Mangalapuram Gp- 2019-20- Community Hall Maintenance
Tender Value
13.38 Lakhs
Estimated cost
Bid Submission
03 Oct 2019
0 days left
EMD
33480
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mangalapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mangalapuram Gp- 2019-20- Community Hall Maintenance
BOQ
| Work Name:Mangalapuram GP-2019-20- Community hall maintenace | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Community hall maintenance | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001114 | 286.309 | sqm |
| 3 | 1.002 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001115 | 6 | each |
| 4 | 1.003 | 15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet | BI01010001010000000000000515BI0100001116 | 286.44 | sqm |
| 5 | 1.004 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001117 | 190 | kg |
| 6 | 1.005 | 12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001118 | 286.44 | sqm |
| 7 | 1.006 | 12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | BI01010001010000000000000515BI0100001119 | 21.7 | metre |
| 8 | 1.007 | 12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth) | BI01010001010000000000000515BI0100001120 | 43.4 | metre |
| 9 | 1.008 | 50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001121 | 27 | metre |
| 10 | 1.009 | 14.5.1 : Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001122 | 5.04 | sqm |
| 11 | 1.01 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001123 | 30 | kg |
| 12 | 1.011 | 50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001124 | 0.324 | cum |
| 13 | 1.012 | 50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001125 | 6.342 | sqm |
| 14 | 1.013 | 50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | BI01010001010000000000000515BI0100001126 | 3.228 | sqm |
| 15 | 1.014 | 50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | BI01010001010000000000000515BI0100001127 | 5.919 | sqm |
| 16 | 1.015 | 50.14.1.1 : Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001128 | 2 | each |
| 17 | 1.016 | 50.14.1.2 : Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001129 | 7 | each |
| 18 | 1.017 | 50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | BI01010001010000000000000515BI0100001130 | 1.042 | cum |
| 19 | 1.018 | 26.24.1 : Providing and fixing in position wall panelling at all heights with integral\ndensified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise\nReduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance\nof 85% (minimum). Non combustible as per BS:476 (part-4), fire performance\nas per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <\n0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially\nfabricated galvanised mild steel sheet 0.50 mm thick pressed section\n(galvanizing @120 grams per sqm including both sides) i.e.vertical studs of\nsize 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling\nchannel section of size 50 x 32m fixed to the floor and soffit at 600mm centers\nusing 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with\n10mm bolt. This same channel is then to be fixed in horiziontal direction at\n600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of\n50mm thickness is then to be inserted in the slots and finally calcium silicate\nnon combustible panels/tiles are to be screw fixed with self tapping pan head\nnickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an\neven groove of 1 mm between the panels. The joints between the panels are to\nbe duly jointed and finished using recommended jointing calcium silicate based\ncompound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of\nprimer suitable for panelling as per manufacturer's specification as per\ndirection of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicatepanels/ tiles | BI01010001010000000000000515BI0100001131 | 75.211 | sqm |
| 20 | 1.019 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001132 | 93.252 | sqm |
| 21 | 1.02 | 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001133 | 56.664 | sqm |
| 22 | 1.021 | 13.8.1 : 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand) | BI01010001010000000000000515BI0100001134 | 102.23 | sqm |
| 23 | 1.022 | 21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | BI01010001010000000000000515BI0100001135 | 60 | kg |
| 24 | 1.023 | 50.12.5.1 : Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | BI01010001010000000000000515BI0100001136 | 208 | sqm |
| 25 | 1.024 | 51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | BI01010001010000000000000515BI0100001137 | 4.681 | cum |
| 26 | 1.025 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001138 | 46.801 | sqm |
| 27 | 1.026 | 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001139 | 559.701 | sqm |
| 28 | 1.027 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001140 | 149.916 | sqm |
| 29 | 1.028 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001141 | 957.312 | sqm |
| 30 | 1.029 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001142 | 62.513 | sqm |
| 31 | 2 | Rewiring | BI01010001010000000000000515BI0100001143 | 300000 | LS |
AI Tender Summary
Tender Timeline
Sep 25, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 09, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender