Aryankavu Lp School Maintanance
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Oct 2019
0 days left
EMD
17830
Bank guarantee accepted
Document Fee
1428
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ARYANKAVU → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Aryankavu Lp School Maintanance
BOQ
| Work Name:Aryankavu grama panchayath 2019-20,Aryankavu LP school maintanance | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | AUDITORIUM ROOF CEILING | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 12.59.1 : Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process. | BI01010001010000000000000515BI0100001114 | 163.421 | sqm |
| 3 | 1.002 | 13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001115 | 132.13 | sqm |
| 4 | 1.003 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001116 | 132.13 | sqm |
| 5 | 2 | INTERLOCK LAYING | BI01010001010000000000000515BI0100001117 | ||
| 6 | 2.001 | od142429/2019_2020 : Surface dressing of the ground in All kinds of soil including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.<br> | BI01010001010000000000000515BI0100001118 | 392.102 | sqm |
| 7 | 2.002 | od142435/2019_2020 : Interlocking Concrete Block Pavement Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 60 mm as per drawing and Technical Specification Clause 1504.<br> | BI01010001010000000000000515BI0100001119 | 425.401 | sqm |
| 8 | 2.003 | od142795/2019_2020 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>IV.R.C.C grade M 20 | BI01010001010000000000000515BI0100001120 | 1.412 | cum |
| 9 | 3 | CLUSTER ROOM MAINTANANCE | BI01010001010000000000000515BI0100001121 | ||
| 10 | 3.001 | 15.11.1 : Removing mortar from and cleaning stones and concrete articles ( net quantity of stacks of cleaned materials will be measured):In lime mortar | BI01010001010000000000000515BI0100001122 | 9.715 | cum |
| 11 | 3.002 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 0.486 | cum |
| 12 | 3.003 | 11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001124 | 53.8 | sqm |
| 13 | 3.004 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001125 | 152.55 | kg |
| 14 | 3.005 | 14.67.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work ( Two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface | BI01010001010000000000000515BI0100001126 | 223.06 | sqm |
| 15 | 3.006 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001127 | 5.67 | sqm |
| 16 | 3.007 | 14.55.1 : Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001128 | 40.65 | sqm |
| 17 | 3.008 | 14.61 : Painting (one or more coats) with black japan paint of approved brand and manufacturing to given an even shade. | BI01010001010000000000000515BI0100001129 | 14.65 | sqm |
| 18 | 3.009 | 14.60 : Re- lettering with black japan paint of approved brand and manufacture. | BI01010001010000000000000515BI0100001130 | 600 | per Letter per cm height |
AI Tender Summary
Tender Timeline
Sep 27, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender