Sharing tender

Supply and testing of TEFC horizontal foot mounted 30 HP slip ring induction motor of reputed brand suitable for stator voltage 415 V+/-10%, frequency 50Hz, continues rating (SI Duty), synchronous speed 1000 rpm, protection IP 55, rotor volt 330, rotor amps 37, class F insulation, power factor not less than 0.8, and other parameters of motor conform to IS -325 and IS – 12615 with suitable fully automatic combined stator and rotor starter comprise of air break contactors with over current, under voltage, single phase preventer, set of accelerating contactor along with automatic timing devices for stator and rotor, start, stop and reset push buttons, remoter operation for start and stop, isolator, metering instruments and cable glands, resistance unit either of nichrome round or flat strip or cast stainless steel grids, indicators for main on/ off overload, trip, number of starts are two per hour at 100% starting torque, control circuit volts 110 V AC, 50 Hz etc. conform to latest IS amendments. (wiring diagram of starter should be supplied along with starter and standard test certificate of motor should be submitted)