixing rolling shutters of approved make made of 80mm x1.25mm MS Laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft with bracket side guides and arrangements for inside and out side locking with push pull operation complete but excluding the cost of top cover and spring including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 8.88 | sqm | |
| 56 | 38 | Providing and fixing 27.50 centimeter long wire spring grade no -2 for rolling shutters including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | Each | |
| 57 | 39 | Providing and fixing top cover for rolling shutters including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 3.23 | Mtr. | |
| 58 | 40 | Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (one cement : two sand : four stone aggregated 20 mm nominal size )and cost of cutting holes and making good the walls etc.100 mm diameter for C.I pipes including carriage of materialas required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 15 | Each | |
| 59 | 41 | Providing and fixing on wall face PVC (D-plast) rain water pipes of workng pressure not less than 4.50 kg/sqm including filling the joints with approved adhesive complete 100 mm dia pipes including carriage of materialas as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | 26.56 | Mtr. | |
| 60 | 42 | Providing and fixing on wall face PVC (D-plast)accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 61 | 42.01 | PVC plain bend 100 mm diameter | 4 | Each | |
| 62 | 42.02 | PVC plain shoes 100 mm diameter | 4 | Each | |
| 63 | 43 | Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead , red oxide/zinc oxide crome including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 55.45 | SQM | |
| 64 | 44 | Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 80.14 | SQM | |
| 65 | 45 | Applying priming coat on new wood and wood based surfaces with readymix paint brushing wood pink primer after and including preparing the surface thoroughly cleaning oil grease, dirt, other foreign matter sand papering and knotting etc. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 168.71 | SQM | |
| 66 | 46 | Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 168.71 | SQM | |
| 67 | 47 | 6 mm (six millimeter) thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 269.26 | SQM | |
| 68 | 48 | 15 mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement : six sand ) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 955.21 | SQM | |
| 69 | 49 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 725.13 | SQM | |
| 70 | 50 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 725.13 | SQM | |
| 71 | 51 | Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 460.62 | SQM | |
| 72 | 52 | Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 460.62 | SQM | |
| 73 | 53 | Providing under layer for plinth protection of 75 mm (seventy five millimeters ) thick (unconsolidated ) bed of dry brick /stone broken/crushed aggregate 40mm (forty millimeters ) nominal size well rammed & consolidated & grouted with fine sand including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 25.2 | SQM | |
| 74 | 54 | Providing plinth protection 50 mm (Fifty Millimeters )thick in cement concrete 1:3:6 (one cement :three sand :six graded/ crushed stone aggregate 20 mm nominal size including finishing the top surface of concrete smooth finfish including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 25.2 | SQM | |
| 75 | 55 | Brick edging (brick laid on edge) to plinth protection with bricks including grouting with cement mortar 1: 4 (one cement : four sand) with brick size 22.90 x 11.2 x 7 cm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 44.9 | MTR | |
| 76 | 56 | Constructing course rubble hammer dressed U shape open surface drain with side wall 15x22cm in cement mortar 1:6 (one cement:six sand )and inside plastering with cement mortar 1:3(one cement:three sand)icluding earth work and laying 10cm cement concrete in 1:5:10(one cement:five sand:ten graded stone aggregate 40mm nomonal size and 7.5 cm cement concrete 1:2:4(one cement:two sand :four graded stone aggregate 20mm nominal size and finished with a floatingcoat of neat cement including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 44.9 | MTR | |
| 77 | 57 | Providing and laying cement concrete flooring 1:2:4 one cement:two sand:four crushed stone aggregate 20 mm nominal size laid in one layer finished with a floating coat of a neat cement including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 7.2 | Sqm | |
| 78 | 58 | Providing and laying brick bats 50 mm size including carriage of material with all leads and lifts and other incidentals including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 7.09 | cum | |
| 79 | 59 | Providing and laying C.I manhole cover 50cm dia including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 2 | each | |
| 80 | 60 | Providing and laying 200mm cast iron rings with chequred or ribited non soli surface including and fixing in main holes with 200x200x200mm cement concrete 1:3:6 stone of 20mm nominal size including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 20 | each | |
| 81 | 61 | Providing and fixing vitreous china wash down water closet (European type W.C. pan) of Cera ,Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | EACH | |
| 82 | 62 | Providing and fixing 10.00/12.50/15.00 liters vitreous china low level flushing cisterns of Cera ,Hindware or equvalent with a pair of cast iron or mild steel brackets complete with fitting such as lead valve less syphon, 15mm (fifteen millimeters) nominal size brass ball valve with polythene float, chromium plates brass handles unions and couplings for connections with inlet, outlet and over flow pipe 40mm (forty millimeters) die chromium plates flush bend including cutting holes in walls and making good the same and connecting the flush bend with cisterns and closet (over flow) pipe tube measured and paid for separately including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 83 | 63 | Providing and fixing in position brass mosquito proof couplings for over flow pipe of 25 mm ( twenty five millimeters) nominal dia (over flow pipe tube measured and paid for separately) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 84 | 64 | Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 85 | 65 | Providing and fixing galvanished iron inlet connection for flush pipe with water closet pan including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 86 | 66 | Providing and fixing vitreous china wash basin of Cera, Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials upto all leads and lifts in all floors | |||
| 87 | 66.01 | Flat back 550 x 400 mm (Five hundred fifty millimeters into four hundred millimeters) | 4 | EACH | |
| 88 | 67 | Providing and fixing vitreous china pedestal for washbasin of Cera ,Hindware or equvalent complete recessed at the back for reception of pipe and fitting including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | EACH | |
| 89 | 68 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same with fitting, size 610 X 510 mm with bowl depth 200 mm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | EACH | |
| 90 | 69 | Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.. | 5 | EACH | |
| 91 | 70 | Providing and fixing 32 mm dia (thirty two millimeters ) M.I. union for wash basin or sink complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 92 | 71 | Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass S trap for wash basin and sink including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 93 | 72 | Providing and fixing 100 mm dia (one hundred millimeters ) sand cast iron grating of Ess-Ess, Jaguar or equvalent for gully floor or Nahni trap including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 94 | 73 | Providing and fixing CP brass bib tap (superior or heavy quality of Ess-Ess ,Jaguar or equvalent make) 15 mm (fifteen millimeters) dia with capstan head i/c CP concealing flange complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 95 | 74 | Providing and fixing 15 mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads i/c CP concealing flange of Ess-Ess ,Jaguar or equvalent make complete in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 96 | 75 | Providing and fixing CP brass angle valve 15 mm without nuts and pipe i/c CP concealing flange of Ess-ess, Jaguar or equvalent make including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 15 | each | |
| 97 | 76 | Providing and fixing CP brass bib tap (superior or heavy type) of Ess-Ess ,Jaguar or equvalent make) 15mm (fifteen millimeters) dia with long body i/c CP concealing flange including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 10 | each | |
| 98 | 77 | Providing & Fixing Mixer for Kitchen sink i/c CP concealing flange of Ess-ess, Jaguar or equvalent make with casted swing spout at top including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | each | |
| 99 | 78 | Providing and fixing CP stop cock of Ess-ess ,Jaguar or equvalent make i/c CP concealing flange including carriage of material with in all leads and lifts 15 mm (fifteen millimeters) nominal bore including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 15 | each | |
| 100 | 79 | Providing and fixing 600 mm x 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 101 | 80 | Providing and fixing CP brass towel rail of Ess-Ess ,Jaguar or equvalent makecomplete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 102 | 81 | Providing and fixing 600 mm x 20 mm (six hundred into twenty millimeters) glass self with CP brass brackets and guard rail complete fixed to wooden plug with CP brass screws including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 103 | 82 | Providing and fixing toilet papers holders chromium plated brass complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 104 | 83 | Providing and fixing PTMT Zet sprayer with 1.00 mtr tubeincluding carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 105 | 84 | Providing and fixing PVC connection with brass union 300/450 mm length including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 106 | 84.01 | 15 mm (fifteen millimeters) size. | 4 | each | |
| 107 | 85 | Providing and fixing PTMT soap dish with holder of approved quality and colour with steel screw and rawal plug including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 4 | each | |
| 108 | 86 | Providing and fixing brass Full way valve with wheel including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 109 | 86.01 | 15 mm (fifteen millimeters) nominal bore | 2 | each | |
| 110 | 86.02 | 20 mm(twenty millimeters) nominal bore | 2 | each | |
| 111 | 87 | Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 112 | 87.01 | 15 mm (fifteen millimeters) nominal bore | 75 | mtr | |
| 113 | 87.02 | 20 mm (twenty millimeters) nominal bore | 25 | mtr | |
| 114 | 88 | Providing and laying 20 mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 25 | mtr | |
| 115 | 89 | Providing and fixing G.I/M.I union of following nominal size including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 116 | 89.01 | 15 mm (fifteen millimeters) size. | 5 | EACH | |
| 117 | 89.02 | 25 mm (twenty Five millimeters) size | 5 | EACH | |
| 118 | 90 | Making connection of gal vanished steel distribution branch with gal vanished mild steel main 20mm to 40mm (twenty millimeters to forty millimeters) nominal bore by providing and fixing tee including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | EACH | |
| 119 | 91 | Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 1 | EACH | |
| 120 | 92 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 mmX 75 mm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | 5 | EACH | |
| 121 | 93 | Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 122 | 93.01 | 75 mm nominal size (seventy five millimeters) size | 25 | MTR | |
| 123 | 93.02 | 110 mm nominal size(one hundred ten millimeters) size | 25 | MTR | |
| 124 | 94 | Providing and fixing PVC single equal branch with ovel access door of D-plast make , ISI marked insertion rubber washer 3 MM thick bolts and nuts including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 125 | 94.01 | 110 mm (one hundred ten millimeter Dia ) | 4 | EACH | |
| 126 | 94.02 | 75 mm (Seventy five millimeters Dia ) | 4 | EACH | |
| 127 | 95 | Providing and fixing PVC door band with oval access door insertion rubber washer 3 MM thick bolts and nuts of D-plast make ISI marked complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 128 | 95.01 | 110 mm (one hundred ten millimeter Dia ) | 4 | EACH | |
| 129 | 95.02 | 75 mm (Seventy five millimeters Dia ) | 4 | EACH | |
| 130 | 96 | Providing and fixing PVC collars of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 131 | 96.01 | 75 mm (Seventy five millimeters Dia ) | 5 | EACH | |
| 132 | 96.02 | 110 mm (one hundred ten millimeter Dia ) | 5 | EACH | |
| 133 | 97 | Providing and fixing PVC Plain bend of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 134 | 97.01 | 75 MM (Seventy five millimeters Dia ) | 2 | EACH | |
| 135 | 97.02 | 110 MM (one hundred ten millimeter Dia ) | 2 | EACH | |
| 136 | 98 | Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I cover with frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. and curing complete. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 137 | 98.01 | Inside dimensions 455 mm x 610 mm x 450 mm deep for single pipe line | 3 | EACH | |
| 138 | 98.02 | Inside dimensions 600 mm x 850 mm x 450 mm deep for pipe line with three or more inlets | 3 | EACH |
AI Tender Summary
Tender Timeline
Sep 27, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 15, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender