Regularly Deploye Technically Staff With Skt Lift For comprehensive Maintenance Of Street Light Luminaries , Switching System , Overhead Under Ground Street Light System An Also Maintain Which Are Required But Not Done By Eesl ( Soorsagar 1To22 , 65 ) , contractor must be depolyed technical qualified , insured , and simillar work experince holder for comprehansive street light system ( under ground/overhead ) , switching system and etc required two team for maintain street light system i . e . line fault , line jumper , highmast cimbing and other not done by eesl including required leader , equipment , tools , sky lift , etc at its own . as per direction of engineering incharge . a . as per requirment of jmc identified and trace out fault from existing under ground cabling system work ( median , park , road side and etc ) pole to pole connectivity supply , line jumper , branch and other work not done by eesl . replacing as per direction of engineering incharge . b . as per requirment of jmc coordinate with discom related staff dor trace out fault in existing overhead line , any other work given by engineering incharge . c . as per site requirement contractor must do tree cutting in prescribe time . d . removing of existing all type luminaries in all respect including loading , unloading and transportation upto jmc store in all direction of engineering incharge . e . fixing of new/old street lights luminaires on existing pole , wall in all respect and also connection with road light phase wire and tested ok including loading , unloading , transportation upto site , jmc store f . lt line spacers must be used by contractor where ever equired at there own g . immediate attend and take needful action on accedental pole within time as soon possible with all required labour , tools , vechiles as direction of engineering incharge . , regularly operation & maintenance of electronics pole mounting dusk down photo cell timer , clock type timer , on-off panel 63/100amp rating main switch . by required replacment all defective accessories which are burnet , broken and missing such as air break , contractor , ( l&t/bch male ) 3 pole mccb , single pole mccb , solar plate , electronic/micro controllor , copper strip lead wire insulator , hard ware . upto supply sources . and also regularly maintain log sheet of time on-off and must be intimate to site incharge / engineering incharge & if any type of need from juvvnl immediate to inform related office and any type required help to take them . for 25/40/ 63/100 amp rating ( 3-phase/1-phase ) , regularly operation & maintenance of manual main switch operatted on-off & including all need full replacemen by defective , burnt , and broken accessories such as kitkit fuse , handle unclip fuse wire hrc fuse copper strip connecting rode etc . mainten log sheet and time to time intimate to site incharge / engineer in charge & if any type of need from juvvnl immediate to inform related office and any type required help to take them . , regularly operation & maintenance of existing fluorescent tube fixture ( 36/40watt ) by need full replacement with all defectives missing and broken accessories in all respect as per direction of engineering incharge . , regularly operation & maintenance of existing sodium & mh fitting ( 70/150/250watt ) including pole/wall/tp pole/oct pole//zb pole/dl/etc by need full replacement with all defectives missing and broken accessories in all respect as per direction of engineering incharge . , regularly operatin & maintanance of existing leds lights w including pole/wall/tp pole/oct pole//zb pole/etc by need full replacement with all defectives missing and broken accessories in all respect as per direction of engineering incharge . , regularly operation maintanance of existing high-mast lights ( sv/mh/led ) in all respect & all accessories with timer switch & panel with replacment of defective accessories as required as per direction of engineering incharge .
